There appears to be no method of going forward or backwards in Get Info in the Music application,

Using an iPhone Pro 12 running iOS 26.0.1, with AirPods Pro 3. Camera app does capture video with what seems to be "Studio Quality Recording". Am trying to replicate that SQR with my own Camera like app, and while I can pull audio in from the APP3 mic, and my video capture app is recording a 48,000Hz high-bitrate video, the audio still sounds non-SQR. I'm seeing bluetoothA2DP , bluetoothLE , bluetoothHFP as portType, and not sure if SQR depends on one of those? Is there sample code demonstrating a SQR capture? Nevermind video and camera, just audio even? Also, I don't understand what SQR is doing between the APP3 and the iPhone. What codec is that? What bitrate is that? If I capture video using Capture and inspect the audio stream I see mono 74.14 kbit/s MPEG-4 AAC, 48000 Hz. But I assume that's been recompressed and not really giving me any insight into the APP3 H2 transmission?

I have an iPadOS M-processor application with two different running configurations. In config1, the shared AVAudioSession is configured for .videoChat mode using the built-in microphone. The input/output nodes of the AVAudioEngine are configured with voice processing enabled. The built-in mic is formatted for 1 channel at 48KHz. In config2, the shared AVAudioSession is configured for .measurement mode using an external USB microphone. The input/output nodes of the AVAudioEngine are configured with voice processing disabled. The external mic is formatted for 2 channels at 44.1KHz I've written a configuration manager designed to safely switch between these two configurations. It works by stopping AVAudioEngine and detaching all but the input and output nodes, updating the shared audio session for the desired mic and sample-rates, and setting the appropriate state for voice processing to either true or false as required by the configuration. Finally the new audio graph is constructed by attaching appropriate nodes, connecting them, and re-starting AVAudioEngine I'm experiencing what I believe is a race-condition between switching voice processing on or off and then trying to re-build and start the new audio graph. Even though notifications, which are dumped to the console indicate that my requested input and sample-rate settings are in place, I crash when trying to start the audio engine because the sample-rate is wrong. Investigating further it looks like the switch from remote I/O to voice-processing I/O or vice-versa has not yet actually completed. I introduced a 100ms second delay and that seems to help but is obviously not a reliable way to build software that must work consistently. How can I make sure that what are apparently asynchronous configuration changes to the shared audio session and the input/output nodes have completed before I go on? I tried using route change notifications from the shared AVAudioSession but these lie. They say my preferred mic input and sample-rate setting is in place but when I dump the AVAudioEngine graph to the debugger console, I still see the wrong sample rate assigned to the input/output nodes. Also these are the wrong AU nodes. That is, VPIO is still in place when RIO should be, or vice-versa. How can I make the switch reliable without arbitrary time delays? Is my configuration manager approach appropriate (question for Apple engineers)?

We are developing an apple music app on phone, the developed web works fine on chrome, but when i load it on webivew on my phone, i can't play the first song, We doubt that the drm init, key exchange, session creation was on the music.play() function, while we trigger the play, the drm or session was not ok for play a real song, so it got an error so we may wanna know: what about the realative process of drm, key, session, etc in the play() function? are there some state detect function to show weather the drm is ok？

I’m working with the Push-to-Talk (PTT) framework and observing a consistent delay when starting audio capture. Scenario: A PTT call is already active The AVAudioSession is fully configured I request beginTransmission on the PTT channel I start my Audio Unit for recording (AudioOutputUnitStart) Observed behavior: AudioOutputUnitStart takes ~500 ms This happens whether I start the Audio Unit: after didBeginTransmission, or after AVAudioSession didActivate Comparison: Using the same Audio Unit, same format, and same configuration Without the PTT framework, AudioOutputUnitStart takes ~200 ms Additional notes: I am not modifying or reconfiguring AVAudioSession when requesting beginTransmission The audio session is already set up when the PTT call starts There are no interruptions or route changes at the time of starting the Audio Unit Impact: This extra latency is significant for Push-to-Talk use cases where fast transmit start is critical.

