Hello everyone, In my application, i have implemented authentication using ASWebauthenticationSession. However, when redirecting the user to a WKWebView, no cookies are shared, causing the session to be lost and requiring the user to log in again. Is there a way to share cookies between the two? If not, what would be the best approach to set up authentication that ensures SSO when switching to a WebView ? Thank you very much for your help !

We're integrating Sign in with Apple into our iOS app using both SwiftUI and UIKit. The Apple ID login UI appears correctly on real devices, but after tapping Continue, the system immediately stops and shows code 1001. This issue happens across multiple devices and Apple ID accounts, even with no prior login history. We’ve confirmed the following: Sign in with Apple is enabled in both Developer Portal and Xcode Capabilities Automatic signing and provisioning are set correctly Device is signed into iCloud and system time is synced Performed clean build, app reinstall, and other standard debugging steps We suspect that the sign-in process may not be completing properly due to some kind of account or server-side restriction, and we’d appreciate any insights into this behavior.

Since release of 18.4. prepareInterfaceToProvideCredential .oneTimeCode case is not called and instead prepareInterfaceForUserChoosingTextToInsert() is called. That is the wrong delegate for this case and it causes confusion for the users. Also, some TOTP fields are recognised however, the key icon button is not presented above the keyboard next to TOTP suggestions. I've also tested 18.5 and it has the same issue. provideOneTimeCodeWithoutUserInteraction works just fine.

The Passwords App is accessing websites found in the ASCredentialIdentityStore associated with a 3rd Party password management app (SamuraiSafe). This behaviour appears to be associated with looking up website favicons in order to display in Passwords. However the websites contacted are not stored in the Passwords App/iCloud KeyChain - only the 3rd Party password management app (SamuraiSafe). This is effectively leaking website information stored in the 3rd Party password management app. I first noticed this behaviour on macOS, and it appears to happen every 8 days. Today it was seen on iOS. The behaviour is revealed through the App Privacy Report on iOS (and LittleSnitch on macOS). I would not be surprised to see the Passwords App do this for websites saved in the Passwords App/iCloud KeyChain, however I believe it should not be arbitrarily testing every website found in the ASCredentialIdentityStore as reference to that website url should be entirely under the control of the end user. See attached screenshots from App Privacy Report. Filed bug with Apple: FB16682423

Hi, We are using the MSAL library to authenticate users, with SSO authentication implemented through the Microsoft Authenticator app. The problem is that once or twice a day, a prompt for forced authentication appears, indicating that silent token acquisition is failing and resulting in a requirement for forced authentication. Below are some of the logs: ================================================= 2025-08-28 11:00:05.034 [Info] [AppDelegate.swift:121] application(:didFinishLaunchingWithOptions:) > MSAL message: TID=751353 MSAL 1.8.1 iOS 18.5 [2025-08-28 10:00:05 - EC9D1457-2D70-4878-926F-553391EBC9D3] [MSAL] Silent flow finished. Result (null), error: -51115 error domain: MSIDErrorDomain 2025-08-28 11:00:05.034 [Info] [AppDelegate.swift:121] application(:didFinishLaunchingWithOptions:) > MSAL message: TID=751353 MSAL 1.8.1 iOS 18.5 [2025-08-28 10:00:05 - EC9D1457-2D70-4878-926F-553391EBC9D3] [MSAL] acquireTokenSilent returning with error: (MSALErrorDomain, -50002) Masked(not-null) ==================================================== We initially raised this issue with Microsoft, but according to them: In the app's logs, the single one failure it contains, was when the SSO extension returned the error com.apple.AuthenticationServices.AuthorizationError, -6000 during a silent call. This error code is generated by the system framework (Apple), not by our code. It indicates that the framework encountered an unexpected internal issue before or after calling the SSO extension. MSAL returning interaction_required to the client app is the most effective way to recover from this error (as you mention, after the user selects the account the app continues working as expected). Additionally, as you also mention, the interactive call is made by switching to Authenticator (not displaying a "window" without leaving Eva Lite app), which means MSAL is not able to use the SSO extension and is using the fallback to legacy authentication. The recommended next step is for the customer to request support directly from Apple as this is an issue on their side. Additionally, the customer can also try to update to the latest iOS, in case Apple has already fixed this issue. ============================================= STEPS TO REPRODUCE There is no such steps its just that this is an enterprise application which is getting used on managed devices[iPhone 14]. The device are managed using some intune policy. Platform and Version: iOS Development Environment: Xcode 15, macOS 13.6.1 Run-time Configuration: iOS 18 Please let me know if there are any solutions to resolve this problem. Thank you.

