Hi!!! I can't publish the app as I have a paid membership through Stripe. I have a wordpress site and have a paid membership to access the content... The app is geared by a third party service and I can't put any code into it... What can I do? There is an idea that in the application to display a link to the site where to place the payment for membership... Please advise, I'm not the first to face this....

Frequently, when transferring large files using AirDrop, it will suddenly fail mid-transfer. Looking into the macOS logs reveals the fault: error 19:45:25.701432-0700 sharingd SDAirDropFileZipper: bomCopierFatalErrorPtr - cpio read error: bad file format error 19:45:25.701517-0700 sharingd SDAirDropCompressor: CFWriteStreamWrite returned -1 default 19:45:25.701533-0700 sharingd Zipper Update: Error Domain=NSPOSIXErrorDomain Code=5 "Input/output error" UserInfo={NSLocalizedDescription=cpio read error: bad file format} default 19:45:25.706094-0700 sharingd Closing output stream default 19:45:25.707901-0700 sharingd Invalidating XPC helper for macOS downloads directory error 19:45:25.708039-0700 sharingd Decompression failed Error Domain=NSPOSIXErrorDomain Code=5 "Input/output error" UserInfo={NSLocalizedDescription=cpio read error: bad file format}

Issue with Heart Rate Graph from Apple Watch in iOS App Hello Community! I hope everyone is doing well. I'm developing an iOS app that includes a feature to display a graph of the heart rate recorded during a route using the Apple Watch. Current Implementation I have successfully implemented data collection and transfer from the Apple Watch to the iPhone. The app's main UI correctly displays the user's real-time BPM. When the user stops the route, an analysis view is generated, showing speed and altitude (both work perfectly). Expected Behavior The user starts recording a route while monitoring heart rate. After tapping "Stop Route," an analysis view should display a heart rate graph along with speed and altitude data. Issue Encountered Despite multiple attempts, I have not been able to properly generate the heart rate graph. The only result I have achieved so far is a flat line with points representing the recorded BPM over time, instead of a proper graph. Request for Help If anyone has experience implementing a similar feature, I would appreciate any guidance on correcting my implementation. I can share: The file responsible for graph visualization. The file handling data processing after the user stops the route. Any help or suggestions would be greatly appreciated! Summary I'm trying to display a heart rate graph from Apple Watch data in my iOS app. While data collection and transfer work fine, the graph only shows a flat line instead of a proper visualization. Speed and altitude graphs work correctly. If anyone has experience with this, I’d love some guidance!

Hi Everybody knows about how this kind of files works. My issue is about trying to load data from these files to a HTML page. Everything works, I can read and use this data on my project however the records I have in Numbers, text where there are commas for punctuation, will be separated when this file is loaded. The comma is breaking the records, I know this is a CSV file but is there a way to set semicolon as delimiter on Mac or Numbers to be able to use the comma in my records without any issue? Also could be another symbol, but definitely I need the commas. thank you!

Hi, I'm trying to figure out how to edit the bootps.plist which is in the system / library directory. I have an M4 MacBook running OS 15.3.2 and I've held down the power button to go into recovery mode, and in terminal entered the 'csrutil disable' command and have restarted but when I go back to 'get info - Sharing & Permissions' I can't change any of the permissions. I need to be able to edit this file to create DHCP server. How can I change edit permissions on the bootps.plist?

