General: Forums subtopic: App & System Services > Networking TN3151 Choosing the right networking API Networking Overview document — Despite the fact that this is in the archive, this is still really useful. TLS for App Developers forums post Choosing a Network Debugging Tool documentation WWDC 2019 Session 712 Advances in Networking, Part 1 — This explains the concept of constrained networking, which is Apple’s preferred solution to questions like How do I check whether I’m on Wi-Fi? TN3135 Low-level networking on watchOS TN3179 Understanding local network privacy Adapt to changing network conditions tech talk Understanding Also-Ran Connections forums post Extra-ordinary Networking forums post Foundation networking: Forums tags: Foundation, CFNetwork URL Loading System documentation — NSURLSession, or URLSession in Swift, is the recommended API for HTTP[S] on Apple platforms. Moving to Fewer, Larger Transfers forums post Testing Background Session Code forums post Network framework: Forums tag: Network Network framework documentation — Network framework is the recommended API for TCP, UDP, and QUIC on Apple platforms. Building a custom peer-to-peer protocol sample code (aka TicTacToe) Implementing netcat with Network Framework sample code (aka nwcat) Configuring a Wi-Fi accessory to join a network sample code Moving from Multipeer Connectivity to Network Framework forums post NWEndpoint History and Advice forums post Network Extension (including Wi-Fi on iOS): See Network Extension Resources Wi-Fi Fundamentals TN3111 iOS Wi-Fi API overview Wi-Fi Aware framework documentation Wi-Fi on macOS: Forums tag: Core WLAN Core WLAN framework documentation Wi-Fi Fundamentals Secure networking: Forums tags: Security Apple Platform Security support document Preventing Insecure Network Connections documentation — This is all about App Transport Security (ATS). WWDC 2017 Session 701 Your Apps and Evolving Network Security Standards [1] — This is generally interesting, but the section starting at 17:40 is, AFAIK, the best information from Apple about how certificate revocation works on modern systems. Available trusted root certificates for Apple operating systems support article Requirements for trusted certificates in iOS 13 and macOS 10.15 support article About upcoming limits on trusted certificates support article Apple’s Certificate Transparency policy support article What’s new for enterprise in iOS 18 support article — This discusses new key usage requirements. Technote 2232 HTTPS Server Trust Evaluation Technote 2326 Creating Certificates for TLS Testing QA1948 HTTPS and Test Servers Miscellaneous: More network-related forums tags: 5G, QUIC, Bonjour On FTP forums post Using the Multicast Networking Additional Capability forums post Investigating Network Latency Problems forums post WirelessInsights framework documentation iOS Network Signal Strength forums post Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" [1] This video is no longer available from Apple, but the URL should help you locate other sources of this info.

Please consider this very trivial C code, which was run on 15.3.1 of macos: #include <stdio.h> #include <stdlib.h> #include <netinet/in.h> #include <arpa/inet.h> #include "sys/socket.h" #include <string.h> #include <unistd.h> #include <ifaddrs.h> #include <net/if.h> // prints out the sockaddr_in6 void print_addr(const char *msg_prefix, struct sockaddr_in6 sa6) { char addr_text[INET6_ADDRSTRLEN] = {0}; printf("%s%s:%d, addr family=%u\n", msg_prefix, inet_ntop(AF_INET6, &sa6.sin6_addr, (char *) &addr_text, INET6_ADDRSTRLEN), sa6.sin6_port, sa6.sin6_family); } // creates a datagram socket int create_dgram_socket() { const int fd = socket(AF_INET6, SOCK_DGRAM, 0); if (fd < 0) { perror("Socket creation failed"); return -1; } return fd; } int main() { printf("current process id:%ld parent process id: %ld\n", (long) getpid(), (long) getppid()); // // hardcode a link-local IPv6 address of a interface which is down // ifconfig: // ,,, // awdl0: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500 // options=6460<TSO4,TSO6,CHANNEL_IO,PARTIAL_CSUM,ZEROINVERT_CSUM> // ... // inet6 fe80::34be:50ff:fe14:ecd7%awdl0 prefixlen 64 scopeid 0x10 // nd6 options=201<PERFORMNUD,DAD> // media: autoselect (<unknown type>) // status: inactive // const char *ip6_addr_str = "fe80::34be:50ff:fe14:ecd7"; // link-local ipv6 address from above ifconfig output // parse the string literal to in6_addr struct in6_addr ip6_addr; int rv = inet_pton(AF_INET6, ip6_addr_str, &ip6_addr); if (rv != 1) { fprintf(stderr, "failed to parse ipv6 addr %s\n", ip6_addr_str); exit(EXIT_FAILURE); } // create a AF_INET6 SOCK_DGRAM socket const int sock_fd = create_dgram_socket(); if (sock_fd < 0) { exit(EXIT_FAILURE); } printf("created a