Issue Description: We are experiencing MDM profile installation failures specifically on iPhone 17 devices. After extensive testing and comparison between affected and working devices, we suspect this appears to be a parameter transmission error rather than device settings. Technical Analysis: Device Settings Comparison: No differences found between problematic and working devices in system settings, indicating this is not a configuration issue. Suspected Parameter Transmission Error: • Device model information appears to be restricted or blocked during profile download • User ID and phone number parameters are not being transmitted to the server • Installation logs show missing login ID and phone number entries Symptoms: • During MDM profile installation, the "Apps & Restrictions" section that should appear is missing • Profile download parameters are suspected to not be properly transmitted to the server • Installation process fails at the profile configuration stage Critical Finding: When we cloned a previously working device to create a problematic device configuration, the cloned device also began experiencing the same installation failures. This strongly suggests the issue is related to device-specific parameters or identifiers. Additional Information: We continue to receive reports of this issue from our iPhone 17 users, and these reports are occurring across various iOS versions. Request for Assistance: Has anyone encountered similar MDM profile installation issues on iPhone 17? Are there known limitations or changes in how device parameters are transmitted during MDM enrollment on this model? Any guidance on debugging parameter transmission or known workarounds would be greatly appreciated.

Hello, I’m facing an issue while trying to add iOS devices to Apple Business Manager (ABM) using Apple Configurator during enrollment. When going through the setup process, the device fails to complete enrollment and times out. I’ve tried it multiple times. The device does appear in ABM during the process and I am able to assign it to different MDM servers but since the setup times out and fails, the device is automatically released. I have tried this with multiple iOS devices and it times out on every single one of them. Steps attempted: Factory reset and re-enrollment of the device Ensured network connectivity is stable and tested on multiple Wi-Fi networks Tried the following process using Apple Configurator on Mac (wired): Created a Wi-Fi profile in Configurator Connected the iPhone via cable and used Prepare (manual configuration) Used the “MDM server” placeholder and trusted anchors (as recommended) Linked the device to the ABM organization Skipped Setup Assistant steps Attached the Wi-Fi profile, then prepared and wiped the device Verified that the device should appear in ABM Attempted to assign the device to my MDM in ABM Despite these checks, the enrollment process times out. I’m attaching a screenshot of the error for reference. Could someone advise what might be causing this timeout or how I can further troubleshoot this? Any guidance would be greatly appreciated. Thanks in advance.

Hi, I’m testing the ClearPasscode MDM command: https://developer.apple.com/documentation/devicemanagement/clear-passcode-command Question: If a user enters the passcode incorrectly multiple times and the device becomes temporarily locked (e.g., “Try again in X minutes”) or reaches “Security Lockout”, can ClearPasscode still be executed successfully while the device is in that state? {'ErrorCode': 5013, 35708 'ErrorDomain': 'MCPasscodeErrorDomain', 35709 'LocalizedDescription': '\xe3\x81\x93...x89', 35710 'USEnglishDescription': 'The passcode cannot be cleared (-1)'} If it depends on conditions (e.g., supervised vs. user enrollment, availability of UnlockToken, network/check-in state), could you clarify which conditions are required? Thank you.

Hello, I am trying to authenticate to the Apple Business Manager API to retrieve device information and ingest it into ServiceNow. I am following the documentation here. The first step is to create an API account and download the private key used to create a JWT client assertion. The guide linked above gives a python script to create a client assertion. Below the first python script, the following description is given for the "kid" variable: "The value is your keyId that returns when you upload a public key." This is the first time that a public key, rather than a private key, is referenced. Where is the public key supposed to be uploaded? Later in the guide, a public key is referenced again, in the section describing the client_id Request parameter: "(Required) You receive your clientId when you upload a public key." I have tried to create a client assertion using the keyId that is associated with the API account. When I try to request an access token, however, I also get an "invalid_client" error back. I am wondering if I'm using the wrong values for both key_id and client_id due to not creating and uploading a public key. Any help would be appreciated, thanks!

