I’m using a custom Installer plug-in (InstallerPane) to collect sensitive user input (username/password) during install. After the payload is laid down, I need to send those values to a newly installed agent (LaunchAgent) to persist them. What I tried I expose an XPC Mach service from the agent and have the plug-in call it. On the agent side I validate the XPC client using the audit token → SecCodeCopyGuestWithAttributes → SecCodeCheckValidity. However, the client process is InstallerRemotePluginService-* (Apple’s view service that hosts all plug-ins), so the signature I see is Apple’s, not mine. I can’t distinguish which plug-in made the call. Any suggestion on better approach ?

FB18383742 Setup 🛠️ Xcode 16.4 (16F6) 📱 iPhone 13 mini (iOS 18.0.1) ⌚️ Apple Watch Series 10 (watchOS 11.3.1) Observations As AccessorySetupKit does not request "Core Bluetooth permissions", when a watchOS companion app is installed after having installed the iOS app, the toggle in the watch settings for Privacy & Security > Bluetooth is turned off and disabled After removing the iPhone associated with the Apple Watch, Bluetooth works as expected in the watchOS app Upon reinstalling the iOS app, there's a toggle for Bluetooth in the iOS ASK app's settings and the ASK picker cannot be presented 🤨 From ASK Documentation: AccessorySetupKit is available for iOS and iPadOS. The accessory’s Bluetooth permission doesn’t sync to a companion watchOS app. But this doesn't address not being able to use Core Bluetooth in a watch companion app at all 🥲 Reproducing the bug Install the iOS + watchOS apps Launch iOS app, tap "start scan", observe devices can be discovered (project is set up to find heart rate monitors) Launch watchOS, tap allow on Bluetooth permission pop-up watchOS app crashes 💥 Meanwhile, in the iOS app, there should be a log entry for 💗 CBCentralManager state: poweredOff and the ASK picker is no longer able to discover any devices The state of the device permissions: iOS app has no paired accessories or Bluetooth permission watchOS app's Bluetooth permission shown as turned off & disabled Remove the iOS app Relaunch the watchOS app Notice the CBCentralManager state is unauthorized Remove and reinstall the watchOS app Tap allow on Bluetooth permission pop-up watchOS app does not crash and CBCentralManager state is poweredOn The state of the watch permissions: Bluetooth is turned on & the toggle is not disabled Note that at this time the iOS app is not installed, there is no way to remove Bluetooth permission for the watch app. Reinstall + launch the iOS app Notice a warning in the log: [##### WARNING #####] App has companion watch app that maybe affected if using CoreBluetooth framework. Please read developer documentation for AccessorySetupKit. Notice a log entry for 💗 CBCentralManager state: poweredOn before tapping start scan Tap start scan and observe another log entry: Failed to show picker due to: The operation couldn’t be completed. (ASErrorDomain error 550.) ASErrorDomain 550: The picker can't be used because the app is in the background. Is this the expected error? 🤔 The state of the iOS permissions: The app's settings show a Bluetooth toggle normally associated with Core Bluetooth, but the app never showed a Core Bluetooth pop-up The iOS ASK app now has Core Bluetooth permission 😵‍💫 Following up with Apple This is a known bug that should be fixed in watchOS 26 when Bluetooth permissions for watch apps can be set independently of the iOS app. I've yet to test it with watchOS 26. See repo for the same post with screenshots of the settings and demo code reproducing the bug: https://github.com/superturboryan/AccessorySetupKit-CoreBluetooth-watchOS-Demo

