Hi Apple team and community, We’re currently integrating with the Apps and Books for Organizations API as part of our device management solution and would like to highlight a few critical points we've encountered — including a reliability issue, an enhancement suggestion, and a request for clarification on API rate limits. 1. Issue: Intermittent 403 Errors with stoken-authenticated-apps Endpoint We are encountering intermittent 403 Forbidden responses from the stoken-authenticated-apps endpoint. Approximately 30–35% of the requests fail with a 403 status code. These failures are inconsistent — the same request (using the same Content Token and Storefront) may succeed upon retry. All requests are properly authenticated and include the required Cookie and other headers as specified in the API documentation. This issue is impacting our ability to reliably fetch app metadata at scale, particularly in workflows. We’d like to know: Is this a known issue? Could it be due to a rate limit or token misconfiguration? Are any changes required on our end to avoid these failures? 2. Enhancement Request: Include externalVersionId in versionHistory Response The versionHistory extension currently returns: versionString releaseNotes releaseDate However, for Declarative Device Management (DDM) workflows such as App Pinning, we need the externalVersionId as well. Without it, we can't reliably correlate version metadata with the specific version ID required for pinning. Adding externalVersionId would: Enable precise version targeting during App Pinning Improve reliability and automation in managed deployments We request that Apple consider including externalVersionId in the versionHistory response to better support DDM-based app lifecycle management. 3. Rate Limit Clarification We found the following note in the Apps and Books for Organizations API documentation: "The Apps and Books for Organizations API limits the number of requests your app can make using a developer token within a specific period of time. If you exceed this limit, you’ll temporarily receive 429 Too Many Requests error responses for requests that use the token. This error resolves itself shortly after the request rate has reduced." While this confirms that a rate limit is enforced, there is no detailed information about the thresholds — such as the number of allowed requests per minute, hour, or day per developer token. To help us implement proper throttling and retry strategies, we request clarification on the following: What is the exact rate limit threshold per developer token? Are there per-endpoint limits, or is it a global cap for all requests using the token? Does the API return a Retry-After header when the limit is exceeded? What is the recommended backoff strategy for clients to follow when receiving 429 errors? This information would help us implement efficient throttling and error handling logic. Any insights from the Apple team or other developers who’ve encountered these issues would be greatly appreciated!

Hi everyone, I want to enable Single App Mode (SAM) for my custom app that’s installed on the device. However, my device is not supervised. Is there any way to: Enable Single App Mode without supervising the device? Any guidance or workaround would be appreciated. Thanks, Arnab Lahiri

It seems like there are some "mixed messages" out there about what should be in OID 1.2.840.113635.100.8.11.1 in the attestation cert. Is it just a SHA256 hash of the nonce issued by the ACME server? The MDM profile yaml says: "In the attestation certificate the value of the freshness code OID matches the nonce specified by the ACME server via the ACME protocol." I'm hoping the difficulty we're seeing is down to the certificate being created once (and not again for 7 days). Otherwise, we're not decoding/understanding the OID's contents properly. Thanks.

We are managing VPP license switching operations using Apple's VPP Manage Licenses API. License information is managed by matching the “clientUserIdStr” data with the VPP account ID information managed on the server side. We received an inquiry stating that a VPP license did not activate despite the activation process being performed. Upon checking the API results, the update API returned a success status during execution. However, the “clientUserIdStr” information was missing from the license information field in the response of the information retrieval API. We kindly request your guidance on the reason why the “clientUserIdStr” information is missing when retrieving license information, and the steps to ensure this information is reliably returned. VPPAccoountId:0123456789abcdef0123456789abcdef adamIdStr:521974902 *Some details have been altered from the actual data to protect personal information.

Hello, I would like to ask a question regarding documentation related to app sales. Currently, I’m researching the sales process for an app and realized that I lack sufficient understanding when it comes to creating official documents such as estimates, invoices, and receipts — especially when dealing with corporate clients. In our company’s case, we can issue documents based on the net revenue (after platform fees are deducted). However, when issuing these documents to a client, would it be more appropriate to include a breakdown showing both the platform fee and the app usage fee? I would greatly appreciate any insights or examples of how others have handled similar situations. Thank you in advance.

I want to install Chrome extension via configuration profile without user needing to go to System Settings and install profile manually. Can i install configuraation profile by making user only interact with my app?

Hello, I am trying to authenticate to the Apple Business Manager API to retrieve device information and ingest it into ServiceNow. I am following the documentation here. The first step is to create an API account and download the private key used to create a JWT client assertion. The guide linked above gives a python script to create a client assertion. Below the first python script, the following description is given for the "kid" variable: "The value is your keyId that returns when you upload a public key." This is the first time that a public key, rather than a private key, is referenced. Where is the public key supposed to be uploaded? Later in the guide, a public key is referenced again, in the section describing the client_id Request parameter: "(Required) You receive your clientId when you upload a public key." I have tried to create a client assertion using the keyId that is associated with the API account. When I try to request an access token, however, I also get an "invalid_client" error back. I am wondering if I'm using the wrong values for both key_id and client_id due to not creating and uploading a public key. Any help would be appreciated, thanks!

