If there is a Notification Service Extension which has the com.apple.developer.usernotifications.filtering entitlement, then does/how having that entitlement affect the preconditions for the NSE to be delivered a push? Specifically, if the app has not prompted for requestAuthorization() is it expected that the push will be delivered to the NSE or not? Thank you

I trying to validate the certificate I created for APNS using the following command but I get an error. openssl s_client -connect gateway.push.apple.com:2195 -cert temp.pem -debug -showcerts Error: getaddrinfo: nodename nor servname provided, or not known connect:errno=0 Any help will be greatly appreciated.

Hi all, We’re implementing in-app subscriptions in our iOS app using App Store Server Notifications V2 in the production environment. Everything is generally working well — we receive notifications such as DID_CHANGE_RENEWAL_STATUS, CANCELLATION, etc., and we log all incoming notifications into our own database. However, we've encountered a single case where the INITIAL_BUY notification was not received for a specific user. Interestingly, we did receive the later notifications (DID_CHANGE_RENEWAL_STATUS and CANCELLATION) for that same user. Here is our setup: App Store Server Notifications V2 Notification endpoint is stable and functioning normally (receives and logs other notifications) Notifications are reliably stored in our database The issue occurred only once for one user Environment: Production We've already contacted Apple Developer Support, but were informed that this issue is out of scope for direct support, and were directed to the Developer Forums. Our questions: Under what conditions might the INITIAL_BUY notification fail to be sent or delivered? Is there any known behavior or scenario where Apple may skip the INITIAL_BUY notification? Any recommendations on how to further investigate or verify whether it was sent from Apple’s side? We’ve confirmed that the notification never hit our server (no logs, no DB record), and our system was healthy at the time. Any insight would be greatly appreciated. Thank you!

Dear Apple Team, I hope this message finds you well. I wanted to share a playful and innovative idea that could enhance the iPhone experience—particularly when viewing content in full-screen mode through apps like Apple TV or YouTube. Feature Concept: Hands-Free Dismissal of Notifications When the iPhone is in landscape mode, incoming notifications can interrupt the viewing experience. While Focus Mode and swipe gestures help, I thought of a more intuitive and hands-free interaction: using a light puff of air directed toward the screen to dismiss a notification. This interaction could use the microphone or other onboard sensors to detect a brief burst of air, providing a fun and natural way to maintain immersion without touching the device. If this isn’t feasible with current hardware, here are a few alternative concepts that align with the same goal: Blink to Dismiss: Using Face ID sensors to detect a quick blink as a hands-free gesture. Shake to Dismiss: A gentle shake gesture when holding the iPhone in one hand. Gaze-Based Dismissal: Notifications automatically disappear after a brief moment of eye contact. These ideas could offer both accessibility benefits and a touch of delight—making the iPhone feel even more magical and responsive. Thank you for your time and for considering this suggestion! Warm regards, Badhan Baidya

In iOS 26, I can check the notification that arrives to the user when the AirPods or Apple Watch is fully charged. When tap the notification, notification only expands and does not include actions such as moving to an app. I checked the documents of UserNotification and UNNotificationServiceExtension, but I couldn't find what I wanted. I can expand by long-tapping as default, but I'm looking for a way to expand it without entering the app when I tap the notification. I wonder if there is an API that I missed or if it's not publicly supported. thank you for your support.

Excited for AlarmKit! I have found two concerns that I cannot find answers for though. The volume of my alarms seems to be very quite relative to the full volume capability of the device. For example, if I turn the volume all the way up and play the audio file, the sound is very loud. However then, if I set the alarm using alarm kit with the same audio, the track played during the alerting phase is not that loud. I am afraid that it will not be loud enough in real life. Will there be future support to set the volume level of the alarm to maximum settings? When I press the volume buttons (with the app open) during an active alarm, the audio stops, but the alarm manager does not clear these events. The alarm manager does clear the alarm event if the alarm is stopped through a live activity.