socket, descriptor=%d\n", sock_fd); // create a destination sockaddr which points to the above // ipv6 link-local address and an arbitrary port const int dest_port = 12345; struct sockaddr_in6 dest_sock_addr; memset((char *) &dest_sock_addr, 0, sizeof(struct sockaddr_in6)); dest_sock_addr.sin6_addr = ip6_addr; dest_sock_addr.sin6_port = htons(dest_port); dest_sock_addr.sin6_family = AF_INET6; dest_sock_addr.sin6_scope_id = 0x10; // scopeid from the above ifconfig output // now sendto() to that address, whose network interface is down. // we expect sendto() to return an error print_addr("sendto() to ", dest_sock_addr); const char *msg = "hello"; const size_t msg_len = strlen(msg) + 1; rv = sendto(sock_fd, msg, msg_len, 0, (struct sockaddr *) &dest_sock_addr, sizeof(dest_sock_addr)); if (rv == -1) { perror("sendto() expectedly failed"); close(sock_fd); exit(EXIT_FAILURE); } printf("sendto() unexpectedly succeeded\n"); // should not reach here, we expect sendto() to return an error return 0; } It creates a SOCK_DGRAM socket and attempts to sendto() to a link-local IPv6 address of a local network interface which is not UP. The sendto() is expected to fail with a "network is down" (or at least fail with some error). Let's see how it behaves. Copy that code to a file called netdown.c and compile it as follows: clang netdown.c Now run the program: ./a.out That results in the following output: current process id:29290 parent process id: 21614 created a socket, descriptor=3 sendto() to fe80::34be:50ff:fe14:ecd7:14640, addr family=30 sendto() unexpectedly succeeded (To reproduce this locally, replace the IPv6 address in that code with a link-local IPv6 address of an interface that is not UP on your system) Notice how the sendto() returned successfully without any error giving an impression to the application code that the message has been sent. In reality, the message isn't really sent. Here's the system logs from that run: PID Type Date & Time Process Message debug 2025-03-13 23:36:36.830147 +0530 kernel Process (a.out) allowed via dev tool environment (/System/Applications/Utilities/Terminal.app/Contents/MacOS/Terminal) debug 2025-03-13 23:36:36.833054 +0530 kernel [SPI][HIDSPI] TX: 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 RX: 20 02 00 00 00 00 38 00 10 02 00 17 00 00 2E 00 26700 error 2025-03-13 23:36:36.838607 +0530 nehelper Failed to get the signing identifier for 29290: No such process 26700 error 2025-03-13 23:36:36.838608 +0530 nehelper Failed to get the code directory hash for 29290: No such process default 2025-03-13 23:36:36.840070 +0530 kernel cfil_dispatch_attach_event:3507 CFIL: Failed to get effective audit token for <sockID 22289651233205710 <4f3051d7ec2dce>> 26700 error 2025-03-13 23:36:36.840678 +0530 nehelper Failed to get the signing identifier for 29290: No such process 26700 error 2025-03-13 23:36:36.840679 +0530 nehelper Failed to get the code directory hash for 29290: No such process default 2025-03-13 23:36:36.841742 +0530 kernel cfil_hash_entry_log:6082 <CFIL: Error: sosend_reinject() failed>: [29290 ] <UDP(17) out so 891be95f39bd0385 22289651233205710 22289651233205710 age 0> lport 60244 fport 12345 laddr fe80::34be:50ff:fe14:ecd7 faddr fe80::34be:50ff:fe14:ecd7 hash D7EC2DCE default 2025-03-13 23:36:36.841756 +0530 kernel cfil_service_inject_queue:4466 CFIL: sosend() failed 50 Notice the last line where it states the sosend() (and internal impl detail of macos) failed with error code 50, which corresponds to ENETDOWN ("Network is down"). However, like I noted, this error was never propagated back to the application from the sendto() system call. The documentation of sendto() system call states: man sendto ... Locally detected errors are indicated by a return value of -1. ... RETURN VALUES Upon successful completion, the number of bytes which were sent is returned. Otherwise, -1 is returned and the global variable errno is set to indicate the error. So I would expect sendto() to return -1, which it isn't. The 15.3.1 source of xnu hasn't yet been published but there is the 15.3 version here https://github.com/apple-oss-distributions/xnu/tree/xnu-11215.81.4 and looking at the corresponding function cfil_service_inject_queue, line 4466 (the one which is reported in the logs) https://github.com/apple-oss-distributions/xnu/blob/xnu-11215.81.4/bsd/net/content_filter.c#L4466, the code there logs this error and the cfil_service_inject_queue function then returns back the error. However, looking at the call sites of the call to cfil_service_inject_queue(...), there are several places within that file which don't track the return value (representing an error value) and just ignore it. Is that intentional and does that explain this issue? Does this deserve to be reported as a bug through feedback assistant?