I'm using the new SpeechAnalyzer framework to detect certain commands and want to improve accuracy by giving context. Seems like AnalysisContext is the solution for this, but couldn't find any usage example. So I want to make sure that I'm doing it right or not. let context = AnalysisContext() context.contextualStrings = [ AnalysisContext.ContextualStringsTag("commands"): [ "set speed level", "set jump level", "increase speed", "decrease speed", ... ], AnalysisContext.ContextualStringsTag("vocabulary"): [ "speed", "jump", ... ] ] try await analyzer.setContext(context) With this implementation, it still gives outputs like "Set some speed level", "It's speed level", etc. Also, is it possible to make it expect number after those commands, in order to eliminate results like "set some speed level to" (instead of two).

After update,WeChat voice chatting no sounds, please help

{ "aps": { "content-available": 1 }, "audio_file_name": "ding.caf", "audio_url": "https://example.com/audio.mp3" } When the app is in the background or killed, it receives a remote APNs push. The data format is roughly as shown above. How can I play the MP3 audio file at the specified "audio_url"? The user does not need to interact with the device when receiving the APNs. How can I play the audio file immediately after receiving it?

Hi everyone, I’m working on an iOS MusicKit app that overlays a metronome on top of Apple Music playback. To line the clicks up perfectly I’d like access to low-level audio analysis data—ideally a waveform / spectrogram or beat grid—while the track is playing. I’ve noticed that several approved DJ apps (e.g. djay, Serato, rekordbox) can already: • Display detailed scrolling waveforms of Apple Music songs • Scratch, loop or time-stretch those tracks in real time That implies they receive decoded PCM frames or at least high-resolution analysis data from Apple Music under a special entitlement. My questions: 1. Does MusicKit (or any public framework) expose real-time audio buffers, FFT bins, or beat markers for streaming Apple Music content? 2. If not, is there an Apple program or entitlement that developers can apply for—similar to the “DJ with Apple Music” initiative—to gain that deeper access? 3. Where can I find official documentation or a point of contact for this kind of request? I’ve searched the docs and forums but only see standard MusicKit playback APIs, which don’t appear to expose raw audio for DRM-protected songs. Any guidance, links or insider tips on the proper application process would be hugely appreciated! Thanks in advance.

I have both apple devices, AirPods Pro 3 is up to date and Ultra 3 is on watch os 26.1 latest public beta. Each morning when I would go on my mindfulness app and start a meditation or listen to Apple Music on my watch and AirPods Pro 3, it will play for a few seconds then disconnects. My bluetooth settings on my watch says my AirPods is connected to my watch. I also have removed the tick about connecting automatically to iPhone on the AirPods setting in my iPhone. To fix this I invariably turn off my Apple Watch Ultra 3 and turn it on again. Then the connection becomes stable. I am not sure why I have to do this each morning. It is frustrating. I am not sure why this fix does not last long? Is there something wrong with my AirPods? Has anyone encountered this before?

using iOS 26.2; Airpods 4 Long press stem to launch Siri Speak "Record Voice Memo" -> Recording starts Recording in progress... Long press stem to launch Siri -> Nothing happens. To stop recording need use phone. is this intended behaviour? i would like to be able to stop recording with Siri I am able to launch Siri from phone while recording, but point is to keep phone in pocket and start/stop recordings only via Airpods.

Hello! We stumbled upon a problem with our karaoke app where user on iPhone 16e/iOS 18.5 has problem with mic capture, other users cannot hear him. The mic capture is working fine on 17.5, 16.8. Maybe there is something else we need when configuring AVAudioSession for iOS 18.5? Currently it's set up like this: override func viewDidLoad() { super.viewDidLoad() UIApplication.shared.isIdleTimerDisabled = true mRoomId = appDelegate.getRoomId() let audioSession = AVAudioSession.sharedInstance() try! audioSession.setCategory(.playAndRecord, mode: .voiceChat, options: [.defaultToSpeaker]) try! audioSession.setPreferredSampleRate(48000) try! audioSession.setActive(true, options: []) }

The sysEx struct in the MIDIUniversalMessage struct has a channel member but the System Exclusive (7-Bit) Message doesn't have a channel field. The System Exclusive (7-Bit) Message has a # of bytes field but the sysEx struct doesn't have a nrOfBytes, byteCount or bytesUsed member. It looks like the channel member of the sysEx struct contains the number of used bytes. Is this a mistake in the header or did I misunderstand something?

The AVB AVnu MILAN Convention has a groweing Population. Many big companies (Cisco, Meyer Sound, d&b Audio, l‘acoustics, Presonus, digico etc.) implements the AVB AVnu Milan Standards. Is there a plan on the Apple side to also implement AVnu Milan on top of the AVB Protocol? The advantage for Apple Sound would be a great Integration in the professionell Audio market and a more stable intergration on top of the AVB protocol. The atdecc work, but Not that stable.

FaceTime’s screen-share audio balance is insanely absurd right now. Whenever I share media, the system audio that gets sent through FaceTime is a tiny whisper even at full volume (or even when connected to my speaker or headphones). The moment anyone on the call makes any noise at all, the shared audio ducks so hard it disappears, while the voice (or rustling or air conditioning noise) spikes to painful levels. It’s impossible to watch or listen to anything together. Also, the feature where FaceTime would shrink to a square during screen-sharing has been completely removed. That was a good feature and I'm really confused why it's gone. Now, the FaceTime window stays as a long rectangle that covers part of the content I'm trying to share (unless I do full screen tile, but then I can't pull up any other windows during the call) and can't be made smaller than about a third of the screen. You can't resize the window or adjust its dimensions, so it ends up blocking the actual media you're trying to watch. Here are some feature requests/fixes that would greatly improve the FaceTime screen-share experience: Option to adjust the shared media volume independently of call audio. Disable/toggle the extreme automatic audio docking while screen-sharing Reintroduce the minimized “floating square” mode or allow full manual resizing and repositioning of the FaceTime window during screen-share sessions. Overall, this setup makes FaceTime screen-sharing basically unusable. The audio balance is so inconsistent that it’s easier to switch to Zoom or Google Meet, which both handle shared sound correctly and let you move the call window out of the way. Until these issues are fixed, there’s no practical reason to use FaceTime for shared viewing at all.

iPhoneやiPadにおいて、画面上のボタンなどをタップした際に、特定の楽器音を発音させる方法をご存知の方いらっしゃいませんか？ 現在音楽学習アプリを作成途中で、画面上の鍵盤や指板のボタン状のframeに、単音又は和音を割当て発音させる事を考えております SwiftUIのcodeのみで実現できないでしょうか 嘗て、MIDIのlevel1の楽器の発音機能があった様に記憶していますが、現在のOS上では同様の機能を実装してないように思えます 皆様のお知恵をお貸しください

Is there any feasible way to get a Core Audio device's system effect status (Voice Isolation, Wide Spectrum)? AVCaptureDevice provides convenience properties for system effects for video devices. I need to get this status for Core Audio input devices.

Hi all, I've developed an audio DSP application in C++ using AudioToolbox and CoreAudio on MacOS 14.4.1 with Xcode 15. I use an AudioQueue for input and another for output. This works great. I'm now adding real-time audio analysis eg spectral analysis. I want this to run independently of my audio processing so it can not interfere with audio playback. Taps on AudioQueues seem to be a good way of doing this... Since the analytics won't modify the audio data, I am using a Siphon Tap by setting the AudioQueueProcessingTapFlags to kAudioQueueProcessingTap_PreEffects | kAudioQueueProcessingTap_Siphon; This works fine on my output queue. However, on my input queue the Tap callback is called once and then a EXC_BAD_ACCESS occurs - screen shot below. NB: I believe that a callback should only call AudioQueueProcessingTapGetSourceAudio when not using a Siphon, so I don't call it. Relevant code: AudioQueueProcessingTapCallback tap_callback) { // Makes an audio tap for a queue void * tap_data_ptr = NULL; AudioQueueProcessingTapFlags tap_flags = kAudioQueueProcessingTap_PostEffects | kAudioQueueProcessingTap_Siphon; uint32_t max_frames = 0; AudioStreamBasicDescription asbd; AudioQueueProcessingTapRef tap_ref; OSStatus status = AudioQueueProcessingTapNew(queue_ref, tap_callback, tap_data_ptr, tap_flags, &max_frames, &asbd, &tap_ref); if (status != noErr) printf("Error while making Tap\n"); else printf("Successfully made tap\n"); } void tapper(void * tap_data, AudioQueueProcessingTapRef tap_ref, uint32_t number_of_frames_in, AudioTimeStamp * ts_ptr, AudioQueueProcessingTapFlags * tap_flags_ptr, uint32_t * number_of_frames_out_ptr, AudioBufferList * buf_list) { // Callback function for audio queue tap printf("Tap callback"); }``` Image of exception stack provided by Xcode: ![]("https://developer.apple.com/forums/content/attachment/27479e8d-a118-459b-aa2d-7e30528910e3" "title=Screenshot 2025-06-14 at 1.29.14 PM.png;width=932;height=562") What have I missed? Appreciate any help you learned folks may be able to provide. Best, Geoff.

I'm working in Swift/SwiftUI, running XCode 16.3 on macOS 15.4 and I've seen this when running in the iOS simulator and in a macOS app run from XCode. I've also seen this behaviour with 3 different audio files. Nothing in the documentation says that the speechRecognitionMetadata property on an SFSpeechRecognitionResult will be nil until isFinal, but that's the behaviour I'm seeing. I've stripped my class down to the following: private var isAuthed = false // I call this in a .task {} in my SwiftUI View public func requestSpeechRecognizerPermission() { SFSpeechRecognizer.requestAuthorization { authStatus in Task { self.isAuthed = authStatus == .authorized } } } public func transcribe(from url: URL) { guard isAuthed else { return } let locale = Locale(identifier: "en-US") let recognizer = SFSpeechRecognizer(locale: locale) let recognitionRequest = SFSpeechURLRecognitionRequest(url: url) // the behaviour occurs whether I set this to true or not, I recently set // it to true to see if it made a difference recognizer?.supportsOnDeviceRecognition = true recognitionRequest.shouldReportPartialResults = true recognitionRequest.addsPunctuation = true recognizer?.recognitionTask(with: recognitionRequest) { (result, error) in guard result != nil else { return } if result!.isFinal { //speechRecognitionMetadata is not nil } else { //speechRecognitionMetadata is nil } } } } Further, and this isn't documented either, the SFTranscriptionSegment values don't have correct timestamp and duration values until isFinal. The values aren't all zero, but they don't align with the timing in the audio and they change to accurate values when isFinal is true. The transcription otherwise "works", in that I get transcription text before isFinal and if I wait for isFinal the segments are correct and speechRecognitionMetadata is filled with values. The context here is I'm trying to generate a transcription that I can then highlight the spoken sections of as audio plays and I'm thinking I must be just trying to use the Speech framework in a way it does not work. I got my concept working if I pre-process the audio (i.e. run it through until isFinal and save the results I need to json), but being able to do even a rougher version of it 'on the fly' - which requires segments to have the right timestamp/duration before isFinal - is perhaps impossible?

I have a question regarding the behavior of AVAudioSession.sharedInstance().outputVolume. Observed behavior: When the app is in the foreground, I read audioSession.outputVolume (for example, 0.1). The app is then moved to the background. While the app is in the background, the user changes the system volume using the hardware buttons (for example, to 0.5). When the app returns to the foreground, audioSession.outputVolume still reports the previous value (0.1). From my testing, outputVolume only seems to update when the system volume is changed while the app is in the foreground. Volume changes made while the app is in the background are not reflected when the app returns to the foreground. Questions: According to Apple’s documentation for AVAudioSession.outputVolume: “The systemwide output volume set by the user.” https://developer.apple.com/documentation/avfaudio/avaudiosession/outputvolume However, based on our testing on iOS 18.6.2 and iOS 18.1, the observed behavior seems to differ from this description. Questions: The documentation states that outputVolume represents the system-wide volume set by the user. In our testing, the value does not reflect volume changes made while the app is in the background and only updates when the app is in the foreground.Is this the expected behavior of AVAudioSession.outputVolume? Is there any other recommended way in Swift to retrieve the current system volume that reflects user changes made both while the app is in the foreground and while it is in the background? Any clarification on the intended behavior or recommended handling would be greatly appreciated.