Recently, we received an user enquiry regarding the inability to perform bookings for the app. After investigation, we found that the issue appears to be caused by the failure of the Apple DeviceCheck service. Based on our checks, approximately 0.01% of requests fail each day (e.g., on 26 June: 6 failures out of 44,544 requests) when using Apple DeviceCheck. Could you please assist in raising the following enquiries with Apple Support? What is the typical failure rate of Apple DeviceCheck? Are there any reliability metrics or benchmarks for its performance? How can the failures be prevented, or is there a recommended retry mechanism to handle such failures? Does the iOS version affect the performance or reliability of Apple DeviceCheck? Are there known issues or limitations with specific iOS versions? How long does the token remain valid, and when should a new one be retrieved? Does using a jailbroken device affect the functionality of Apple DeviceCheck?

Hi, I'm using webauthn.io to test my macOS Passkey application. When registering a passkey whichever value I set for User Verification, that's what I get when I check registrationRequest.userVerificationPreference on prepareInterface(forPasskeyRegistration registrationRequest: any ASCredentialRequest). However, when authenticating my passkey I can never get discouraged UV on prepareInterfaceToProvideCredential(for credentialRequest: any ASCredentialRequest). In the WWDC 2022 Meet Passkeys video, it is stated that Apple will always require UV when biometrics are available. I use a Macbook Pro with TouchID, but if I'm working with my lid closed, shouldn't I be able to get .discouraged?

In these threads, it was clarified that Credential Provider Extensions must set both Backup Eligible (BE) and Backup State (BS) flags to 1 in authenticator data: https://developer.apple.com/forums/thread/745605 https://developer.apple.com/forums/thread/787629 However, I'm developing a passkey manager that intentionally stores credentials only on the local device. My implementation uses: kSecAttrAccessibleWhenUnlockedThisDeviceOnly for keychain items kSecAttrTokenIDSecureEnclave for private keys No iCloud sync or backup These credentials are, by definition, single-device credentials. According to the WebAuthn specification, they should be represented with BE=0, BS=0. Currently, I'm forced to set BE=1, BS=1 to make the extension work, which misrepresents the actual backup status to relying parties. This is problematic because: Servers using BE/BS flags for security policies will incorrectly classify these as synced passkeys Users who specifically want device-bound credentials for higher security cannot get accurate flag representation Request: Please allow Credential Provider Extensions to return credentials with BE=0, BS=0 for legitimate device-bound passkey implementations. Environment: macOS 26.2 (25C56), Xcode 26.2 (17C52)

I've made my first app and encountered an unexpected (potentially existential) issue. The Manager app is designed to tag 3rd party "plugins" used by a DAW, storing metadata in a local SQLite database, and move them between Active and Inactive folders. This allows management of the plugin collection - the DAW only uses what's in the Active folder. Permissions are obtained via security-scoped bookmarks on first launch. The app functions as intended: plugin bundles move correctly and the database tracks everything. No information is written to the plugins themselves. The Problem:
When moving plugins using fs.rename() , the MAS sandbox automatically adds the com.apple.quarantine extended attribute to moved files. When the DAW subsequently rebuilds its plugin cache, it interprets quarantined plugins as "corrupt" or potentially malicious and refuses to load them. Technical Details: Moving files with NSFileManager or Node.js fs APIs within sandbox triggers quarantine Sandboxed apps cannot call xattr -d com.apple.quarantine or use removexattr() The entitlement com.apple.security.files.user-selected.read-write doesn't grant xattr removal rights User workaround: run xattr -cr /path/to/plugins in Terminal - not acceptable for professional users Question:
Is there any MAS-compliant way to move files without triggering quarantine, or to remove the quarantine attribute within the sandbox? The hardened-runtime DMG build works perfectly (no sandbox = no quarantine added). Any insight appreciated!