Hi, I developed a Platform Single Sign-On extension and a corresponding extension for my IdP, which is Keycloak based. The code for both projects are here: https://github.com/unioslo/keycloak-psso-extension and https://github.com/unioslo/weblogin-mac-sso-extension I realized that, when using the Secure Enclave as the AuthenticationMethod, and according to Apple's documentation, the Extension doesn’t obtain fresh ID Tokens when they expire if the refresh token is still valid. When using password as the Authentication Method, it fetches new ID tokens when they expire, without prompting the user for credentials, by using the refresh token. My suggestion is that the same behavior should be implemented for Secure Enclave keys. The thing here is that usually, on OIDC flows, the ID/Access tokens are short-lived. It would make sense for the extension to provide fresh ID tokens. It doesn’t seem to make sense for me that, when using passwords, the extension would fetch these tokens, and not when having the Secure Enclave key. By not doing this, Apple almost forces the developer of an extension to fetch new ID tokens themselves, which doens’t make sense when it clearly provides fresh tokens when using passwords. It almost forces the developers to either implement that logic themselves, or to issue longer tokens, which is not so nice. How so you deal with this? Do you simply use the refresh token as an authentication token, or do you do some sort of manual refresh on the extension?

Issue Description: We are experiencing MDM profile installation failures specifically on iPhone 17 devices. After extensive testing and comparison between affected and working devices, we suspect this appears to be a parameter transmission error rather than device settings. Technical Analysis: Device Settings Comparison: No differences found between problematic and working devices in system settings, indicating this is not a configuration issue. Suspected Parameter Transmission Error: • Device model information appears to be restricted or blocked during profile download • User ID and phone number parameters are not being transmitted to the server • Installation logs show missing login ID and phone number entries Symptoms: • During MDM profile installation, the "Apps & Restrictions" section that should appear is missing • Profile download parameters are suspected to not be properly transmitted to the server • Installation process fails at the profile configuration stage Critical Finding: When we cloned a previously working device to create a problematic device configuration, the cloned device also began experiencing the same installation failures. This strongly suggests the issue is related to device-specific parameters or identifiers. Additional Information: We continue to receive reports of this issue from our iPhone 17 users, and these reports are occurring across various iOS versions. Request for Assistance: Has anyone encountered similar MDM profile installation issues on iPhone 17? Are there known limitations or changes in how device parameters are transmitted during MDM enrollment on this model? Any guidance on debugging parameter transmission or known workarounds would be greatly appreciated.

Hey. If i have a new idea for apple how can i reach out for you?

Hello, I am running into a bit of an issue with the Screen Timeout/Screen Lock setting and would like some clarification on. First for a bit of context, I am enrolling personal iOS devices 18.0+ into the company MDM (Intune) with Account Driven User Enrollment. We are trying to set a screen timeout of 5 minutes and immediately after it asks for the passcode on the device, though this setting is not being applied and the device timeout setting can be set as "Never" on the user's end. This is a big security risk for the company I work for and and the issue with being HIPAA compliant. According to the Microsoft Intune Support, "In iOS 18, when using Account-Driven User Enrollment for BYOD (Bring Your Own Device) scenarios, the screen lock timeout setting is indeed marked as “Not Applicable”. This is because Apple’s privacy-preserving model for personal devices restricts administrative control over system-level settings like screen lock or idle timeout." I am needing clarification on the item mentioned from Microsoft Intune Support and if this setting is no longer able to be applied from the MDM with devices enrolled with Account Driven User Enrollment?

私は現在Intuneを使ったAppleIntelligenceの機能制限方法を調査しております。 AppleIntelligenceの機能のうち、以下5点を制御したく、その方法について教えてほしいです。 ・作文ツール ・Gen文字 ・写真(クリーンアップ機能等) ・さまたげ低減モード(通知の要約・優先順位機能含む) ・ChatGPTのサインイン(同期)・使用 今回ここに聞いた経緯としては、Microsoft社に本調査の確認をとったところ、 「制御後のデバイスの動作についてはAppleのペイロードを使用した制限のため、Appleに確認をとってほしい」 と伝えられたからです。 以下サイトではIntuneのAppleIntelligence機能の制御項目(MDM)が17項目ありますが、 ところどころ実動作について文章では理解ができない部分がありました。 ・https://techcommunity.microsoft.com/blog/intunecustomersuccess/microsoft-intune-support-for-apple-intelligence/4254037 AppleDeveloperサポートにも確認をとりましたが、以下サイトを紹介のみで、 特に追加の情報はありませんでした。 ・https://developer.apple.com/documentation/devicemanagement/restrictions 上記５機能を制限するためにはどの制限項目を使用すればよいでしょうか。