Hello all, We are in the process of deploying EAP-TLS Wi-Fi authentication across our corporate environment for both Windows and macOS devices. All endpoints are managed via Workspace ONE. As part of our macOS configuration, we are pushing device certificates to the login keychain of managed MacBooks. For testing purposes, we have explicitly set the Access Control List (ACL) of the associated private key to allow all applications access. This includes: eapolclient, which handles the EAP-TLS handshake for Wi-Fi panGPS, which is responsible for establishing the GlobalProtect VPN connection (we are using certificate-based authentication with pre-logon enabled) Additionally, we have configured and deployed a Wi-Fi profile via Workspace ONE to prevent users from having to manually select their device certificate - basically the identity preference card in Keychain Access. Despite these settings, we are still encountering Keychain Access prompts when eapolclient attempts to access the private key. This happens even though the key is configured to allow all applications access. This behavior is unexpected, and we’re trying to understand why these prompts persist. Has anyone encountered similar behavior on macOS, or is there something we're missing in terms of permissions or keychain configuration that could be causing this? We would greatly appreciate any insight or guidance. Thank you, Kyo

My mail app keeps crashing? Can Anyone help? I'm using Mac OS Ventura 13.7.5 - updated yesterday and having this issue ever since: Translated Report (Full Report Below) Process: Mail [924] Path: /System/Applications/Mail.app/Contents/MacOS/Mail Identifier: com.apple.mail Version: 16.0 (3731.700.6.1.10) Build Info: Mail_App-3731700006001010~2 Code Type: X86-64 (Native) Parent Process: launchd [1] User ID: 502 Date/Time: 2025-03-31 23:17:55.8952 +0100 OS Version: macOS 13.7.5 (22H527) Report Version: 12 Anonymous UUID: 2B9E5AC3-9B82-567C-8B10-A0555BEEE9BC Time Awake Since Boot: 990 seconds System Integrity Protection: enabled Crashed Thread: 3 Dispatch queue: MCTaskHandler queue (QOS: BACKGROUND) Exception Type: EXC_CRASH (SIGABRT) Exception Codes: 0x0000000000000000, 0x0000000000000000 Termination Reason: Namespace SIGNAL, Code 6 Abort trap: 6 Terminating Process: Mail [924] Application Specific Information: abort() called

Back in December 2024 I noticed when I go through the steps to print I would get an error to cancel or retry. We have 4 iPhones and 3 had the newest IOS and those 3 would get the same error. The phone that had old ios 17 something the print would work. Called Apple and did troubleshooting, the opened something on apples end for the developer to investigate. Within 2 weeks a new ios was available and fixed the issue on the 3 phones that could not print. I did the latest update February and March 2025 on all 4 phones thinking no way the issue will happen again and if did all 4 phone cannot print. Is there an iOS bug that is affecting printing ios 18.3.2.

I am using HelloPhotogrammetry in Xcode I can make one model with something like HelloPhotogrammetry.main([path_to_folder_of images, path_to_output/model.usdz, "-d", "medium", "-o", "unordered", "-f", "high" ]) But how would I request several models simultaneously? I only want to vary the detail. [ ("/Users/you/Desktop/model_medium.usdz", detail: .medium), ("/Users/you/Desktop/model_full.usdz", detail: .full), ("/Users/you/Desktop/model_raw.usdz", detail: .raw ]

How long was it between putting your first app on the App Store (that had a paid component to it like IAPs) and getting your first sale? I'm working on an app at the moment that I plan on putting up for a small one time fee. I'm curious to know what people's different experiences were with this. What was your app and how did it go?

i am using this code public static bool CheckForForceUpdate() { try { Version latestVersion = new(GetLatestVersion()); Version currentVersion = new(AppInfo.VersionString); if (latestVersion != null && currentVersion < latestVersion) { NSUserDefaults.StandardUserDefaults.SetBool(true, StorageKey.IsForceUpdate); return true; } else { NSUserDefaults.StandardUserDefaults.SetBool(false, StorageKey.IsForceUpdate); return false; } } catch (Exception ex) { Console.WriteLine("CheckForForceUpdate....." + ex.Message); return false; } } public static string GetLatestVersion() { try { string appId = "1586153397"; // Replace with your App Store app ID string url = $"https://itunes.apple.com/lookup?id={appId}"; using (HttpClient client = new HttpClient()) { var response = client.GetStringAsync(url).GetAwaiter().GetResult(); var json = JObject.Parse(response); var latestVersion = json["results"]?[0]?["version"]?.ToString(); return latestVersion; } } catch (Exception ex) { Console.WriteLine("GetLatestVersion..." + ex.Message); return null; } } The value of latestVersion should 2.1 in my production app i am not able to get this hence i am not able to achieve Force Update functionality

