I've account access level of developer. I want to create app specific password but go through the account but could not get any option to do so. Can somebody help me on this. Thanks in advance.

Environment Devices: e.g., iPhone 12 mini, iPhone 16 (multiple units) OS: iOS 26 beta 2 and beta 4 (23A5297m) Distribution: Apple Enterprise Program (In-House), deployed via MDM InstallApplication Tooling: Xcode (latest available for iOS 26 betas) Summary Apps signed for Enterprise (In-House) distribution install successfully on iOS 26 betas via MDM, but terminate immediately on launch. The same builds run if installed from Xcode on the same devices. This is a regression from pre-iOS 26 versions where Enterprise builds installed via MDM launched normally. Steps to Reproduce Archive an iOS app and export for Enterprise (In-House) distribution. Deploy the .ipa via MDM using InstallApplication to a device on iOS 26 beta (e.g., 23A5297m). Tap the app icon to launch. Actual Result The app quits instantly on launch. System logs show launchd/runningboard errors, including NSPOSIXErrorDomain Code=85 (“Bad executable (or shared library)”): runningboardd(RunningBoard)[34]: Process start failed with Error Domain=NSPOSIXErrorDomain Code=85 "Bad executable (or shared library)" UserInfo={NSLocalizedDescription=Launchd job spawn failed} runningboardd(RunningBoard)[34]: Launch failed with Error Domain=NSPOSIXErrorDomain Code=85 "Bad executable (or shared library)" SpringBoard(FrontBoard)[35]: Bootstrapping failed ... NSUnderlyingError = { NSLocalizedDescription = Launchd job spawn failed; } Expected Result Enterprise-signed builds installed via MDM should launch as they did on iOS 25.x and earlier. Regression? Works on iOS versions prior to 26. Works on iOS 26 betas when installed from Xcode (developer-signed run). Fails only for Enterprise (In-House) builds delivered via MDM. Additional Notes / Possibly Related We also reproduced a similar failure mode with a minimal Safari Web Extension project: it installs and appears under Settings → Safari → Extensions, but enabling it and opening Safari produces: “ is no longer available.” Building a fresh project with a new bundle ID shows the same behavior on iOS 26 beta (23A5297m). Logs contain: Error occurred during transaction: The provided identifier "" is invalid. Running from Xcode (debug build) works. Workarounds None identified for Enterprise/MDM distribution. Only Xcode-installed builds run. Impact Blocks Enterprise deployment to our fleet on iOS 26 betas. Feedback / Attachments Included: sysdiagnose from an affected device, minimal Xcode project demonstrating the issue, Enterprise-exported app, and reproduction notes. Happy to share additional logs or perform targeted tests if needed. Request Can Apple confirm whether this is a known regression vs. a policy/validation change in iOS 26 for Enterprise/MDM installs? Any guidance on a short-term mitigation or build/signing change we can apply would be appreciated.

I'm are attempting to use the device management migration feature in Apple Business Manager / Apple School Manager (for devices running iOS 26 / iPadOS 26) to re-assign managed devices from one MDM server to another. We followed the published procedure (select device(s) → Assign Device Management → Set deadline → Continue). However, we are observing that on the device side, no notification or prompt appears to the user (such as “Enrollment Required” or “Your organization requires this device to enroll in a different device management service”), even after the migration deadline has passed. Here are the environment details: Device OS version: (iOS 26.1) Device ownership: enrolled via Automated Device Enrollment MDM re-assignment in ABM: old MDM server（name: https://dev5.clomo.com/panel/mackey-dev/ ） → new MDM server (name: https://obliging-bunny-equally.ngrok-free.app/ ) Deadline set: (12/10/2025 12:00 AM) Network connectivity: confirmed online at deadline time We would like to know: Under what exact conditions will the device display the notification/prompt, and what common mis-configurations prevent it from appearing? Is there any device log or activity indicator in ABM/ASM to confirm that the migration instruction has been sent to the device? In cases where the prompt does not appear, what troubleshooting steps can we perform on the device (or in the MDM/ABM configuration) to correct it?

We are facing an issue with Platform SSO registration on macOS devices for AD-bound user accounts with Microsoft EntraID configuration. We are using the Platform SSO payload on macOS devices integrated with Entra ID, and it works as expected — registration completes successfully, and the password syncs with the Entra ID password. However, when we try the same on macOS devices with AD-bound (mobile) user accounts, the registration does not complete. To elaborate, the process successfully completes the initial WebView authentication but fails at the stage where Apple prompts for the password to sync the local macOS user’s password with the Entra ID password. It does not display any error, and even after entering a valid password, the process does not proceed further. However, when we try the same on a non-AD user account, it works fine. We have checked with Microsoft, and they confirmed that there are no restrictions on their side for AD-bound accounts. Since the issue appears to occur at the Apple system level, they advised us to reach Apple teams on this. Could you please check and let us know how we can proceed with this? Payload used: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>PayloadContent</key> <array> <dict> <key>AuthenticationMethod</key> <string>Password</string> <key>ExtensionIdentifier</key> <string>com.microsoft.CompanyPortalMac.ssoextension</string> <key>PayloadDisplayName</key> <string>Extensible Single Sign-On Payload</string> <key>PayloadIdentifier</key> <string>com.apple.extensiblesso.B408A658-3DAF-41FF-8A5D-AE77B380CB7B</string> <key>PayloadType</key> <string>com.apple.extensiblesso</string> <key>PayloadUUID</key> <string>D506CAFD-C802-41F2-9C3E-DF5289C315FF</string> <key>PayloadVersion</key> <integer>1</integer> <key>PlatformSSO</key> <dict> <key>AccountDisplayName</key> <string>EntraID</string> <key>AuthenticationMethod</key> <string>Password</string> <key>EnableCreateUserAtLogin</key> <true/> <key>LoginFrequency</key> <integer>3700</integer> <key>LoginPolicy</key> <array> <string>AttemptAuthentication</string> </array> <key>NewUserAuthorizationMode</key> <string>Admin</string> <key>UseSharedDeviceKeys</key> <true/> <key>UserAuthorizationMode</key> <string>Admin</string> </dict> <key>ScreenLockedBehavior</key> <string>DoNotHandle</string> <key>TeamIdentifier</key> <string>UBF8T346G9</string> <key>Type</key> <string>Redirect</string> <key>URLs</key> <array> <string>https://login.microsoftonline.com</string> <string>https://sts.windows.net</string> <string>https://login.partner.microsoftonline.cn</string> <string>https://login.chinacloudapi.cn</string> <string>https://login.microsoftonline.us</string> <string>https://login.microsoft.com</string> <string>https://login-us.microsoftonline.com</string> </array> </dict> </array> <key>PayloadDisplayName</key> <string>Platform SSO</string> <key>PayloadIdentifier</key> <string>42GBHOLAP04621.1BD5B6D9-640B-4DC3-9275-56DDD191A5FB</string> <key>PayloadType</key> <string>Configuration</string> <key>PayloadUUID</key> <string>58548FC6-38D9-4B28-9EDF-BEEAB03BAB23</string> <key>PayloadVersion</key> <integer>1</integer> </dict> </plist>

We’re using the Apple Developer Enterprise Program for internal app distribution. The Apple ID is a generic one using our domain email, but the Account Holder is a real person with authority in the organization. For the payment method, we plan to use a corporate credit card — but it is issued under a different staff name (e.g. card under Chief, but Account Holder is IT Head). Just want to check: • Is this setup acceptable? • Will Apple reject the enrollment/renewal if the card name doesn’t match the Account Holder? • What’s the best practice in this case to avoid delays or verification issues? Appreciate any guidance or experience from the community. Thanks!

Hello Developers, We are encountering a consistent Kernel Panic issue on an iPhone device after sending a "Clear Passcode" command via our MDM solution. We're looking for insights or confirmation if others have experienced similar behavior. Device & Environment Details: Device: iPhone13,2 (iPhone 12 Pro) OS Version: iPhone OS 18.3.2 (Build 22D82) (Please note this appears to be a future/beta build identifier) Action Triggering Panic: Sending MDM ClearPasscode command. Roots Installed: 0 (Device is not jailbroken) Incident ID: 4B41C0AE-EE93-4051-BEE4-AB98438C10F0 Panic Log Summary: The kernel panic log clearly indicates the issue originates from the Secure Enclave Processor (SEP). The key panic string is: panic(cpu 3 caller 0xfffffff02357bc1c): SEP Panic: :sks /sks : 0x1000b15fc 0x0003ad60 0x0003ad44 0x100028698 0x10002cae4 0x10002a908 0x10002bc10 0x100045330 [hgggrhlvs] Panic app vers: 1827.80.10 Panic app UUID: 4C066E88-EB93-33C3-BCA7-C5F5474831CC ... Root task vers: AppleSEPOS-2772.80.2 Root task UUID: A39D6C5D-D07D-33EE-85A3-9105A8D93CE2 ... sks /sks 0x329cc/0x326e0/0x1314131413141314 ert/BOOT Use code with caution. The SEP Panic and reference to :sks /sks strongly suggest an issue within the Secure Key Store subsystem of the SEP. The panic occurred on CPU core 3. The kernel backtrace points to the com.apple.driver.AppleSEPManager kernel extension as the immediate caller in the main kernel that initiated the panic process after receiving the signal from the SEP. Analysis/Interpretation: Based on the log, it appears that the MDM ClearPasscode command, which necessarily interacts with the SEP's Secure Key Store via the AppleSEPManager driver, triggered an internal fault or bug within the SEP firmware (AppleSEPOS). This SEP-level panic subsequently caused the main iOS kernel to panic. Questions: Has anyone else encountered similar SEP panics, specifically involving the SKS subsystem, particularly after issuing MDM commands like ClearPasscode on iOS 18.x builds (especially 18.3.2 / 22D82)? Is this a known issue in this specific iOS/SEP firmware version? Are there any suggested workarounds for clearing passcodes via MDM on affected devices/OS versions, or any further diagnostic steps recommended? We appreciate any insights or shared experiences the community might have on this issue. Thank you.

During VPP app installation, the app-device asset association event took longer than the usual maximum of 30 seconds to complete, regardless of the number of app licenses involved.

Hello, My Apple Developer account is currently stuck in an Individual to Organization migration state. The organization verification was declined earlier, but the migration flag is still active on my account. Because of this, my membership benefits are temporarily disabled and I cannot submit new app builds for review. I already contacted Apple Developer Program Support and opened a case. Case ID: 102826815891 However, I have not received a response yet and my account is still locked in the migration state. Has anyone experienced this issue before or know how it can be resolved? Thank you.

I am having an issue with duplicated SCEP client certificates on an iOS device. We deployed an SCEP profile via MDM, then deleted and redeployed it via MDM. In Settings > General > VPN & Device Management, only one SCEP profile is visible. However, Safari shows duplicated certificates when a server requests a client certificate. We have tried removing the cert profile on MDM and unenrolling the device from MDM, but only the latest certificate got removed, leaving previous ones stuck on the device or in the Safari app. We have found no way to remove these duplicated certificates other than factory reset the devices. This appears to be a potential iOS bug affecting certificate cleanup. We need assistance to resolve this issue. Also, the issue is difficult to reproduce but has happened to a number of our managed devices.

I am trying to correctly manage about 20 Mac, iPhones and PC inside a Wi-Fi network built through System Settings > Sharing > Internet Sharing To achieve this task I defined a complete configuration file: /etc/bootpd.plist which is used by /usr/libexec/InternetSharing. But every time /usr/libexec/InternetSharing is starting the file /etc/bootpd.plist is overwritten by another file and my configuration is thus fully lost. How to set a correct /etc/bootps.plist file and avoid its total overwrite by /usr/libexec/InternetSharing? Is it necessary to write this bootpd.plist in some other directory for /usr/libexec/InternetSharing to load it without destroying it? I got the same configuration total erase on macOS Big Sur and Sequoia.

Hi, I’m testing the ClearPasscode MDM command: https://developer.apple.com/documentation/devicemanagement/clear-passcode-command Question: If a user enters the passcode incorrectly multiple times and the device becomes temporarily locked (e.g., “Try again in X minutes”) or reaches “Security Lockout”, can ClearPasscode still be executed successfully while the device is in that state? {'ErrorCode': 5013, 35708 'ErrorDomain': 'MCPasscodeErrorDomain', 35709 'LocalizedDescription': '\xe3\x81\x93...x89', 35710 'USEnglishDescription': 'The passcode cannot be cleared (-1)'} If it depends on conditions (e.g., supervised vs. user enrollment, availability of UnlockToken, network/check-in state), could you clarify which conditions are required? Thank you.

The profile expiration date is approaching, and no amount of inquiries will solve it. Create a new profile Download a new profile from Xcode Press archive, press Distribute App, press Enterprise, and distribute Invalid expiration date in profile of summary of review app.ipa content I've tried everything that comes out by Googleing profiles, such as regenerating profiles, erasing caches, updating Xcode, updating macOS, deleting existing profile information, etc. Expiration date different from the expiration date of the profile created in that menu is displayed. The expiration date of the profile I created is December 8, 2026, and the previous certificate is January 22, 2026. However, the profile information of the generated ipa is February 12, 2026. So I can't distribute this app because I'm scared, and the expiration date is coming up. Users should have a period of time to update. Get me a novice developer who's choking up.