We have been trying to figure out how to block Apple Private Relay in our enterprise so we can monitor and filter our employees traffic. We are able to block the Private Relay via this process: We used this article from Fortinet to achieve this: https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-block-iCloud-Private-Relay-from-bypassing/ta-p/228629 This also appears to block the users ability to utilize Apple iCloud Drive Backups. They would like to allow that still. Is there a way to block iCloud Private Relay while still allowing iCloud Drive Backups to work? I am not finding a document listing the URL requirements for iCloud Drive Backups. We currently have this solution in place: https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-allow-iCloud-private-relay/ta-p/383703 Basically this solution is allowing all Apple URL/IPs to go through the firewall and not be filtered. They would like to scan the traffic through. When scanning is enabled the firewall blocks the iCloud Private Relay traffic as it is blocked as being a proxy. Any guidance is greatly appreciated.

Last year I used the iOS Distribution Managed Certificate (Enterprise Program) to sign an App and to distribute it internally. The Cert is still valid until May 2026. But its associated Provisiong Profile (which is not visible in the Apple Portal, but within Xcode when you export your archive) expired last week. Until then it was impossible for me to somehow force renew the profile and that lead to the fact that my app was not usable for a day, because the renewal was done after the expiration of the old one. Whats the whole point of the managed signing if can't influence the provisioning update. To be clear: I don't speak about the certificate - just about the profile. Or am I using it wrong?

We have a WebContentFilter that has an AllowList with a couple of domains and a DenyList that includes www.apple.com. This works on iOS18.x but doesn't work in iOS26 as www.apple.com can be reached. https://support.apple.com/en-gb/guide/deployment/depc77c9609/web Indicates that .apple.com is always accessible but evidence seems to indicate this wasn't the case pre iOS26. An older version of this page https://web.archive.org/web/20220427202204/https://support.apple.com/en-gb/guide/deployment/depc77c9609/web has no mention of .apple.com although field names are also different. Has this change come about due to the filtering changes introduced in iOS26 and is there any way we can still block .apple.com going forward. Would a content plugin be an options ?

Apple face app is used to fore video calling and chatting and voice calling AP same a what’s app tango etc…

Hello, I am an iOS developer managing an MDM app. In this app, we are only using the camera restriction feature. Can the MDM status (specifically, the camera state) be changed while the user's screen is locked? We want to communicate with our server in the background and apply changes, but there is no known information about this. I would appreciate your help!

May I know the checking mechanism for the ios Provisioning profile? Is my Apple app distributed by MDM inside the organisation? If the Provisioning profile is expired , what is the behaviour when user run the App and how to perform the checking mechanism , is it performed at user client side device or Apple server via online access.

I have a question regarding MDM functionality for iOS/iPadOS. Background: According to Apple's support page(https://support.apple.com/en-us/125073), since iOS 26.1, "Previous Wi-Fi configurations will be replaced when a new profile is installed." We have observed that because of this change, when we apply a Wi-Fi configuration profile to an iPad via MDM, the manually configured network settings on the device (specifically, "Configure IPv4" and "Configure DNS") are reset to "Automatic". This erases the manually entered IP address, subnet mask, router, and DNS server addresses. Goal: We want to apply a Wi-Fi configuration profile from our MDM server to connect the device to a specific SSID, while preserving the manual IP and DNS settings that have been configured on the device. Question: Is there a way to prevent the IPv4 and DNS settings from being switched from "Manual" to "Automatic" when applying the configuration profile? For example, is there a specific key-value pair we can add to the profile to either preserve the existing manual settings, or to explicitly define manual/static IP settings within the profile itself for iOS/iPadOS? Reference: Sample Configuration Profile Below is a simplified version of the Wi-Fi configuration profile we are currently using. This profile does not contain any keys for IP address configuration. <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>PayloadContent</key> <array> <dict> <key>PayloadType</key> <string>com.apple.wifi.managed</string> <key>PayloadIdentifier</key> <string>com.apple.wifi.managed.13E2E6B3-D4B9-4E23-888A-524B3ED40C38</string> <key>PayloadUUID</key> <string>13E2E6B3-D4B9-4E23-888A-524B3ED40C38</string> <key>PayloadVersion</key> <integer>1</integer> <key>SSID_STR</key> <string>SSID</string> <key>EncryptionType</key> <string>WPA</string> <key>Password</key> <string>Password</string> </dict> </array> <key>PayloadType</key> <string>Configuration</string> </dict> </plist>

I applied over a month ago and haven't heard back to the Apple Small Business Program. What should I do to speed things up?