Hi everyone, We’re seeing a rare but frustrating issue in our iOS VoIP app and would appreciate any advice. What’s happening: In some VoIP calls between two users (let’s say A and B), B can’t hear A’s voice, but A can still hear B just fine. It doesn’t happen often, but once it does, the issue persists until the device is restarted. Users who experience this issue typically have other voice or conferencing apps installed and actively use them. They report that when our app runs into this problem, those other apps continue to work normally. ⸻ What we’ve ruled out: • AVAudioSession has microphone permission, and audio input works under normal conditions • Network conditions are stable • App-side logic seems solid — the issue occurs extremely rarely (e.g., 1 out of several thousand calls), making it unlikely to be caused by a consistent bug in our call flow ⸻ What we’ve tried to fix it (all ineffective): Restarting the call — no effect Force-quitting and relaunching the app — no effect Toggling Bluetooth: disconnecting and reconnecting audio route, or switching back to built-in mic — no effect Replugging wired headphones or switching to the default iPhone audio input — no effect ⸻ What actually works (so far): • Restarting the device — this is the only action that reliably fixes the issue ⸻ What we’re looking for help with: 1. Does this sound like an iOS-level AVAudioSession routing or audio stack issue? 2. Is there any way to recover from this state without rebooting the device — either through iOS system settings or programmatically? 3. Are there any known audio routing or input bugs in iOS that match this behavior? Thanks in advance — any suggestions or pointers would be greatly appreciated!

Installed the iOS 26 Beta on my iPhone 13 Pro last night, hated it. I wasn't aware that there is a supported way of restoring back to iOS18.5, so I (foolishly) opted to flash the iOS18.5 ispw file onto my device using a 3rd party tool. Now, my device is stuck in a state between. Unable to flash, unable to use itunes to restore, randomly gives error codes during restoration attempts. Worries my device may be lost permanently! Please advise.

Hi, Visual Intelligence doesn't work for my screenshot. Does anyone know why? I'm in Greece, maybe it's the region, or something to set up? Thanks

Hello Apple Developers, I am experiencing an issue where USB audio input (e.g., external USB microphone) is blocked when using AirPlay screen mirroring from my iPhone to a Mac or Apple TV. However, the built-in microphone continues to work without any problem. Issue Details: I am using an iPhone 15 (or latest device) running iOS [your iOS version]. I connect a USB audio interface/microphone via a USB-C adapter or Lightning adapter. The USB microphone works perfectly for audio input before starting AirPlay. The moment I enable AirPlay screen mirroring, the USB microphone stops working, and it disappears from available audio input sources. The built-in microphone continues to function, but I cannot use the USB microphone while mirroring. When I stop screen mirroring, the USB microphone immediately becomes available again. Expected Behavior: I would expect iOS to allow me to continue using an external USB microphone while mirroring my screen, just like it allows the built-in microphone to work. Questions: Is this an intentional restriction in iOS? Is there any workaround to enable USB audio input while using AirPlay screen mirroring? Is there a way to request a feature or configuration option to allow external USB microphones during AirPlay? I appreciate any insights or guidance from the Apple team or fellow developers. Thanks in advance! Best regards,

After updating my carrier name changed to 410 04 name is not displaying just this code is showing