I have filed bug reports on this to no avail, so I am bringing it up here hoping someone at Apple will address this. Since the first beta of 26.3, with voice control enabled there are now two icons in the menu bar (*plus an orange dot in full screen) that never go away. That orange microphone isn't serving its intended purpose to notify me that something is accessing my microphone if it is always displayed. I use voice control extensively, so it is nearly always on. In every prior version of macOS, the orange icon was not on for voice control. Even if voice control is not listening but simply enabled in system settings, the orange icon will be there. And there is no need for this icon to be on for a system service that is always listening. This orange icon in the menu bar at all times is incredibly irritating, as it takes up valuable space to the right of the notch, and causes other actual useful menu bar items to be hidden. As well, if some other application on my system were to turn on the mic and start recording me I would never know since that orange icon is always on. It also places an orange dot next to the control center icon taking up even more of the precious little menu bar real estate. Please fix this! Either exempt voice control (as Siri is always listening and it doesn't get the orange icon) or exempt all system services, or give me a way to turn this off. If you cannot tell, I find this incredibly annoying and frustrating.

I am new to swift development, and it's possible that I'm missing something fundamental/obvious. If so, I apologize in advance. My team is developing an application for iPadOS using SwiftUI, and I'm trying to accomplish something similar to what the original inquirer is asking for in this thread: https://developer.apple.com/forums/thread/725152. The only difference is that I'm trying to use a PIV smart card to achieve authentication to a server rather than digitally sign a document. Unfortunately, I'm getting stuck when attempting to run the list() function provided in the accepted answer to the post mentioned above. When attempting to call SecItemCopyMatching(), I'm getting a -34018 missing entitlement error. I've attempted to add the com.apple.token to my app's keychain-access-groups entitlements, but this does not resolve the issue. I have checked the entitlements in my built app, per the recommendation in the troubleshooting guide here: https://developer.apple.com/forums/thread/114456. The entitlement for com.apple.token is indeed present in the plist. Based on other documentation I've read, however, it seems that the explicit declaration of com.apple.token should not even be required in the entitlements. Is there something obvious that I'm missing here that would prevent my app from accessing the token access group?

I am trying to setup remote Java debugging between two machines running macOS (15.6 and 26). I am able to get the Java program to listen on a socket. However, I can connect to that socket only from the same machine, not from another machine on my local network. I use nc to test the connection. It reports Connection refused when trying to connect from the other machine. This issue sounds like it could be caused by the Java program lacking Local Network system permission. I am familiar with that issue arising when a program attempts to connect to a port on the local network. In that case, a dialog is displayed and System Settings can be used to grant Local Network permission to the client program. I don't know whether the same permission is required on the program that is receiving client requests. If it is, then I don't know how to grant that permission. There is no dialog, and System Settings does not provide any obvious way to grant permission to a program that I specify. Note that a Java application is a program run by the java command, not a bundled application. The java command contains a hard-wired Info.plist which, annoyingly, requests permission to use the microphone, but not Local Network access.

Hi, I have a set of plugins which are registered for login. One of them is a custom ui view for the login screen. The scenario: 1.DisableFDEAutoLogin is false. 2.The User logs in to the file vault login screen. 3.The security plugins are activated, and working. 4.We get any kind of an error from the plugins, and therefore the login fails. 5.We get a native login screen, after the denial of authorization. 6.In case that DisableFDEAutoLogin is true, I do get the custom login screen, after the file vault login. My question: Why dont I see the custom login screen, after the auto login fails? Cheers Sivan

I’m implementing a custom Authorization right with the following rule: <key>authenticate-user</key> <true/> <key>allow-root</key> <true/> <key>class</key> <string>user</string> <key>group</key> <string>admin</string> The currently logged-in user is a standard user, and I’ve created a hidden admin account, e.g. _hiddenadmin, which has UID≠0 but belongs to the admin group. From my Authorization Plug-in, I would like to programmatically satisfy this right using _hiddenadmin’s credentials, even though _hiddenadmin is not the logged-in user. My question: Is there a way to programmatically satisfy an authenticate-user right from an Authorization Plug-in using credentials of another (non-session) user?