Hello everyone. Hope this one finds you well) I have an issue with integrating a FIDO2 server with ASAuthorizationController. I have managed to register a user with passkey successfully, however when authenticating, the request for authentication response fails. The server can't validate signature field. I can see 2 possible causes for the issue: ASAuthorizationPlatformPublicKeyCredentialAssertion.rawAuthenticatorData contains invalid algorithm information (the server tries ES256, which ultimately fails with false response), or I have messed up Base64URL encoding for the signature property (which is unlikely, since all other fields also require Base64URL, and the server consumes them with no issues). So the question is, what encryption algorithm does ASAuthorizationController use? Maybe someone has other ideas regarding where to look into? Please help. Thanks)

Hi Apple Developer Support, I’m building a macOS app that acts as a default browser. I can confirm that I can set it correctly through System Settings → Default Web Browser. The app implements ASWebAuthenticationSessionWebBrowserSessionHandling to intercept Single Sign-On (SSO) flows. To handle requests, it presents SSO pages in a WKWebView embedded in a window that this app creates and owns - this works perfectly for the initial login flow. However, after I close my WebView window and then launch Safari or Chrome, any subsequent SSO requests open in the newly-launched browser instead of my custom browser, even though it remains selected as the default in System Settings. I’d appreciate any insight on why the system “hands off” to Safari/Chrome in this scenario, and how I can keep my app consistently intercepting all ASWebAuthenticationSession requests. Here are the steps that break down the issue: Launch & confirm that the custom default browser app is the default browser in System Settings → Default Web Browser. Trigger SSO (e.g., try to log in to Slack). App’s WKWebView appears, and the SSO UI works end-to-end. Close the WebView window (I have windowShouldClose callback where I cancel the pending session). Manually launch Safari or Chrome. Trigger SSO again. Observed behaviour: the login URL opens in Safari/Chrome. I am using macOS 15.3.2

Our app uses Sign in with Apple. In recent weeks (or months), we've noticed that emails sent to @privaterelay.appleid.com addresses are not being delivered. We're not receiving any bouncebacks or error messages from the mail server, but the emails never reach the user's mailbox. We've also checked spam folders, with no luck. We have verified that our Email Sources are configured correctly in Apple Developer settings. Is there any way to debug or trace what might be happening with these messages? Thanks in advance!

On iOS 26, QuickLookAR (ARQuickLookPreviewItem) shares the actual .usdz file via the system Share Sheet instead of the original website URL. This is a regression from iOS 17–18, where sharing correctly preserved and sent only the source URL. Repro steps: 1. Open a web-hosted USDZ model in QuickLookAR (Safari). 2. Tap Share. 3. Share via any messenger. 4. The full .usdz file is sent. Expected: Share Sheet sends only the original URL. Actual: Share Sheet sends the USDZ file. Impact: Uncontrolled distribution of proprietary 3D assets. Critical IP / data leak. Blocks production AR deployments relying on QuickLook. Environment: iOS 26.0–26.1, iPhone 14 / 15. Works as expected on iOS 17–18. Test case: https://admixreality.com/ios26/

Hi everyone, I'm currently working on a native macOS app (built with SwiftUI) and I'm trying to implement Password AutoFill functionality so users can use their saved credentials from Keychain or third-party password managers. I've gone through Apple's documentation, WWDC sessions, and sample code, but I've noticed that the resources primarily focus on iOS and web implementations. There's very limited guidance specifically for macOS. I've set up: Associated Domains entitlement with the webcredentials: service The apple-app-site-association file on my server TextField with .textContentType(.username) and SecureField with .textContentType(.password) However, I'm still not seeing the expected AutoFill behavior on macOS like I would on iOS. Has anyone successfully implemented Password AutoFill on a native macOS app? Are there any macOS-specific considerations or additional steps required that differ from iOS? Any guidance, sample code, or pointers to documentation I might have missed would be greatly appreciated.

Hello Team, We’ve recently started receiving reports from our customer base (Trellix) regarding issues with Full Disk Access (FDA) for Trellix binaries on macOS devices running Tahoe 26.1 (released on November 3, 2025). The issue occurs when users attempt to add Trellix CLI binaries under FDA to grant the required permissions; the binaries fail to appear under the FDA settings, even after selection. Upon further investigation, this appears to be a macOS 26.1–specific issue and not observed in earlier versions. Similar reports have been noted across various forums, indicating that the issue affects multiple binaries, not just Trellix: Some of the discussions on the same issue I see online. https://developer.apple.com/forums/thread/806187 https://developer.apple.com/forums/thread/806156 https://forum.logik.tv/t/macos-26-1-installation-issue-wait-before-updating/13761 https://www.reddit.com/r/MacOS/comments/1os1ph3/cant_add_anything_to_privacy_security_full_disk/ I have also logged FB21009024 for the same. We would like to understand when we can expect this to be fixed, since the issue persists even in 26.2 Beta and also whether the workaround of dragging and dropping the binaries can still be suggested?

The One-time codes documentation details how to enable autofill for SMS based codes. However, there is no details about how to correctly implement autofill for email based codes. I am observing the email based autofill works inconsistently when using email based OTC. In my application: There is latency of 10-15 seconds from when the email arrives to when it is available for autofill. After the autofill feature is used, the OTC email is not being deleted from the inbox automatically. Without documentation, it's unclear to me what I might be doing wrong that is causing these side effects. I found an ietf proposal for how autofill with email based codes might work, but it’s unclear if this is how Apple has implemented the feature: https://www.ietf.org/archive/id/draft-wells-origin-bound-one-time-codes-00.html#name-email Existing docs for Autofill using SMS: https://developer.apple.com/documentation/security/enabling-autofill-for-domain-bound-sms-codes

Our background monitoring application uses a Unix executable that requests Screen Recording permission via CGRequestScreenCaptureAccess(). This worked correctly in macOS Tahoe 26.0.1, but broke in 26.1. Issue: After calling CGRequestScreenCaptureAccess() in macOS Tahoe 26.1: System dialog appears and opens System Settings Our executable does NOT appear in the Screen Recording list Manually adding via "+" button grants permission internally, but the executable still doesn't show in the UI Users cannot verify or revoke permissions Background: Unix executable runs as a background process (not from Terminal) Uses Accessibility APIs to retrieve window titles Same issue occurs with Full Disk Access permissions Environment: macOS Tahoe 26.1 (worked in 26.0.1) Background process (not launched from Terminal) Questions: Is this a bug or intentional design change in 26.1? What's the recommended approach for background executables to properly register with TCC? Are there specific requirements (Info.plist, etc.) needed? This significantly impacts user experience as they cannot manage permissions through the UI. Any guidance would be greatly appreciated. Thank you

Hi. I enter a password using the security command at the command line. It appears in the keychain access app, but not in the passwords app. I don't understand why. rickhedin@Ricks-MacBook-Pro zalando % security add-generic-password -U -s "birds" -a "cats" -w "dogs" rickhedin@Ricks-MacBook-Pro zalando % rickhedin@Ricks-MacBook-Pro zalando % security find-generic-password -s "birds" -wa "cats" dogs rickhedin@Ricks-MacBook-Pro zalando % I'm told the two apps are two views of the same data, so I guess some filter must be being applied?

Hi, I'm trying to implement web-browser SignIn with Apple with my new app. I'm trying to "Associate your website to your app" like described in this doc: https://developer.apple.com/help/account/capabilities/configure-sign-in-with-apple-for-the-web So I created a Service ID for this specific login. I want this login page to display my app icon and name when presented to users. My issue: When I associate my new app the the service, the link is somehow not working. The login page show the "service" login (with a generic apple logo and the Service ID's name) instead of the actual App name. I'v been able to link my new service to older apps succesfully !!! (the login page correctly shows the old apps icons and names) Why is my new app not associated with the service ? I am missing something here ? is there an additionnal step that I need to take in order to link the service to my newest app ? Thanks !