For 9 Glorious Months, My MacBook Pro &amp; J5 Create JCD543 HUB Were Best Friends… Until I Updated macOS For nearly a year, my MacBook Pro 14” (2023, M2 Pro, 16GB RAM) worked flawlessly with my J5 Create JCD543 HUB, allowing me to run: ✅ 4 External Displays (Samsung, LG, Insignia, Samsung) A setup that worked perfectly… until I updated macOS. Then Came the Update… and the Issues Began First, I updated last week. Two of my four displays stopped working. No big deal, I thought—I’ve dealt with display quirks before. Then, like an optimist ignoring red flags, I updated again last night to 15.4 Beta (24E5222f) and… well, now things are completely broken. My Once-Perfect Setup (Now a Display Disaster) JCD543 HUB → 2 HDMI displays (not working) JUD380 HUB → 1 HDMI display (partially working, unstable) MacBook HDMI port → 1 HDMI display (working, but feeling abandoned) JCA365 USB-C to Dual HDMI Adapter (Not part of my setup, but tested—also not working) What I’ve Tried (aka My Troubleshooting Journey) ✔ Restarted my Mac multiple times ✔ Uninstalled and reinstalled J5 drivers ✔ Swapped cables, unplugged/replugged everything, tested known-working HDMI cables (they work fine on other devices) ✔ Deleted /Library/Preferences/com.apple.windowserver.displays.plist (this fixed a similar issue in the past, but the file no longer exists in this update) The Likely Culprit? It seems to be a J5 driver issue triggered by the macOS update—and I’m not alone. Others are reporting similar problems. Apple… Any Fixes? I just want my four screens back. The setup worked flawlessly for 9 months, so it’s hard to believe it was never meant to work. If anyone has a workaround, I’m open to testing any solution—whether it’s a driver update, system tweak, or hidden macOS setting that might bring my displays back to life. Any advice would be greatly appreciated! Thanks in advance. (P.S. Apple, if you’re reading this—please look into this issue!)

Hi everyone, We're hoping someone here can help us out. We've run into a consistent issue when trying to enroll a new Apple Developer account as an organisation using our DUNS number. Here's what we've experienced: Individual enrollment through the Developer app works perfectly with a new Apple ID. However, when using an existing Apple ID and selecting organization enrollment, the process gets stuck: The payment button is greyed out in the Developer app. We're then locked out of enrolling through the app entirely. 4. When trying to complete the enrollment via the Developer website, there’s no valid payment method available (e.g., VISA option missing CVV field), and any attempts to proceed just loop without success. We're essentially stuck in a limbo state where we can’t proceed. We’ve gone through all the support channels: The automated assistant (Gaby) is unable to resolve the issue or understand the full context. Live chat support for both individual and business accounts told us they can’t assist and referred us back to the developer support system—which leads us back to square one. All members of our team were able to enroll individually without issue, but organisation enrollment consistently failed. Business support and Commercial support (spoken to supervisors) are unable to assist. They really tried and made an effort. Has anyone experienced this before? Is there a way to get in touch with a real person at Apple who can actually resolve this? What are our next steps? Any advice would be greatly appreciated. Thanks!

HELP THANKS , ANY ONE KOWN WHY PAY AND PASS TWO WEEKS, STILL IN PEDDING?

I'm building a Live Activity using ActivityKit in iOS, and I'm trying to understand how apps like Uber or Lyft manage to keep the Dynamic Island always in its expanded state, without transitioning through the compact phase. In my implementation, the Live Activity always starts in the compact state, and only expands temporarily when I interact with it. I've tried the following: Updating the ContentState frequently using activity.update(using:) I tried updating the activity every 1 second, but it didn’t make a difference. Leaving the compactLeading, compactTrailing, and minimal regions empty using EmptyView() — also didn’t change the behavior. Delaying the initial update by 1 second — no effect. What I'm trying to figure out: Is there any way to programmatically force or request the Dynamic Island to stay in the expanded state? Could this behavior be achieved through push updates, using apns-push-type: liveactivity and a high priority (apns-priority)? What I’m trying to achieve is similar to the behavior shown in the images below — the apps do not transition to the compact island, but instead displays the expanded view immediately. Example: