When I open the "devices and simulators" window now I only see "No selection" in the center. No sidebar pane, and no detail pane. I was able to set up some simulators up to last week or so, and now this. I've no idea how to create a new simulator or inspect the ones I have.

I have a project that uses local SPM packages for modularization. In one of my local SPM packages I have a .storyboard file that gets packaged as a resource in the SPM package and consumed inside the parent. In Xcode 15.4, the resource bundle for my local SPM Package has the bundle id PackageName-TargetName-resources. I use this inside a parent storyboard to reference the storyboard from the SPM package. In Xcode 16, however, the resource bundle for my SPM Package gets assigned the bundle id packagename.TargetName.resources. This, of courses, introduces a crash in builds of my app done with Xcode 16 due to the incorrect bundle id. There is no documentation of this change that I could find by Apple or by the SPM team. Apple Team: There is a Feedback Report FB14803020 with the build files attached from Xcode 15.4 and Xcode 16. I cannot attach those here due to the public nature of this forum

I came across several "errors" being reported when I run my app, however my app seems to function correctly. I believe they fall in the category listed on this ( now locked ) thread https://developer.apple.com/forums/thread/115461 However, I wanted to post the ones I found to clarify ( close to submission) just in case any of these end up being more than just log noise later. PLEASE let me know if you've come across these before and whether they impacted anything or if you can confirm they are just log noise. Thanks in advance! -[RTIInputSystemClient remoteTextInputSessionWithID:performInputOperation:] perform input operation requires a valid sessionID. inputModality = Keyboard, inputOperation = , customInfoType = UIEmojiSearchOperations AVAudioSession_iOS.mm:2,223 Server returned an error from destroySession:. Error Domain=NSCocoaErrorDomain Code=4099 “The connection to service with pid 102 named com.apple.audio.AudioSession was invalidated from this process.” UserInfo={NSDebugDescription=The connection to service with pid 102 named com.apple.audio.AudioSession was invalidated from this process. CAReportingClient.mm:532 Attempted to remove a reporter not created by this client { careporter_id=408,331,130,765,320 } load_eligibility_plist: Failed to open //private/var/db/os_eligibility/eligibility.plist: Operation not permitted(1) - I verified and this file is indeed in non read mode on my Mac for the user. However it affects nothing. The following 2 pop up - although I have no explicit code or 3P code ( nor Ads) that require impressions - each time I click on the Game Center Access Point post authentication. Cannot add impressions because no tracker is specified by the metrics fields context. Did you forget to set one from your view controller or data source? Cannot add page fields because none are specified by the metrics fields context. Did you forget to add an PageMetricsPresenter to the object graph used for actions?

Hello, I'm unable to run any test cases in Xcode 16 with the iOS 18 simulator. Steps to Reproduce: Create a new iOS project in Xcode 16 using the default iOS app template with the testing option checked. Run any test or UI test case by clicking the "Play" icon in the Test navigator. Xcode gets stuck at the "Testing" state indefinitely. Environment: macOS 15 beta 8 Xcode 16 beta 6 iOS 18 beta 7 simulator

The Files app in the iOS 18 beta simulator appears to be read-only. I am unable to: create folders copy files into it by dragging them from macOS safe files from safari I have been unsuccessful at finding a way to popular any file or folder in the Files app which is preventing me from testing some scenarios in my app where I import files using the files sheet. The earliest I tried was beta 3 and it still persists in beta 7. The iOS 17 simulator works fine in comparison. My mac is a 2019 macbook pro running Sonoma 14.5. To reproduce: New folder Launch Files app in iOS simulator Tap into "On my phone" From the top menu tap "New Folder" (nothing happens) Download a file Launch safari Find a file like a PDF to download Tap on the down arrow in the toolbar Files opens up with the filename in the textfield at the bottom The "Save" button is grayed out. Copy from macOS Open the Files app in iOS and browse to a local folder drag a file from the macbook onto the simulator the sheet appears with the filename in the text field The "Save" button is grayed out

On iOS 18.0+ simulators, tap any share link button from any app, select "Save to Files", the "Save" button is disabled. In all previous simulator versions this works. This behavior even happens with default Apple apps like Photos. Simulator: Version 16.0 (1037) XCode: Version 16.1 beta (16B5001e) macOS: 14.6.1 (23G93)

I have some formatting strings that got in my string catalog, e.g. "%@" or "(%@)". However these strings are no longer used in my code anywhere (searching "In this project" in Xcode only matches the entries in my strings catalog), but Xcode does not remove them. I tried editing the file in a text editor, removing them manually but they keep coming back. Any solution for this? Xcode Version 15.4 (15F31d)

Issue: unresolvable because: Could not complete create template: empty template: Failed # variables.0.definitions.0.synomyms.0 I have no idea what this means.

I am using GoogleMobileAds package dependencies and now when I want to archive and export an app I get this two warnings : Upload Symbols Failed The archive did not include a dSYM for the GoogleMobileAds.framework with the UUIDs [13B55A37-D103-36E1-8D7B-FA4EAB2C8146]. Ensure that the archive's dSYM folder includes a DWARF file for GoogleMobileAds.framework with the expected UUIDs. Upload Symbols Failed The archive did not include a dSYM for the UserMessagingPlatform.framework with the UUIDs [A3941120-02A1-30B5-8C28-BFC0F9496E16]. Ensure that the archive's dSYM folder includes a DWARF file for UserMessagingPlatform.framework with the expected UUIDs. I have updated the packages to 11.9.0 (lasted) and Xcode 16 to 16 RC (lasted also) and I would like to know how to fix this... With Xcode 15 I have no problem !! I can export with no warnings ! But now with Xcode 16 no... Thanks for helping !

I have installed Sequoia and Xcode 16 and now I can't add packages to my (or any project). I just get a message saying the package can't be resolved. Basically I can't carry on developing. SORT THIS OUT APPLE

I've updated my computer to Sequoia 15, Xcode 16 and now no matter what I do, I am unable to work with Swift UI previews. I get this error each time I try to run the preview: Failed to launch app in reasonable time I have done: Uninstall/Re-install Xcode Deleted derived data Deleted the simulator data Used DevCleaner to remove all data related to Xcode Searched all websites about this issue. ( Non shown a good solution ) Write this question on here. If anyone has found a solution, please let me know how you fixed it.

Comments are not displayed correctly in Xcode 16. As you can see on the included screenshot, the first /// are displayed correctly but the remaining ////////////////////////// are super small. In a programming text editor, like Xcode, all characters MUST be monospaced. Otherwise it is impossible to code. Xcode is not supposed to be a word processor. There are no parameters to fix that. It was working fine for the past 15 years on Xcode. Please fix that so I can work again. And never do that ever again. Understood?

Hi, I recently updated to Xcode 16. Since then I successfully built my app and sent an update to the App Store. But suddenly, after an exception I've experienced while working on my code, the app is crashing on launch, without showing the stack trace, and showing only one warning in the console: warning: (arm64) /Users/myuser/Library/Developer/Xcode/DerivedData/myapp-bglvscamatwthwbfqmtzmbvxeewc/Build/Products/Debug-iphonesimulator/myapp.app/MyApp empty dSYM file detected, dSYM was created with an executable with no debug info. Tried deleting derived data Erasing all simulator data Reseting my computer No change yet. Any idea what am I missing? Thank you..

Hello. In the Xcode 15 we were using this command in the terminal to run our tests on the Rosetta Simulator: xcodebuild -workspace CoreLibraries.xcworkspace -scheme CoreLibraries -destination 'platform=iOS Simulator,name=iPhone 15,arch=x86_64' test` In the Xcode 16 the same command doesn't work anymore. It produces the error: xcodebuild: error: Unable to find a device matching the provided destination specifier: { platform:iOS Simulator, arch:x86_64, OS:latest, name:iPhone 16 } Unsupported device specifier option. The device “iPhone 16” does not support the following options: arch Please supply only supported device specifier options. Running test directly from the Xcode UI using iPhone 16 (Rosetta) still works fine. Does anyone know how to modify the xcodebuild command to make it work again?

There is a significant regression in Xcode 16.0 and 16.1 (16B5014f) in that it no longer allows asset files other than .SCN files to be added to a .scnasset group and folder. This really wrecks our ability to maintain our app since we heavily depend on additional assets like .USDZ, .JPEG, .PNG, etc. files to be able to be included in the group for on-demand resource tagging and loading. I filed FB15239224 but I'm wondering if this is intentional and if anyone knows of a workaround.

I am using the latest version of Xcode 16, and I have created a GPX file in my project. However, I am unable to see or select the file to simulate the GPS location. I have attempted to uninstall and reinstall Xcode completely, but the issue persists. Has anyone encountered a similar problem? How can I resolve this? Thank you.

I installed xcode 16 and both Predictive Code Completion Model and iOS 18.0 Simulator Failed Download. I can live without the code completion, but I can not get any Simulator to install. I clicked of the info button and it shows the following: Download failed. Domain: DVTDownloadableErrorDomain Code: 41 User Info: { DVTErrorCreationDateKey = "2024-09-30 15:57:24 +0000"; } Download failed. Domain: DVTDownloadableErrorDomain Code: 41 Failed fetching catalog for assetType (com.apple.MobileAsset.iOSSimulatorRuntime), serverParameters ({ RequestedBuild = 22A3351; }) Domain: DVTDownloadsUtilitiesErrorDomain Code: -1 Download failed as the server said authentication failed. (Catalog download for com.apple.MobileAsset.iOSSimulatorRuntime) Domain: com.apple.MobileAssetError.Download Code: 41 User Info: { checkServer = 1; } System Information macOS Version 15.0 (Build 24A335) Xcode 16.0 (23051) (Build 16A242d) Timestamp: 2024-09-30T10:57:24-05:00

I’ve developed an Apple Watch extension for an existing iOS app. When I run the app on the watch via Xcode using the simulator, everything works fine. However, when I try to install it on my iPhone, the Watch app doesn’t show it in the "Available Apps" list, so I can't install it on the watch. The Apple Watch is connected to my iPhone, and I can see other apps available for installation without any issues. I also created a brand new project with watchOS support to troubleshoot, but the same problem occurred. Any ideas on how to resolve this?

I’ve noticed a strange bug in Xcode 16 and Swift. When a preview is rendering and hasn’t finished yet and you run an app to debug, Xcode is launching two instances of the app. Has anyone else noticed this issue? If you let the preview finish rendering before running the app, this doesn’t happen. Very odd.

Hi, i have met error below when i tried to po one attributes of an instance in my Xcode lldb: error: type for self cannot be reconstructed: type for typename "$xxxxx" was not found (cached) error: Couldn't realize Swift AST type of self. Hint: using `v` to directly inspect variables and fields may still work. Is there anybody met the same error before? I urgently want to know why this happen and how to fix this issue. My macOS Version is Sequoia v15.0.1, Xcode16.0. This problem showed after i upgraded my macOS and Xcode version.