Hi I am trying to develop Apple MDM solution as a vendor. I got the Vendor certificate from apple developer portal. When I was trying to generate the csr and upload to Portal (https://identity.apple.com/pushcert/) It says Invalid Certificate Signing Request. I had also tried to follow documentation (https://developer.apple.com/documentation/devicemanagement/setting-up-push-notifications-for-your-mdm-customers) but still the same error. Can anyone please guide how to generate the csr.

Hello, we use an MDM profile that enables FDA for our program. The Identifier is set to be the path to our program. We'd like to have a profile that allows multiple CodeSignatures. Our older programs are signed with a different certificate than the current ones. We tried deploying 2 profiles (one for the 'old certificate' signed binary and the other for the 'new certificate' signed binary). But it looks like that MacOS accepts only one. I have also tried to use ProfileCreator to generate a profile with 2 entries, but it fails to do it. Manually editing the XML file and adding new entries does not work either. I'd like to know if there's a workaround for this issue.

We are experiencing a critical issue where VPP app installations are consistently taking an excessive amount of time, leading to significant delays in asset association. We are deployionThis is a systemic problem that affects all VPP apps, not just an isolated case. Apps: 39470db7-e475-4269-9709-c80641657027 => com.zimride.instant d0876900-2579-463e-99f1-b7c85ef5c5e8 com.microsoft.azureauthenticator Troubleshooting: We have performed extensive troubleshooting and can confirm the following: VPP Token: The VPP token has been successfully renewed and is currently active and valid. License Availability: We've verified that there are sufficient VPP licenses available for the apps being deployed. Device Status: We've attempted the following on the affected devices: Restarted the devices. Switched to different Wi-Fi networks. Uninstalled and re-installed the apps. App Status: The issue is not limited to a single app; all VPP apps are failing to install. License Revocation: We attempted to revoke and reassign licenses for some devices, but this did not resolve the issue. The app was not pushed, and the pending status remained. Troubleshooting: Through our internal investigation, we have determined that the core issue is that the Asset Association Status is consistently taking excessive time. This seems to be preventing the app installation queue from processing. We have observed a significant delay in the processing of events within the Notification Channel. The time between the event being created and a response being received is excessively long, indicating a potential backlog or issue. We have included a few recent examples below for your reference: Event ID: 39470db7-e475-4269-9709-c80641657027 com.zimride.instant Created Time: 2025-08-26 01:02:04 Response Time: 2025-08-26 01:34:05 Event ID: d0876900-2579-463e-99f1-b7c85ef5c5e8 com.microsoft.azureauthenticator Created Time: 2025-08-25 21:16:29 Response Time: 2025-08-25 22:21:07 We would appreciate your help in the following areas: Resolution: Could you provide any known solutions or workarounds for an asset association status that is taking excessive amount of time'? Best Practices: Are there any recommended best practices or additional parameters we should be checking with the MDM that might influence the queueing of VPP app assignments? Queueing Parameters: Could you provide insight into the parameters or conditions that can affect the queueing and processing of VPP app installations on Apple's servers? Please let us know if there is any additional information or logs we can provide.

I am trying to find clarification on something. We are seeing strange cases where customer devices seem to unenroll themselves after a period of MDM inactivity. This seems to tie into roughly when their identity certificate has expired. We can't confirm this because the device has since unenrolled. Is there any case where an Apple device will automatically unenroll if it's identity certificate has expired? This doesn't always seem to happen - I had a device respond immediately after being switched off for a year - but could this be down to some devices being DEP enrolled and others manually enrolled?

We’re exploring the use of Apple’s Automatic Assessment Configuration entitlement for an iOS app currently in the proof-of-concept stage. We’re enrolled in the Apple Developer Program with an active subscription. Both the Account Holder and team members have accepted all relevant license agreements. However, when we try to access the entitlement request form at: 👉 https://developer.apple.com/contact/request/automatic-assessment-configuration/ We are immediately redirected to: 🚫 https://developer.apple.com/unauthorized/ This happens for all team members, including the Account Holder, so it doesn’t appear to be a role-specific permissions issue. The app is still in the proof-of-concept stage — there’s no App Store listing or App ID yet. We’re trying to confirm entitlement eligibility before proceeding further. Questions: Is an App Store listing or App ID required to access this request form? Are there any hidden prerequisites (account permissions, team roles, prior submissions, etc.) that need to be fulfilled? Has anyone here successfully submitted this form — and if so, what steps or conditions were required? Any guidance or shared experience would be greatly appreciated. Thanks in advance!