We’re running into a problem when deploying certain .pkg installers via MDM on macOS 15 and above. The installation fails with the following error message: “The app is running and we don’t have the context to quit it, failing install.” Context: The .pkg is being pushed through an MDM solution (not installed manually). This happens consistently across multiple macOS 15+ devices. The target app is often already running when the MDM tries to install the update. Unlike a manual installation, the MDM does not appear to have the ability to quit the running app before proceeding. Questions: Is this a known change in macOS 15 where MDM-delivered installs no longer have permission to terminate apps during package installation? Are there recommended best practices for handling app updates via .pkg through MDM in this scenario? Has anyone implemented a workaround—such as pre-install scripts, user notifications, or policies to quit the app before running the installer—that works reliably on macOS 15? Is Apple planning to update MDM behavior or installer APIs to address this, or should admins expect to handle quitting apps entirely outside of the MDM installation process? Any insights from Apple engineers or other developers/admins who have encountered this would be really helpful.

I am using system_profiler command to check on the installed application list from mac device. **Terminal command to check installed java version - ** But while running /usr/sbin/system_profiler SPApplicationsDataType -xml , I cant able to find Java as an installed application. Is this a known issue or do we have any alternative workaround to fetch the same?

Our organization is deploying passwordless authentication. Instead of using a password, employees must use the Microsoft Authenticator app to complete the login process. Unfortunately, employees with passwordless authentication can't complete the login on the Wi-Fi Captive portal with SAML authentication. The reason is that when an employee switches to the Microsoft Authenticator app, the Apple CNA (Apple Network Captive Assistant) disappears. As a result, the authentication process breaks. According to the https://developer.apple.com/news/?id=q78sq5rv source, iOS 14+ devices support the RFC-8908 standard. Unfortunately, we couldn't find a reliable source on how this feature works on iOS devices. The question is: Is it possible to automatically forward Wi-Fi clients to the SAML authentication portal in the default browser app (for example, Safari) after connecting an employee to Wi-Fi?

Background / Objective We are currently developing a solution to centrally manage Apple OS updates (major and minor) across managed macOS devices. Before implementing at scale, we need Apple’s guidance on supported and future-proof update mechanisms under MDM. Questions / Ask (Apple Guidance Requested) Apple recommended method What is Apple’s recommended approach to perform: Minor updates (e.g., macOS X.Y → X.Z) Major upgrades (e.g., Ventura → Sonoma) in an enterprise fleet? Support boundary Is macOS update management only supported via MDM (including any newer declarative workflows), or are local mechanisms (installer + command-line tooling) also considered supported for enterprise automation? Use of startosinstall Can we leverage the existing utility: /Applications/Install macOS .app/Contents/Resources/startosinstall for automated upgrades in enterprise environments? If yes, are there recommended flags/workflows Apple endorses for unattended or minimally interactive upgrades? Long-term support / stability Does startosinstall have any form of long-term support / stability guarantees across future macOS releases? Are there any known deprecations planned (or guidance that customers should transition to MDM/DDM workflows)? MDM interaction / interference When using startosinstall, can MDM policies (software update deferrals/restrictions, update enforcement, etc.) interfere with or block the upgrade? If interference is expected, what is the correct supported way to coordinate: MDM software update settings local startosinstall execution to avoid failures and ensure compliance? What We Need From Apple (Desired Outcome) A clear statement of recommended and supported update workflow(s) for enterprise managed macOS: for minor updates for major upgrades Guidance on whether startosinstall is acceptable for long-term automation, or whether we should only use MDM/DDM-driven workflows. Any best practices or reference documentation Apple recommends for implementing this safely and reliably.

It's a great platform to grow your knowledge. Apple Teacher

Can I upload custom app onto the ABM? if yes then how can we install it into the user's devices?

I applied over a month ago and haven't heard back to the Apple Small Business Program. What should I do to speed things up?

Hello! I’m testing certificate issuance using a locally running Smallstep step-ca ACME server with the device-attest-01 challenge. I’ve created a custom MDM profile for this purpose. When I install the profile, the certificate is issued successfully, but it is not saved to the Keychain as stated in the documentation. I can only see the certificate via mdmclient or in the Wi-Fi settings dropdown menu. Is this expected behavior, or are there additional settings that need to be included in the MDM profile?