Hello. I have issue with implementing "Sign in with Apple" on my website. As folow, I have created: App ID identifier: com.livnobus.app (G2F5N5UHYZ) Service ID identifier: com.livnobus.client (B25ZN8P84U) with option enabled "Sign in with Apple" and configuration (Primary App ID and Webiste URLs) Key ID: 43N8XKUW7S with option enabled "Sign in with Apple" and configuration (Primary App ID and Grouped App Ids) When I click "Sign in with Apple" on my website (https://dev.livnobus.com/auth/login), system redirect me to https://appleid.apple.com/ and error show "invalid_client". Redirect URL on my web site is: https://appleid.apple.com/auth/authorize?client_id=com.livnobus.client&redirect_uri=https%3A%2F%2Fdev.livnobus.com%2Fauth%2Fapple%2Fcallback&scope=name%20email&response_type=code&response_mode=form_post&state=eGAgdpLrvskJc26RbTizc9TGwxnL6KAEJOf68pmO&nonce=e7c7a242-1977-47ea-9013-98820c24bfba.eGAgdpLrvskJc26RbTizc9TGwxnL6KAEJOf68pmO There was old Service ID identifier com.livnobus.app-client, for which I lost private KEY, so I have created new one: com.livnobus.client With old Service ID com.livnobus.app-client, https://appleid.apple.com/ shows me Apple form for sign in, but with new Service ID com.livnobus.client there is error "invalid_client" https://appleid.apple.com/auth/authorize?client_id=com.livnobus.app-client&redirect_uri=https%3A%2F%2Fdev.livnobus.com%2Fauth%2Fapple%2Fcallback&scope=name%20email&response_type=code&response_mode=form_post&state=eGAgdpLrvskJc26RbTizc9TGwxnL6KAEJOf68pmO&nonce=e7c7a242-1977-47ea-9013-98820c24bfba.eGAgdpLrvskJc26RbTizc9TGwxnL6KAEJOf68pmO These changes I have made last Friday, and since then I can't use "Sign in with Apple" on my website. Thanks!

We are working on a PoC iOS App to use "Sign in with Apple" on iOS. The app needs to authenticate the current user on MDM managed corporate iPads (with Shared iPad enabled) and each user having a Managed Apple ID (created in Apple Business Manager). We have started with Apple's example app: https://developer.apple.com/documentation/authenticationservices/implementing-user-authentication-with-sign-in-with-apple When we run it on a normal iPad (without MDM supervision) it works fine. When we run the same code on a managed iPad with Shared iPad enabled and Managed Apple ID's the app errors out when a user taps the "Sign in with Apple" button. A User-facing error message is displayed: “Your Apple Account cannot be used to create accounts for other apps.” And when we run the app from Xcode we see the following logs: Authorization failed: Error Domain=AKAuthenticationError Code=-7027 "(null)" UserInfo={AKClientBundleID=com.sampleapp.test2} LaunchServices: store (null) or url (null) was nil: Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} Attempt to map database failed: permission was denied. This attempt will not be retried. Failed to initialize client context with error Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} Failed to get application extension record: Error Domain=NSOSStatusErrorDomain Code=-54 "(null)" ASAuthorizationController credential request failed with error: Error Domain=com.apple.AuthenticationServices.AuthorizationError Code=1000 "(null)" Could not authenticate: The operation couldn’t be completed. (com.apple.AuthenticationServices.AuthorizationError error 1000.) We have confirmed that in ABM "Sign in with Apple" feature is enabled with "Allowed apps": "All apps". We have also confirmed that the Managed AppleIDs created in ABM have no field to provide the birthday of the user and therefore ruling out age restrictions for "Sign in with Apple". Is "Sign in with Apple" supported in MDM managed iPADs with Shared iPad enabled and managed AppleIDs? If it is supported, do we know what other configurations we need to get it to work? Do we know why "Sign in with Apple" would error out with Authorization failed: Error Domain=AKAuthenticationError Code=-7027 "(null)" UserInfo={AKClientBundleID=com.sampleapp.test2} LaunchServices: store (null) or url (null) was nil: Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, Environment: • iPadOS version: IPadOS Version 18.7 • Xcode version: Version 26.0 (17A324) • Device type: iPad Air 11-inch (M3) in Shared iPad mode • Account type: Managed Apple ID created in ABM enrolled with Intune MDM) Thank you

From watching the video on App Attest the answer would appear to be no, but the video is a few years old so in hope, I thought I would post this question anyway. There's several scenarios where I would like a notification service extension to be able to use App Attest in communications with the back end(for example to send a receipt to the backend acknowledging receipt of the push, fetching an image from a url in the push payload, a few others). Any change App Attest can be used in by a notification service extension?