Hi everyone, I’ve been working on storing keys and passwords in the macOS Keychain using the Keychain Services API. Specifically, I’m leveraging SecAccessControlCreateWithFlags to bind items to access control flags, and overall, it’s been working smoothly. I have a question regarding the .applicationPassword flag of SecAccessControlCreateWithFlags. While it successfully prompts the user to input a password, there are no apparent password rules, even a simple “1” is accepted. My questions are: Is there a way to enforce strong password requirements when using the .applicationPassword flag? If enforcing strong passwords isn’t possible, is there an alternative approach to provide a predefined strong password during the creation process, bypassing the need for user input? With SecAccessControlCreateWithFlags, I noticed the item isn’t stored in the traditional file-based Keychain but in an iOS-style Keychain, is there a way to store it in a file-based Keychain while marking it as unexportable? I appreciate any insights or suggestions. Thank you! Neil

We are facing an issue with Keychain sharing across our apps after our Team ID was updated. Below are the steps we have already tried and the current observations: Steps we have performed so far: After our Team ID changed, we opened and re-saved all the provisioning profiles. We created a Keychain Access Group: xxxx.net.soti.mobicontrol (net.soti.mobicontrol is one bundle id of one of the app) and added it to the entitlements of all related apps. We are saving and reading certificates using this access group only. Below is a sample code snippet we are using for the query: [genericPasswordQuery setObject:(id)kSecClassGenericPassword forKey:(id)kSecClass]; [genericPasswordQuery setObject:identifier forKey:(id)kSecAttrGeneric]; [genericPasswordQuery setObject:accessGroup forKey:(id)kSecAttrAccessGroup]; [genericPasswordQuery setObject:(id)kSecMatchLimitOne forKey:(id)kSecMatchLimit]; [genericPasswordQuery setObject:(id)kCFBooleanTrue forKey:(id)kSecReturnAttributes]; Issues we are facing: Keychain items are not being shared consistently across apps. We receive different errors at different times: Sometimes errSecDuplicateItem (-25299), even when there is no item in the Keychain. Sometimes it works in a debug build but fails in Ad Hoc / TestFlight builds. The behavior is inconsistent and unpredictable. Expectation / Clarification Needed from Apple: Are we missing any additional configuration steps after the Team ID update? Is there a known issue with Keychain Access Groups not working correctly in certain build types (Debug vs AdHoc/TestFlight)? Guidance on why we are intermittently getting -25299 and how to properly reset/re-add items in the Keychain. Any additional entitlement / provisioning profile configuration that we should double-check. Request you to please raise a support ticket with Apple Developer Technical Support including the above details, so that we can get guidance on the correct setup and resolve this issue.

Hello, I am currently working on iOS application development using Swift, targeting iOS 17 and above, and need to implement mTLS for network connections. In the registration API flow, the app generates a private key and CSR on the device, sends the CSR to the server (via the registration API), and receives back the signed client certificate (CRT) along with the intermediate/CA certificate. These certificates are then imported on the device. The challenge I am facing is pairing the received CRT with the previously generated private key in order to create a SecIdentity. Could you please suggest the correct approach to generate a SecIdentity in this scenario? If there are any sample code snippets, WWDC videos, or documentation references available, I would greatly appreciate it if you could share them. Thank you for your guidance.

We are interested in using a hardware-bound key in a launch daemon. In a previous post, Quinn explicitly told me this is not possible to use an SE keypair outside of the system context and my reading of the Apple documentation also supports that. That said, we have gotten the following key-creation and persistence flow to work, so we have some questions as to how this fits in with the above. (1) In a launch daemon (running thus as root), we do: let key = SecureEnclave.P256.Signing.PrivateKey() (2) We then use key.dataRepresentation to store a reference to the key in the system keychain as a kSecClassGenericPassword. (3) When we want to use the key, we fetch the data representation from system keychain and we "rehydrate" the key using: SecureEnclave.P256.Signing.PrivateKey(dataRepresentation: data) (4) We then use the output of the above to sign whatever we want. My questions: in the above flow, are we actually getting a hardware-bound key from the Secure Enclave or is this working because it's actually defaulting to a non-hardware-backed key? if it is an SE key, is it that the Apple documentation stating that you can only use the SE with the Data Protection Keychain in the user context is outdated (or wrong)? does the above work, but is not an approach sanctioned by Apple? Any feedback on this would be greatly appreciated.

Hi, I have a certificate, how can I display the certificate content in my Mac app just like Keychain Access app does. Can I popup the certificate content dialog just like Keychain Access app?

Hi, when creating a CryptoTokenKit extension according to https://developer.apple.com/documentation/cryptotokenkit/authenticating-users-with-a-cryptographic-token, it is neccessary to register it under the securityagent in order to make the CTK usable before login. i.e. we want to run sudo -u _securityagent /Applications/HostApp.app/Contents/MacOS/HostApp However, even with the empty application the command fails with illegal hardware instruction sudo -u _securityagent /Applications/HostApp.app/Contents/MacOS/HostApp I see that it always crashes when the HostApp is sandboxed, but it does not work even without sandboxing (i am sharing the error report message below). i actually noticed that when the HostApp is sandboxed and I run the above command, the extension starts to be usable even before login, even though i see the HostApp crash. The same does not happen without the sandbox So I am curious how to in fact properly register the CTK extension under security agent? Also am not sure how to unregister it from the _securityagent thank you for your help Version: 1.0 (1) Code Type: X86-64 (Native) Parent Process: Exited process [9395] Responsible: Terminal [399] User ID: 92 Date/Time: 2025-03-21 18:54:03.0684 +0100 OS Version: macOS 15.3.2 (24D81) Report Version: 12 Bridge OS Version: 9.3 (22P3060) Anonymous UUID: 41F9918C-5BCA-01C7-59C2-3E8CFC3F8653 Sleep/Wake UUID: 8AB66C75-3C32-41D4-9BD4-887B0FB468FE Time Awake Since Boot: 4300 seconds Time Since Wake: 1369 seconds System Integrity Protection: enabled Crashed Thread: 0 Dispatch queue: WMClientWindowManager Exception Type: EXC_BAD_INSTRUCTION (SIGILL) Exception Codes: 0x0000000000000001, 0x0000000000000000 Termination Reason: Namespace SIGNAL, Code 4 Illegal instruction: 4 Terminating Process: exc handler [9396] Application Specific Signatures: API Misuse Thread 0 Crashed:: Dispatch queue: WMClientWindowManager 0 libxpc.dylib 0x7ff80667b2bd _xpc_api_misuse + 113 1 libxpc.dylib 0x7ff80665f0e4 xpc_connection_set_target_uid + 187 2 WindowManagement 0x7ffd0b946693 -[WMClientWindowManager _createXPCConnection] + 1011 3 WindowManagement 0x7ffd0b947361 -[WMClientWindowManager _xpcConnection] + 65 4 WindowManagement 0x7ffd0b9447c9 __31-[WMClientWindowManager stages]_block_invoke + 41 5 libdispatch.dylib 0x7ff8067af7e2 _dispatch_client_callout + 8 6 libdispatch.dylib 0x7ff8067bca2c _dispatch_lane_barrier_sync_invoke_and_complete + 60 7 WindowManagement 0x7ffd0b9446fc -[WMClientWindowManager stages] + 268 8 AppKit 0x7ff80b1fd0b7 __54-[NSWMWindowCoordinator initializeStageFramesIfNeeded]_block_invoke + 30 9 libdispatch.dylib 0x7ff8067af7e2 _dispatch_client_callout + 8 10 libdispatch.dylib 0x7ff8067b0aa2 _dispatch_once_callout + 20 11 AppKit 0x7ff80b1fd060 -[NSWMWindowCoordinator initializeStageFramesIfNeeded] + 296 12 AppKit 0x7ff80a3b3701 -[NSWindow _commonInitFrame:styleMask:backing:defer:] + 888 13 AppKit 0x7ff80a3b2f77 -[NSWindow _initContent:styleMask:backing:defer:contentView:] + 1222 14 AppKit 0x7ff80a3b2aa9 -[NSWindow initWithContentRect:styleMask:backing:defer:] + 42 15 SwiftUI 0x7ff917f321e0 0x7ff91776f000 + 8139232 16 SwiftUI 0x7ff917a8e2f2 0x7ff91776f000 + 3273458 17 SwiftUI 0x7ff917bccfba 0x7ff91776f000 + 4579258 18 SwiftUI 0x7ff917f2ca8e 0x7ff91776f000 + 8116878 19 SwiftUI 0x7ff917f24a65 0x7ff91776f000 + 8084069 20 SwiftUI 0x7ff917f21540 0x7ff91776f000 + 8070464 21 SwiftUI 0x7ff91849e9f1 0x7ff91776f000 + 13826545 22 SwiftUICore 0x7ffb13103ea5 0x7ffb12c81000 + 4730533 23 SwiftUICore 0x7ffb13102e0f 0x7ffb12c81000 + 4726287 24 SwiftUI 0x7ff91849e903 0x7ff91776f000 + 13826307 25 SwiftUI 0x7ff91849bc1c 0x7ff91776f000 + 13814812 26 AppKit 0x7ff80a54f191 -[NSApplication _doOpenUntitled] + 422 27 AppKit 0x7ff80a4efc59 __58-[NSApplication(NSAppleEventHandling) _handleAEOpenEvent:]_block_invoke + 237 28 AppKit 0x7ff80a963818 __102-[NSApplication _reopenWindowsAsNecessaryIncludingRestorableState:withFullFidelity:completionHandler:]_block_invoke + 101 29 AppKit 0x7ff80a4ef6fa __97-[NSDocumentController(NSInternal) _autoreopenDocumentsIgnoringExpendable:withCompletionHandler:]_block_invoke_3 + 148 30 AppKit 0x7ff80a4eee8f -[NSDocumentController(NSInternal) _autoreopenDocumentsIgnoringExpendable:withCompletionHandler:] + 635 31 AppKit 0x7ff80a96373d -[NSApplication _reopenWindowsAsNecessaryIncludingRestorableState:withFullFidelity:completionHandler:] + 269 32 AppKit 0x7ff80a3a6259 -[NSApplication(NSAppleEventHandling) _handleAEOpenEvent:] + 529 33 AppKit 0x7ff80a3a5eb9 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 679 34 Foundation 0x7ff807a4b471 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 307 35 Foundation 0x7ff807a4b285 _NSAppleEventManagerGenericHandler + 80 36 AE 0x7ff80e0e4e95 0x7ff80e0da000 + 44693 37 AE 0x7ff80e0e4723 0x7ff80e0da000 + 42787 38 AE 0x7ff80e0de028 aeProcessAppleEvent + 409 39 HIToolbox 0x7ff81217b836 AEProcessAppleEvent + 55 40 AppKit 0x7ff80a39ee6a _DPSNextEvent + 1725 41 AppKit 0x7ff80adf38b8 -[NSApplication(NSEventRouting) _nextEventMatchingEventMask:untilDate:inMode:dequeue:] + 1290 42 AppKit 0x7ff80a38faa9 -[NSApplication run] + 610 43 AppKit 0x7ff80a362d34 NSApplicationMain + 823 44 SwiftUI 0x7ff9177a7da1 0x7ff91776f000 + 232865 45 SwiftUI 0x7ff917af0d40 0x7ff91776f000 + 3677504 46 SwiftUI 0x7ff917d8fef8 0x7ff91776f000 + 6426360 47 Crescendo CryptoTokenKit 0x10b1baf6e static HostApp.$main() + 30 48 Crescendo CryptoTokenKit 0x10b1bd2f9 main + 9 (HostApp.swift:24) 49 dyld 0x7ff8065c82cd start + 1805