Title: Sporadical - Permissions Not Cleared After App Uninstallation on iOS18 I install and launch my private MAUI App I ask for example Bluetooth permissions (can be any other permission) I tap Allow button on native settings (or Don't Allow) I unistall app from real phone (we can wait for a while) I install and launch My Private MAUI App I ask for example Bluetooth permissions <- here is an issue. Bluetooth is already granted, so I cannot ask for it again. Occurrence: This issue occurs inconsistently: On iOS 18.5: approximately 5 out of 10 times On iOS 17: approximately 1 out of 50 times Tested using my automated system using Appium latest. After each scenario I unistall app using: "mobile: removeApp" with bundleId

If a user triggers account revoke on their Apple ID—but does not perform an in-app account deletion—will Apple send a server-to-server notification to inform us of this revoke event? Additionally, in this scenario, if the user later wants to restore access to their existing game account data (for example, by re-binding Sign in with Apple or switching to another login method), are developers expected to restore all previously linked game data, or should the revoke event be treated as a permanent loss of authorization?

https://developer.apple.com/news/?id=j9zukcr6 starting from Jan 2026 there is change in requirements for account notifications for Sign in with Apple. Does this apply only to developers based in South Korea or all apps which are avai via the korean App Store?

I noticed, that even though my AutoFill Credential Provider Extension works with Safari for both Passwords and Passkeys, it doesn't work in context menus inside arbitrary textfields, meanwhile the same is true for the Apple Passwords app. This is a great hit to AutoFill productivity, as my extension is unable to fill textfields by just going to the context menu and clicking AutoFill > Passwords.. Is this a feature only available to Apple via private APIs, or is this something I can interface with? I checked and the Passwords app does use some undocumented but non-private entitlements: [Key] com.apple.authentication-services.access-credential-identities [Value] [Bool] true I also checked the responsible executable for some hints (AutoFillPanelService) however found nothing that would lead me to believe this is a public extension point. Another idea I had was trying to use a macOS Service for this, however Services in the "General" category won't show up in any context menu, only in the Application's Main Menu.

I'm looking to implement USB monitoring for FIDO2 authentication through a custom Authorization Plugin, specifically for the below ones. This plugin applies to the following macOS authorization mechanisms: system.login.console — login window authentication system.login.screensaver — screensaver unlock authentication The goal is to build a GUI AuthPlugin, an authorization plugin that presents a custom window prompting the user to "Insert your FIDO key”. Additionally, the plugin should detect when the FIDO2 device is removed and respond accordingly. Additional Info: We have already developed a custom authorization plugin which is a primary authentication using OTP at login and Lock Screen. We are now extending to include FIDO2 support as a primary. Our custom authorization plugin is designed to replace the default loginwindow:login mechanism with a custom implementation. Question: Is there a reliable approach to achieve the USB monitoring functionality through a custom authorization plugin? Any guidance or pointers on this would be greatly appreciated.

Hi folks We have a Developer ID Application which we create using electron. We made our last release for our Application on Nov'24 which was correctly working. Using the same code, we tried creating a notarized application again which started showing the following error while opening our Application. Monterey- M2- When we directly run the dmg on the dev machine, it does not give us the prompt. But if we download it from somewhere and run, the prompt comes up even in dev machine. We executed some commands to verify the notarization: 1- spctl --assess -vv /Applications/Refresh\ Pro.app On both dev machine and non-dev machine, the output was "accepted" /Applications/Refresh Pro.app: accepted source=Notarized Developer ID origin=Developer ID Application: Prograde Digital Incorporated (*******) 2- xcrun stapler validate /Applications/Refresh\ Pro.app On dev machine, we executed this command and the output is as follows. Processing: /Applications/Refresh Pro.app The validate action worked! 3- codesign -vvv --deep --strict /Applications/Refresh\ Pro.app/ /Applications/Refresh Pro.app: valid on disk /Applications/Refresh Pro.app: satisfies its Designated Requirement We have created a bug attaching the dmg. Please suggest anything we can try to make the release out the door. Bug link- https://feedbackassistant.apple.com/feedback/16811025