I am developing an iOS app that uses App Store Server API (v2) for auto-renewable subscriptions. I noticed a discrepancy between the expiration date returned by the API and the date displayed in iPhone Settings > Subscriptions: App Store Server API expiresDate: 2025-09-12T12:10:25 (KST) iOS Settings > Subscriptions: 2025-09-11 (one day earlier) My understanding: The API’s expiresDate is the precise UTC timestamp. The Settings UI might display the "last full calendar day" for UX purposes. Questions: Is this behavior (UI showing one day earlier) an intentional Apple policy? If so, is there any official documentation or guideline explaining this behavior? Should developers always rely on the API’s expiresDate for subscription state management? This discrepancy is confusing for both developers and end users, so any clarification or official reference would be greatly appreciated.

My app(The Smart Life app) is unable to receive push notifications. Please confirm whether APNs has received push notifications from Alibaba Cloud and whether APNs has successfully pushed notifications to the Smart Life app.The Smart Life app uses Alibaba Cloud's push notification service. The message ID pushed by Alibaba Cloud is: f7a02288-a995-47ed-b417-837461028f03 Current Symptom: Alibaba Cloud has reported that this message has been successfully pushed to APNs, but the smart life app has not received any push notifications. The feedback log from Alibaba Cloud shows that the APNs push was successful, but the smart life app did not receive any push. Because APNs do not have message receipts and Alibaba Cloud cannot obtain notification delivery status, it is recommended that I use the APNs channel message ID to submit a work order to Apple technical support for investigation. Note: All push notification permissions for the Smart Life app are enabled, and the Smart Life app is in the foreground when push notifications are sent.

We're trying to add simple notifications to our CarPlay integration that should open certain template when pressed, but the issue is that when pressing this notification on CarPlay screen nothing is invoked in the code (presumably didReceive should be invoked). All works fine with the same notification but pressed on the iPhone screen - didReceive is invoked properly. How should I handle the action when push notification is pressed on CarPlay screen?

When I turn the Ringtone and Alerts volume all the way up, I expect standard notifications to play at the loudest level the device allows. In theory, this should match the volume of a critical alert with its sound.volume set to 1.0 in payload. However, I’ve noticed that non-critical notifications still play quieter than critical alerts under these conditions. Critical alerts with volume: 1.0 sound noticeably louder than standard notifications, even though the Ringtone and Alerts slider is already set to maximum. And I couldn't find a documentation for this behavior anywhere. Is this expected behavior on iOS? And is there any way to make non-critical notifications play at the same maximum loudness as critical alerts? Thanks in advance for any clarification.

We have a question regarding iOS app configuration and the Remote notifications background mode. During our testing, we observed: ＊When enabling or disabling Signing & Capabilities > Background Modes > Remote notifications, the change does not take effect on devices that already have the app installed. ＊The app continues to behave according to the old configuration. ＊Only after uninstalling the app and reinstalling it from the App Store do the new settings take effect (for example, whether the app can be woken up by silent push). ＊We also tested updating the app with a new version number (App Store upgrade flow), but the new settings still did not apply. Our questions are: 1.Is there any way to make iOS re-read the updated Signing & Capabilities (Background Modes) settings without requiring a full uninstall/reinstall? 2.Is it expected behavior that even an App Store upgrade with a new version number will not apply these changes? thanks!

ISSUE: CloudKit subscriptions are not triggering push notifications despite correct configuration. CloudKit logs show RecordSave events but NO NotificationSend events, indicating CloudKit is not attempting to send to APNS. CONTAINER: iCloud.Wunderkind.StrikeForceApp ENVIRONMENT: Tested in both Development and Production iOS 18.6.x Xcode 15.x (update with your version) Device: iPhone (not simulator) EVIDENCE: Subscriptions exist and are visible in CloudKit Dashboard Records are being created successfully (verified in logs) Device token is registered: 60eb962ff189dc5c2c0ef3e9d6643d72b4442a831bae224d2a553588b2e29139 Local notifications work correctly CloudKit logs show RecordSave but NO NotificationSend events STEPS TAKEN: Regenerated push certificates Disabled and re-enabled Push Notifications capability Deleted and recreated subscriptions Tested in both Development and Production environments Verified aps-environment entitlement matches environment Confirmed notification permissions granted SPECIFIC TEST: Creating a Challenge record with recipientRef matching my user triggers: ✅ RecordSave event in CloudKit logs ❌ No NotificationSend event ❌ No push notification received EXPECTED: CloudKit should send NotificationSend events and deliver push notifications when subscriptions match. ACTUAL: No NotificationSend events appear in CloudKit logs, no notifications delivered.

Could anyone play a sound from the Library/Sounds directory using alarmkit? Same file can play in app bundle, but not available in Library/Sounds directory. Is this by design?

Notification coordination between iOS and watchOS is not working properly watchOS and iOS try to coordinate between phone and watch notifications. The concept here is that if there is a main app and a companion app, they could both be sending a notification, then the notification would alert on both, which is a deviation from how notification mirroring is handled if there is an iOS app but no watch app. The watch waits for the iOS notification to fire so they can determine if this is the same notification that needs to be deduped, displayed on one device but not the other, or separate notifications to be displayed both. If there is no notification on the phone, the watch will timeout after 13 seconds and alert anyway. If you have an iOS companion app, the best solution to this is to send the same notification on both devices simultaneously, and ensuring the UNNotificationRequest.identifier matches on both notifications. This will let the systems determine how to handle the notification correctly and quickly, and the notification will alert right away. https://developer.apple.com/forums/thread/765669 According to the above article, "when a notification arrives on watchOS alone first, it coordinates with iOS," but in reality, it doesn't work properly. Detailed process of this phenomenon watchOS receives a notification. On watchOS, the notification is not immediately shown to the user. iOS receives a notification with the same UNNotificationRequest.identifier as in (1). The notification in (3) does not appear on either iOS or watchOS. However, the notification from (3) does appear in iOS Notification Center. Thirteen seconds after watchOS received the notification, the notification from (1) is shown to the user on watchOS. In the end, the iOS and watchOS notifications are not consolidated and each remains in its respective notification center. Up to (3) there are no issues. Starting with (4), both iOS and watchOS exhibit a lot of odd behavior. This phenomenon occurs with both local notifications and push notifications. When iOS receives the notification first, there is no problem. The notification for watch received later is processed appropriately, and the watchOS notification is not additionally displayed to the user. Expected proper process Same as above. Same as above. Same as above. The notification in (1) is integrated into the notification in (3). The notification in (3) is alerted to the user immediately. 2 sample projects to reproduce Only the main code is attached. Sample project1: local notifications Swift code for local notification app (iOS, watchOS) - App.swift.txt Sample project2: push notifications This sample project is implemented using Firebase Functions and Firebase Cloud Messaging. Swift code push notification app (iOS, watchOS) - App.swift.txt Server side JavaScript code for FirebaseFunction - index.js.txt Tested devices and OS This phenomenon occurred in both of the following patterns. Pattern 1 Xcode 26.0 iPhone 16 (iOS 26.0) Apple Watch series 10 (watchOS 26.0) Pattern 2 Xcode 16.4 iPhone 11 (iOS 18.6) Apple Watch SE 2nd gen (watchOS 11.6) Question Is this phenomenon a bug? Or is my understanding or implementation incorrect? Feedback Assistant number FB20339772

I’m using the shielding API, my code: let store = ManagedSettingsStore() let whitelist = SharedDefaults.whitelistApplications store.shield.applicationCategories = .all(except: whitelist) And to clear the shield, my code is: store.shield.applications = nil store.shield.applicationCategories = nil The issue: Some users report that after uninstalling my app, the shield is still active, and the UI changes to the default iOS system interface. Even after restarting the device, the apps on the phone remains locked, so the user has no way to remove the shield. Recently I’ve received several complaints on social media and App Store comments, accusing my app of being malicious software. This is not a 100% reproducible bug, but it happens frequently enough. I was also able to reproduce it myself by uninstalling the app during an active lock session. Could Apple engineers please look into this issue and advise how to ensure that once the user uninstalls the app, the device is no longer locked?

There's a list of bug reports: FB19778882 FB19813796 FB19852724 FB19767262 FB20378888 FB20379383 FB20394663 Me and many other users have issue with push notifications. To reproduce this you should do this steps: Lock iPhone and make it idle for 10+ minutes; Send any message from other device via third-party app that uses push notifications (WhatsApp, Telegram and etc.); After few attempts you can see, that messages don't deliver. They delivers immediately when I unlock iPhone or go to the app. This bug reproduces on iOS 18.7 and 27. As I think iPhone goes to deep sleep after 10+ minutes after it locked and don't get push notifications. I've tried everything: many of settings, DFU without backup, but nothing helps to resolve this issue. Pay attention, please, cause this bug is very annoying and present on iOS 18.7 (that is the last for many devices) and latest iOS 26. Thanks!

When the app kills the process. Received APNs push message. Push messages carry voice related information. At the same time as receiving the push, obtain the voice playback of this voice message. How to achieve it?

Hi Apple team, We’re shipping a Live Caller ID Lookup extension on iOS 18 and have a question about the automatic refresh of configuration/PIR parameters. Questions 1. Is there any documented interval/TTL (min/max) for the system’s automatic refresh of /config and PIR parameters, or is it entirely opportunistic (battery/network/usage)? I can’t find a cadence in the IdentityLookup docs. 2. Does iOS honor server cache headers (e.g., Cache-Control/Expires) to influence when it re-fetches? 3. Which events also trigger a refresh (enable/disable in Settings, OS/app update, device reboot, token/epoch change)? 4. Are there rate limits or best-practice limits for calling refreshExtensionContext and refreshPIRParameters?

Hi, We have a use case where our app needs to send repeated push notifications (both normal and critical alerts) to inform the user about a critical device state and grab their attention. Since iOS doesn’t allow us to schedule local notifications beyond 30 seconds, I need to send multiple pushes from the server side. My questions are: Is there any documented limit on how many push notifications can be sent back-to-back before Apple starts throttling or restricting them? Are critical alerts treated differently from normal notifications in terms of delivery restrictions or frequency limits? Is there a recommended approach for handling scenarios where repeated urgent notifications are necessary to keep the user informed? I want to make sure I’m following Apple’s guidelines and not risking rejection during review.

Hello Team, We are currently experiencing an issue where some of our devices are not receiving push notifications. We are sending notifications via the Apple Push Notification portal (https://developer.apple.com/notifications/push-notifications-console/) using the following two requests. However, in both cases, the notifications are not being delivered to the devices. Scenario 1 : When we send a request with apns-push-type set to alert, we receive the following error. Request : curl -v --header "authorization: bearer ${AUTHENTICATION_TOKEN}" --header "apns-topic: com.testcompany.sampletest" --header "apns-push-type: alert" --header "apns-priority: 10" --header "apns-expiration: 0" --data '{"aps":{"alert":{"title":"Test Notification Title","subtitle":"Test Notification Sub Title","body":"Test Notification Body"}}}' --http2 https://api.push.apple.com:443/3/device/*devicetoken* Response: { "code": 400, "message": "bad-request", "reason": "The device token is inactive for the specified topic. There is no need to send further pushes to the same device token, unless your application retrieves the same device token.", "requestUuid": "c4ae39b4-87e1-4269-a1e9-163f60ec0385" } Scenario 2 : However, if we send the request with apns-push-type set to background, the request is processed successfully by APNs, but no notification is received on the device. Request : curl -v --header "authorization: bearer ${AUTHENTICATION_TOKEN}" --header "apns-topic: com.testcompany.sampletest" --header "apns-push-type: background" --header "apns-priority: 10" --header "apns-expiration: 0" --data '{"aps":{"alert":{"title":"Test Notification Title","subtitle":"Test Notification Sub Title","body":"Test Notification Body"}}}' --http2 https://api.push.apple.com:443/3/device/*devicetoken* Response: Getting a message that The notification sent successfully but no notification is received on the device. In both cases (with alert and background push types), the push notification does not reach the device. Additionally, when we validated the device token using the APNs Device Token Validator, it appears to be valid and returns the following message. "Device Token is valid for sending Alert & Background push-type notifications in the Production environment" Affected Device: macOS version : MacOS 15.3.1 Processor : Apple M1 Could you please assist me in resolving this issue? Thanks