For testing purposes we have code that calls SecTrustEvaluateAsyncWithError() with a trust object containing a hardcoded leaf certificate and the corresponding intermediate certificate required to form a valid chain. Because the leaf certificate has since expired we pass a date in the past via SecTrustSetVerifyDate() at wich the certificate was still valid, but trust evaluation fails: Error Domain=NSOSStatusErrorDomain Code=-67825 "“<redacted>” certificate is not standards compliant" UserInfo={NSLocalizedDescription=“<redacted>” certificate is not standards compliant, NSUnderlyingError=0x600000c282a0 {Error Domain=NSOSStatusErrorDomain Code=-67825 "Certificate 0 “<redacted>” has errors: Certificate Transparency validation required for this use;" UserInfo={NSLocalizedDescription=Certificate 0 “<redacted>” has errors: Certificate Transparency validation required for this use;}}} I know that App Transport Security enforces Certificate Transparency by default, but is there a way around that here?

Hi everyone, I’d like to clarify something regarding the behavior of Team IDs after an app transfer between Apple Developer accounts. I have an app update that enforces a force update for all users. My plan is to release this update under the current developer account, and then proceed with transferring the app to a different developer account shortly afterward. My concern is: once the transfer is complete, will users who download the same app version (released before the transfer) be logged out due to a change in Team ID? Specifically, does the transferred app continue to use the original Team ID (used to sign the last submitted build), or does the Team ID change immediately upon transfer — affecting Keychain access? Any insights or confirmation on this would be greatly appreciated. Thanks!

Our app uses Face ID to optionally secure access to the app for device owner. This not the new 'Require Face ID' feature of iOS 18 - this is our own custom implementation that has some other related logic for authentication handling. Starting in iOS 18.3.1, starting the app results in multiple Face Id checks being fired - sometimes just a couple but sometimes many more. Curiously, this is happening even when I completely disable any code we have that prompts for Face ID. It appears to come from nowhere. This does not happen on prior iOS 18 releases so, while I might be doing something improper in the code, something specific has changed in iOS 18.3.1 to cause this issue to manifest. I'm looking for advice as to what could be occurring here, how to debug a Face Id check that appears to come from nowhere, and what, if any, workarounds exist.

In some crashlog files, there are additional pieces of information related to codesigning. I can understand what most of themcorresponds to (ID, TeamID, Flags, Validation Category). But there is one I have some doubt about: Trust Level. As far as I can tell (or at least what Google and other search engines say), this is an unsigned 32 bit integer that defines the trust level with -1 being untrusted, 0, being basically an Apple executable and other potential bigger values corresponding to App Store binaries, Developer ID signature, etc. Yet, I'm not able to find a corresponding detailed documentation about this on Apple's developer website. I also had a look at the LightweightCodeRequirements "include" file and there does not seem to be such a field available. [Q] Is there any official documentation listing the different values for this trust level value and providing a clear description of what it corresponds to?

iOS18.1.1 macOS15.1.1 xcode16.1 Error Domain=com.apple.AuthenticationServices.AuthorizationError Code=1004 "Unable to verify webcredentials association of ********** with domain ******************. Please try again in a few seconds." Our domain must query with VPN, so I set webcredentials:qa.ejeokvv.com?mode=developer following: "If you use a private web server, which is unreachable from the public internet, while developing your app, enable the alternate mode feature to bypass the CDN and connect directly to your server. To do this, add a query string to your associated domains entitlement, as shown in the following example: :?mode= " but it still not working, even after I set mode=developer. Please help!!!!

Why can’t sandboxed mac app store apps have full disk access available in the system settings for full disk access? I discovered mac app store apps in release mode cannot access the ai auggie command line program and other command line programs like opengrep on your system. Debug builds fine. I came up with a workaround: Since I have an ssh client built in for connecting to remote servers, why not connect to ssh on the same local machine… Ask the user for their username and password in a popup. To do this, you have to enable remote login on your mac in system settings -> sharing. In addition you must grant full disk access to cli ssh in system settings: add /usr/libexec/sshd-keygen-wrapper It all works, but I don’t see the cli program in mac settings. To remove the cli program you must run a command line program to remove all full disk access support from all apps. No way to just undo ssh. So my question is, even though I got CodeFrog all working for a mac app store release, should I not do it because it’s insecure or too complicated with the system settings? Should I instead sell the app off the store like Panic Nova? Need some advice. I have not implemented in app purchases yet. Should I just have a reality check and sell the app off the store, or try for app store approval? Bummer… Maybe I’m ahead of my time, but perhaps Apple could review the source code for apps requesting full disk access and make sure there’s nothing fraudulent in them. Then, developer tools app store apps could be in the store with the user’s assurance that nothing is happening behind the scenes that is scary. From: https://blog.greenrobot.com/2025/11/10/i-have-a-decision-to-make/ Related post: https://developer.apple.com/forums/thread/806187 I submitted a code level tech support question for this. They directed me here.

Attempting to DECRYPT a cipher message using the Apple API SecKeyCreateDecryptedData(privateKey, .rsaEncryptionOAEPSHA256, encryptedMessage). Decryption ALWAYS fails for every algorithm. SecKeyCreateDecryptedDataWithParameters Error: `Domain=NSOSStatusErrorDomain Code=-50 "algid:encrypt:RSA:OAEP:SHA256: algorithm not supported by the key &lt;SecKeyRef:('com.yubico.Authenticator.TokenExtension:5621CDF8560D4C412030886584EC4C9E394CC376DD9738B0CCBB51924FC26EB6') 0x3007fd150&gt;" UserInfo={numberOfErrorsDeep=0, NSDescription=algid:encrypt:RSA:OAEP:SHA256: algorithm not supported by the key &lt;SecKeyRef:('com.yubico.Authenticator.TokenExtension:5621CDF8560D4C412030886584EC4C9E394CC376DD9738B0CCBB51924FC26EB6') 0x3007fd150&gt;}` Decryption failed: SecKeyCreateDecryptedData returned nil. Error: One or more parameters passed to a function were not valid. When checking with SecKeyIsAlgorithmSupported(privateKey, .decrypt, &lt;ANYalgorithm&gt;) all algorithms fail. Btw - The privateKey does support decryption when retrieving the attributes. Important to know: The private key is a reference to an external private key placed in the iOS Keychain via a 3rd party CryptoTokenKit Extension app. When I perform, the SecKeyCreateSignature(...) and pass in the SAME privateKey reference, the OS automatically calls the 3rd party app to perform a successful signing with the private key that reside on a YubiKey. Here's my code for obtaining the private key reference from an Identity: func getKeyPairFromIdentity() -&gt; (privateKey: SecKey, publicKey: SecKey)? { let query = NSDictionary( dictionary: [ kSecClass as String: kSecClassIdentity, kSecAttrTokenID as String: self.tokenID!, kSecReturnRef as String: kCFBooleanTrue as Any ] ) var identityRef: CFTypeRef? let status = SecItemCopyMatching(query, &amp;identityRef) if status == errSecSuccess, let identity = identityRef { var privateKeyRef: SecKey? let keyStatus = SecIdentityCopyPrivateKey(identity as! SecIdentity, &amp;privateKeyRef) if keyStatus == errSecSuccess, let privateKey = privateKeyRef { let publicKey = SecKeyCopyPublicKey(privateKey) if let publicKey = publicKey { print("Private and public keys extracted successfully.") return (privateKey, publicKey) } else { print("Failed to extract public key from private key.") return nil } } else { print("SecIdentityCopyPrivateKey: Private key not found error: \(keyStatus)") return nil } } else { print("SecIdentity not found or error: \(status)") return nil } }