I have created a jwt token with headers { 'typ': 'JWT', 'alg': 'RS256' } and claim as : { 'iss': dep server UUID from Accounts call, 'iat': epoc time in seconds, 'jti': random uuid, 'service_type': 'com.apple.maid' } And signed the token with private key created during DEP MDM server creation. On the device I see Verification error when tried to login with Managed Apple account. In ABM, Access management setting was set to Managed Devices /Supervised only. Any help would be appreciated.

Im trying to make my own iOS MDM Server with SCEP. I cant send a response to the PKIOperation without the iPad rejecting it. Can someone post the PKIOperation response structure

I'm are attempting to use the device management migration feature in Apple Business Manager / Apple School Manager (for devices running iOS 26 / iPadOS 26) to re-assign managed devices from one MDM server to another. We followed the published procedure (select device(s) → Assign Device Management → Set deadline → Continue). However, we are observing that on the device side, no notification or prompt appears to the user (such as “Enrollment Required” or “Your organization requires this device to enroll in a different device management service”), even after the migration deadline has passed. Here are the environment details: Device OS version: (iOS 26.1) Device ownership: enrolled via Automated Device Enrollment MDM re-assignment in ABM: old MDM server（name: https://dev5.clomo.com/panel/mackey-dev/ ） → new MDM server (name: https://obliging-bunny-equally.ngrok-free.app/ ) Deadline set: (12/10/2025 12:00 AM) Network connectivity: confirmed online at deadline time We would like to know: Under what exact conditions will the device display the notification/prompt, and what common mis-configurations prevent it from appearing? Is there any device log or activity indicator in ABM/ASM to confirm that the migration instruction has been sent to the device? In cases where the prompt does not appear, what troubleshooting steps can we perform on the device (or in the MDM/ABM configuration) to correct it?

Subject: Questions Regarding Signing Certificates for MDM Configuration Profiles Dear all, I hope this message finds you well. I have some questions regarding the signing certificates used for MDM configuration profiles. Currently, our company uses an SSL certificate to sign MDM configuration profiles. However, with the announcement that the validity period of SSL certificates will gradually be shortened starting in 2026, we are considering alternative options for signing certificates. Through our internal testing and investigation, we have found examples of the following certificate chains being used: ・Developer ID - G1 (Expiring 02/01/2027 22:12:15 UTC) + Developer ID Application certificate chain ・Apple Root CA + Apple Worldwide Developer Relations Intermediate Certificate + MDM CSR certificate chain We would appreciate any insights or experiences you can share regarding the following points: Apple Support previously advised that "certificates issued by public certificate authorities (CAs) trusted by Apple" are recommended. The certificates listed at https://www.apple.com/certificateauthority/ are typically preinstalled on Apple devices. Are these considered "trusted public CAs" by Apple in this context? Is it acceptable in practice to use a certificate obtained from the “Certificates, Identifiers & Profiles” section on developer.apple.com for signing MDM configuration profiles? We would be grateful to hear about any real-world experiences. If the answer to question 2 is yes, which certificate type within “Certificates, Identifiers & Profiles” would be most appropriate for signing configuration profiles? If using certificates from question 2 is not suitable, are there alternative certificate types (other than SSL) that are valid for longer periods (e.g., more than one year) and appropriate for signing MDM configuration profiles? Apple's official documents do not seem to clearly specify what type of certificate should be used to sign MDM configuration profiles. If you know of any helpful documents or resources related to this topic, we would greatly appreciate it if you could share them. Thank you very much for your time and support. We would truly appreciate any advice or guidance you can provide.

I'm writing to point out a potential structural error in an example of the DeclarativeManagement command. This could cause significant confusion for developers implementing the MDM protocol. The standard structure for a server-to-device MDM command requires CommandUUID and the Command dictionary to be siblings under the top-level dictionary. The CommandUUID serves as a top-level identifier for the entire command envelope. This is the correct, expected structure: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Command</key> <dict> <key>Command</key> <dict> <key>RequestType</key> <string>DeclarativeManagement</string> </dict> </dict> <key>CommandUUID</key> <string>0001_DeclarativeManagement</string> </dict> </plist> This is an example of the incorrect structure I've seen: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Command</key> <dict> <key>CommandUUID</key> <string>0001_DeclarativeManagement</string> <key>Command</key> <dict> <key>RequestType</key> <string>DeclarativeManagement</string> </dict> </dict> </dict> </plist>

Dear Team, We are working on retrieving email address of the user joined to Entra ID from Entra-joined macOS devices, specifically while running in a system context.The sudo dscl . -read /Users/$(whoami) RecordName command give the local user name whose password is synced with the entra ID. We would greatly appreciate guidance on how to retrieve the Entra ID joined user’s email address in a system context from Entra Joined mac devices, especially from those with prior experience in this area. Thank you for your support.

Steps to Reproduce Step 1: Fetch Initial Device List Called the device list endpoint to retrieve all devices and saved the cursor: GET https://mdmenrollment.apple.com/server/devices Step 2: Modify Devices Added and deleted several devices via https://business.apple.com/ Step 3: Sync Without Pagination Called the sync endpoint using the cursor from Step 1 (no limit): GET https://mdmenrollment.apple.com/devices/sync?cursor={step1_cursor} Result: Returned 3 device records as expected: { "devices": [ { "serial_number": "F70JJ4C16L", "op_type": "added", "op_date": "2025-12-11T07:05:05Z" }, { "serial_number": "F70JJ4C16L", "op_type": "deleted", "op_date": "2025-12-11T07:04:36Z" }, { "serial_number": "C8RWGXZXJWF5", "op_type": "deleted", "op_date": "2025-12-11T07:04:52Z" } ], "more_to_follow": false } Step 4: Sync With Pagination (First Page) Called the sync endpoint using the same cursor from Step 1 with limit=1: GET https://mdmenrollment.apple.com/devices/sync?cursor={step1_cursor}&limit=1 Result: Returned 1 record with more_to_follow: true — indicating more data exists: { "devices": [ { "serial_number": "F70JJ4C16L", "op_type": "added", "op_date": "2025-12-11T07:05:05Z" } ], "more_to_follow": true, "cursor": "MTowOjE3NjU0MzgyNDI5ODc6..." } Step 5: Sync With Pagination (Second Page) Called the sync endpoint using the cursor from Step 4 with limit=1: { "devices": [], "more_to_follow": false } Expected Behavior When paginating with limit=1, the API should return all 3 records across 3 sequential requests. Actual Behavior Without pagination: Returns 3 records ✓ With pagination (limit=1): Returns only 1 record, then empty array ✗ 2 records are missing when using pagination. Impact This inconsistency makes the sync API unreliable for incremental device synchronization workflows.

I'm using Apple's MDM protocol InstalledApplicationListCommand to get information about installed apps. From iOS/iPadOS 26, the app information obtained by InstalledApplicationListCommand includes information on all apps including system apps (apps that come standard with iOS/iPadOS). https://developer.apple.com/documentation/devicemanagement/installed-application-list-command I want iOS/iPadOS26 to get the same information as the app information I get from the previous iOS/iPadOS, and I want to exclude system apps from the app information I get with the InstalledApplicationListCommand. As a way to exclude system apps, you can use the app ID I'm thinking of a way to exclude anything that starts with "com.apple" (the Identifier key value of the InstalledApplicationListResponse.InstalledApplicationListItem object). As a way to exclude system apps, please tell us whether the above method is appropriate and whether there will be any problems in the future.

can you make a profit with the seed program

We are moving to Apple Business Store for our b2b customers. On the "residential" apple store side there is testflight. What process would one test an app we provide to a b2b customer when using apple business store publishing? (I don't see any sort of test flight for apple business)

Hi, Is there a method to hide individual items in System Settings that is not Deprecated? It needs some of the settings set and hidden for the end user. I found the DisabledSystemSettings key however it is marked as Deprecated and does not include all the new items, especially those related to Apple Intelligence. Is there any method other than “Restrictions” that does not hide and only set individual settings ? It needs to hide items in system settings :)