Hey all, Question for the masses.... Does the Yubikey authentication have a OS dependency and it only works with a stable, public OS? Does Azure/Okta/Yubikey beta OS26? My CEO installed iPadOS 26 on his iPad and was not able to authenticate via Yubikey into our company environment. I ran the same scenario on my iPad using iPadOS 26 and I had the same results. Downgrading to iPAdOS doesn't pose these issues. I'm assuming something isn't fine-tuned yet?

We use Jamf Blueprint to deploy the managed app and identity to the iOS device (iOS 26.3 installed). Our managed app can access the identity via let identityProvider = ManagedAppIdentitiesProvider() let identity: SecIdentity do { identity = try await identityProvider.identity(withIdentifier: "myIdentity") } catch { } However, the app extension cannot access the same identity. Our app extension is notification extension that implemented UNNotificationServiceExtension APIs. We use above code in didReceive() function to access identity that always failed. The MDM configuration payload is: "AppConfig": { "Identities": [ { "Identifier": "myIdentity", "AssetReference": "$PAYLOAD_2" } ] }, "ExtensionConfigs": { "Identifier (com.example.myapp.extension)": { "Identities": [ { "Identifier": "myIdentity", "AssetReference": "$PAYLOAD_2" } ] } }, "ManifestURL": "https://example.net/manifest.plist", "InstallBehavior": { "Install": "Required" } } Is there any problem in our MDM configuration? Or the notification extension cannot integrate with ManagedApp FM?

Hello Apple Developer Support, I am experiencing an issue with Apple Sign-In and Private Relay across two separate organizations. I have a web application that supports Apple Sign-In, configured under organization ID: 62P86SVLK4. Users can log in using their Apple accounts with the Hide My Email (Private Relay) feature enabled. This web application was created a long time ago and initially only had a web component. Recently, we developed a native mobile version of this application, which also supports Apple Sign-In. However, due to business constraints, the mobile application was created under a different organization ID: T6JT35U9NW. The Issue Since the web and mobile applications are registered under different organizations, accounts created using Apple Sign-In with Private Relay are not recognized across both applications. For example: A user creates an account in the web app using Apple Sign-In with Private Relay. When they attempt to log in to the mobile app with Apple Sign-In (also using Private Relay), authentication fails because the generated Private Relay email addresses do not match between the two organizations. Question Is there any way to link Private Relay accounts across these two organizations so that users who signed up on the web application can log in to the mobile application seamlessly? I appreciate any guidance on how to resolve this issue. Best regards, Kamil Gronert

I am trying to setup remote Java debugging between two machines running macOS (15.6 and 26). I am able to get the Java program to listen on a socket. However, I can connect to that socket only from the same machine, not from another machine on my local network. I use nc to test the connection. It reports Connection refused when trying to connect from the other machine. This issue sounds like it could be caused by the Java program lacking Local Network system permission. I am familiar with that issue arising when a program attempts to connect to a port on the local network. In that case, a dialog is displayed and System Settings can be used to grant Local Network permission to the client program. I don't know whether the same permission is required on the program that is receiving client requests. If it is, then I don't know how to grant that permission. There is no dialog, and System Settings does not provide any obvious way to grant permission to a program that I specify. Note that a Java application is a program run by the java command, not a bundled application. The java command contains a hard-wired Info.plist which, annoyingly, requests permission to use the microphone, but not Local Network access.

I'm a bit confused about if using App Attest is possible in enterprise builds. It shows up under identifiers in the apple dev portal and I can add it to my provisioning file and entitlements file. But if I go to keys I cannot create a key for it. This page implies it can be used for enterprise builds: After distributing your app through TestFlight, the App Store, or the Apple Developer Enterprise Program, your app ignores the entitlement you set and uses the production environment.

We are currently trying to fix a bug when using SignIn with Apple. It appears that on some occasions we are not receiving a user's profile info (name, email) when a new account is created. After doing some investigation we believe this bug is due to the same Apple login being used as an already deleted account. ASF only appears to send profile info the very first time an Apple login is used. If that account is deleted and another is created with the same apple login we won't receive the profile info. As a result we are not in compliance with Apple's guidelines requiring that we use the provided profile info with Apple SigIn, and need to prompt users to enter it again. Is there a process in place to properly "clear" a user after their account is deleted in our system, so that the next time a user creates an account with the same Apple login, we receive their profile info again?

To use passkeys, you need to place the correct AASA file on the web server and add an entry in the Entitlements.plist, for example webcredentials:mydomain.com. This is clear so far, but I would like to ask if it's possible to set this webcredentials in a different way in the app? The reason for this is that we are developing a native app and our on-premise customers have their own web servers. We cannot know these domains in advance so creating a dedicated app for each customer is not option for us. Thank you for your help!

Recently, we received an user enquiry regarding the inability to perform bookings for the app. After investigation, we found that the issue appears to be caused by the failure of the Apple DeviceCheck service. Based on our checks, approximately 0.01% of requests fail each day (e.g., on 26 June: 6 failures out of 44,544 requests) when using Apple DeviceCheck. Could you please assist in raising the following enquiries with Apple Support? What is the typical failure rate of Apple DeviceCheck? Are there any reliability metrics or benchmarks for its performance? How can the failures be prevented, or is there a recommended retry mechanism to handle such failures? Does the iOS version affect the performance or reliability of Apple DeviceCheck? Are there known issues or limitations with specific iOS versions? How long does the token remain valid, and when should a new one be retrieved? Does using a jailbroken device affect the functionality of Apple DeviceCheck?

I'm developing a passkey manager using ASCredentialProviderViewController. I've set a custom AAGUID in the attestation object during registration: let aaguid = Data([ 0xec, 0x78, 0xfa, 0xe8, 0xb2, 0xe0, 0x56, 0x97, 0x8e, 0x94, 0x7c, 0x77, 0x28, 0xc3, 0x95, 0x00 ]) However, when I test on webauthn.io, the relying party receives: AAGUID: 00000000-0000-0000-0000-000000000000 Provider Name: "iCloud Keychain" It appears that macOS overwrites the AAGUID to all zeros for third-party Credential Provider Extensions. This makes it impossible for relying parties to distinguish between different passkey providers, which is one of the key purposes of AAGUID in the WebAuthn specification. Is this expected behavior? Is there a way for third-party Credential Provider Extensions to use their own registered AAGUID? Environment: macOS 26.2 Xcode 26.2

Hi, This issue is happening during Passkey creation. We’ve observed that approximately 1% of our customer users encounter a persistent error during Passkey creation. For the vast majority, the process works as expected. We believe our apple-app-site-association file is correctly configured, served directly from the RP ID over HTTPS without redirects, and is up-to-date. This setup appears to work for most users, and it seems the Apple CDN cache reflects the latest version of the file. To help us diagnose and address the issue for the affected users, we would appreciate guidance on the following: What tools or steps does Apple recommend to identify the root cause of this issue? Are there any known recovery steps we can suggest to users to resolve this on affected devices? Is there a way to force a refresh of the on-device cache for the apple-app-site-association file? Thank you in advance for any input or guidance.

I have filed bug reports on this to no avail, so I am bringing it up here hoping someone at Apple will address this. Since the first beta of 26.3, with voice control enabled there are now two icons in the menu bar (*plus an orange dot in full screen) that never go away. That orange microphone isn't serving its intended purpose to notify me that something is accessing my microphone if it is always displayed. I use voice control extensively, so it is nearly always on. In every prior version of macOS, the orange icon was not on for voice control. Even if voice control is not listening but simply enabled in system settings, the orange icon will be there. And there is no need for this icon to be on for a system service that is always listening. This orange icon in the menu bar at all times is incredibly irritating, as it takes up valuable space to the right of the notch, and causes other actual useful menu bar items to be hidden. As well, if some other application on my system were to turn on the mic and start recording me I would never know since that orange icon is always on. It also places an orange dot next to the control center icon taking up even more of the precious little menu bar real estate. Please fix this! Either exempt voice control (as Siri is always listening and it doesn't get the orange icon) or exempt all system services, or give me a way to turn this off. If you cannot tell, I find this incredibly annoying and frustrating.

Hello, I’m planning to develop a custom referral-based attribution system for my app. The goal is to log the number of installs that come from unique referral links and then track subsequent in‑app analytics (for example, when a user reaches level 5 in a game). I’d also like to capture the user’s country to further segment these analytics. I want to build this system myself—without relying on third‑party services (such as AppsFlyer or Branch) since I only need a few key data points and want to keep costs low. However, I’m aware of the privacy restrictions in iOS and want to ensure that my implementation complies with Apple’s guidelines. Specifically, I would appreciate guidance on the following: Permissible Signals: Is it acceptable to log signals like IP address (or a suitably anonymized version), device model, and timestamp to help correlate the referral click to a successful install and subsequent in‑app events? Are there any other recommended non‑PII signals that can be used to confirm a referral install without risking rejection during App Review? Best Practices: What are the best practices for handling and transmitting these signals (e.g., should IP addresses be truncated or hashed)? How can I ensure that my system remains compliant with Apple’s App Tracking Transparency and other privacy guidelines? I’d appreciate any insights or references to relevant documentation that might help me build this system without getting rejected by Apple. Thank you in advance for your assistance!