We have a NEFilterDataProvider extension that intercepts all TCP and UDP IPv4/6 traffic. At times just after wakeup from sleep, it causes internet access issues, such as showing "This site can't be reached" when opening websites. The traffic is not being dropped by the extension. According to the logs, the connection is being closed after approximately 4 minutes. During the issue, the flow logs are as follows: Flow 515129771 is connecting New flow: NEFlow type = stream, app = com.google.Chrome.helper... Detaching, ref count = 2 (logged after ~4 minutes) Sending close, how = 2 Removing from group 2, ref count = 2 Destroying, app tx 0, tunnel tx 0, tunnel rx 0 Closing reads, not closed by plugin Closing writes, not sending close Any suggestions on the possible cause and how to further debug it?

Hi, I'm experiencing intermittent delays with URLSession where requests take 3-4 seconds to be sent, even though the actual server processing is fast. This happens randomly, maybe 10-20% of requests. The pattern I've noticed is I create my request I send off my request using try await urlSession.data(for: request) My middleware ends up receiving this request 4-7s after its been fired from the client-side The round trip ends up taking 4-7s! This hasn't been reproducible consistently at all on my end. I've also tried ephemeral URLSessions (so recreating the session instead of using .shared so no dead connections, but this doesn't seem to help at all) Completely lost on what to do. Please help!

Transport Layer Security (TLS) is the most important security protocol on the Internet today. Most notably, TLS puts the S into HTTPS, adding security to the otherwise insecure HTTP protocol. IMPORTANT TLS is the successor to the Secure Sockets Layer (SSL) protocol. SSL is no longer considered secure and it’s now rarely used in practice, although many folks still say SSL when they mean TLS. TLS is a complex protocol. Much of that complexity is hidden from app developers but there are places where it’s important to understand specific details of the protocol in order to meet your requirements. This post explains the fundamentals of TLS, concentrating on the issues that most often confuse app developers. Note The focus of this is TLS-PKI, where PKI stands for public key infrastructure. This is the standard TLS as deployed on the wider Internet. There’s another flavour of TLS, TLS-PSK, where PSK stands for pre-shared key. This has a variety of uses, but an Apple platforms we most commonly see it with local traffic, for example, to talk to a Wi-Fi based accessory. For more on how to use TLS, both TLS-PKI and TLS-PSK, in a local context, see TLS For Accessory Developers. Server Certificates For standard TLS to work the server must have a digital identity, that is, the combination of a certificate and the private key matching the public key embedded in that certificate. TLS Crypto Magic™ ensures that: The client gets a copy of the server’s certificate. The client knows that the server holds the private key matching the public key in that certificate. In a typical TLS handshake the server passes the client a list of certificates, where item 0 is the server’s certificate (the leaf certificate), item N is (optionally) the certificate of the certificate authority that ultimately issued that certificate (the root certificate), and items 1 through N-1 are any intermediate certificates required to build a cryptographic chain of trust from 0 to N. Note The cryptographic chain of trust is established by means of digital signatures. Certificate X in the chain is issued by certificate X+1. The owner of certificate X+1 uses their private key to digitally sign certificate X. The client verifies this signature using the public key embedded in certificate X+1. Eventually this chain terminates in a trusted anchor, that is, a certificate that the client trusts by default. Typically this anchor is a self-signed root certificate from a certificate authority. Note Item N is optional for reasons I’ll explain below. Also, the list of intermediate certificates may be empty (in the case where the root certificate directly issued the leaf certificate) but that’s uncommon for servers in the real world. Once the client gets the server’s certificate, it evaluates trust on that certificate to confirm that it’s talking to the right server. There are three levels of trust evaluation here: Basic X.509 trust evaluation checks that there’s a cryptographic chain of trust from the leaf through the intermediates to a trusted root certificate. The client has a set of trusted root certificates built in (these are from well-known certificate authorities, or CAs), and a site admin can add more via a configuration profile. This step also checks that none of the certificates have expired, and various other more technical criteria (like the Basic Constraints extension). Note This explains why the server does not have to include the root certificate in the list of certificates it passes to the client; the client has to have the root certificate installed if trust evaluation is to succeed. In addition, TLS trust evaluation (per RFC 2818) checks that the DNS name that you connected to matches the DNS name in the certificate. Specifically, the DNS name must be listed in the Subject Alternative Name extension. Note The Subject Alternative Name extension can also contain IP addresses, although that’s a much less well-trodden path. Also, historically it was common to accept DNS names in the Common Name element of the Subject but that is no longer the case on Apple platforms. App Transport Security (ATS) adds its own security checks. Basic X.509 and TLS trust evaluation are done for all TLS connections. ATS is only done on TLS connections made by URLSession and things layered on top URLSession (like WKWebView). In many situations you can override trust evaluation; for details, see Technote 2232 HTTPS Server Trust Evaluation). Such overrides can either tighten or loosen security. For example: You might tighten security by checking that the server certificate was issued by a specific CA. That way, if someone manages to convince a poorly-managed CA to issue them a certificate for your server, you can detect that and fail. You might loosen security by adding your own CA’s root certificate as a trusted anchor. IMPORTANT If you rely on loosened security you have to disable ATS. If you leave ATS enabled, it requires that the default server trust evaluation succeeds regardless of any customisations you do. Mutual TLS The previous section discusses server trust evaluation, which is required for all standard TLS connections. That process describes how the client decides whether to trust the server. Mutual TLS (mTLS) is the opposite of that, that is, it’s the process by which the server decides whether to trust the client. Note mTLS is commonly called client certificate authentication. I avoid that term because of the ongoing industry-wide confusion between certificates and digital identities. While it’s true that, in mTLS, the server authenticates the client certificate, to set this up on the client you need a digital identity, not a certificate. mTLS authentication is optional. The server must request a certificate from the client and the client may choose to supply one or not (although if the server requests a certificate and the client doesn’t supply one it’s likely that the server will then fail the connection). At the TLS protocol level this works much like it does with the server certificate. For the client to provide this certificate it must apply a digital identity, known as the client identity, to the connection. TLS Crypto Magic™ assures the server that, if it gets a certificate from the client, the client holds the private key associated with that certificate. Where things diverge is in trust evaluation. Trust evaluation of the client certificate is done on the server, and the server uses its own rules to decided whether to trust a specific client certificate. For example: Some servers do basic X.509 trust evaluation and then check that the chain of trust leads to one specific root certificate; that is, a client is trusted if it holds a digital identity whose certificate was issued by a specific CA. Some servers just check the certificate against a list of known trusted client certificates. When the client sends its certificate to the server it actually sends a list of certificates, much as I’ve described above for the server’s certificates. In many cases the client only needs to send item 0, that is, its leaf certificate. That’s because: The server already has the intermediate certificates required to build a chain of trust from that leaf to its root. There’s no point sending the root, as I discussed above in the context of server trust evaluation. However, there are no hard and fast rules here; the server does its client trust evaluation using its own internal logic, and it’s possible that this logic might require the client to present intermediates, or indeed present the root certificate even though it’s typically redundant. If you have problems with this, you’ll have to ask the folks running the server to explain its requirements. Note If you need to send additional certificates to the server, pass them to the certificates parameter of the method you use to create your URLCredential (typically init(identity:certificates:persistence:)). One thing that bears repeating is that trust evaluation of the client certificate is done on the server, not the client. The client doesn’t care whether the client certificate is trusted or not. Rather, it simply passes that certificate the server and it’s up to the server to make that decision. When a server requests a certificate from the client, it may supply a list of acceptable certificate authorities [1]. Safari uses this to filter the list of client identities it presents to the user. If you are building an HTTPS server and find that Safari doesn’t show the expected client identity, make sure you have this configured correctly. If you’re building an iOS app and want to implement a filter like Safari’s, get this list using: The distinguishedNames property, if you’re using URLSession The sec_protocol_metadata_access_distinguished_names routine, if you’re using Network framework [1] See the certificate_authorities field in Section 7.4.4 of RFC 5246, and equivalent features in other TLS versions. Self-Signed Certificates Self-signed certificates are an ongoing source of problems with TLS. There’s only one unequivocally correct place to use a self-signed certificate: the trusted anchor provided by a certificate authority. One place where a self-signed certificate might make sense is in a local environment, that is, securing a connection between peers without any centralised infrastructure. However, depending on the specific circumstances there may be a better option. TLS For Accessory Developers discusses this topic in detail. Finally, it’s common for folks to use self-signed certificates for testing. I’m not a fan of that approach. Rather, I recommend the approach described in QA1948 HTTPS and Test Servers. For advice on how to set that up using just your Mac, see TN2326 Creating Certificates for TLS Testing. TLS Standards RFC 6101 The Secure Sockets Layer (SSL) Protocol Version 3.0 (historic) RFC 2246 The TLS Protocol Version 1.0 RFC 4346 The Transport Layer Security (TLS) Protocol Version 1.1 RFC 5246 The Transport Layer Security (TLS) Protocol Version 1.2 RFC 8446 The Transport Layer Security (TLS) Protocol Version 1.3 RFC 4347 Datagram Transport Layer Security RFC 6347 Datagram Transport Layer Security Version 1.2 RFC 9147 The Datagram Transport Layer Security (DTLS) Protocol Version 1.3 Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" Revision History: 2025-11-21 Clearly defined the terms TLS-PKI and TLS-PSK. 2024-03-19 Adopted the term mutual TLS in preference to client certificate authentication throughout, because the latter feeds into the ongoing certificate versus digital identity confusion. Defined the term client identity. Added the Self-Signed Certificates section. Made other minor editorial changes. 2023-02-28 Added an explanation mTLS acceptable certificate authorities. 2022-12-02 Added links to the DTLS RFCs. 2022-08-24 Added links to the TLS RFCs. Made other minor editorial changes. 2022-06-03 Added a link to TLS For Accessory Developers. 2021-02-26 Fixed the formatting. Clarified that ATS only applies to URLSession. Minor editorial changes. 2020-04-17 Updated the discussion of Subject Alternative Name to account for changes in the 2019 OS releases. Minor editorial updates. 2018-10-29 Minor editorial updates. 2016-11-11 First posted.

If I was to build an app that opened a web server at local host on a random port that resolved subdomains for local host at that port, but there was no certificate authority, signed certificate available to provide HTTPS security, would this be in violation of apples ATS policy

What is the best way to detect if the Wifi is being used for Wireless Carplay or is just a normal network interface?

All of our uses of CFSockets have started causing crashes in iOS 16. They seem to be deprecated so we are trying to transition over to using the Network framework and NWConnection to try to fix the crashes. One of our uses of them is to ping a device on the local network to make sure it is there and online and provide a heartbeat status in logs as well as put the application into a disabled state if it is not available as it is critical to the functionality of the app. I know it is discouraged to disable any functionality based on the reachability of a resource but this is in an enterprise environment where the reachability of this device is mission critical. I've seen other people ask about the ability to ping with the Network framework and the answers I've found have said that this is not possible and pointed people to the SimplePing sample code but it turns out our existing ping code is already using this technique and it is crashing just like our other CFSocket usages, inside CFSocketInvalidate with the error BUG IN CLIENT OF LIBPLATFORM: Trying to recursively lock an os_unfair_lock. Is there any updated way to perform a ping without using the CFSocket APIs that now seem to be broken/unsupported on iOS 16?

I develop a Network Extension with NEFilterDataProvider and want to understand how to stop or disable it on exit of the base app without deactivating NE from OS and leave ability to start it again without requiring a password from the user. It starts normally, but when I try to disable it: NEFilterManager.sharedManager.enabled = NO; [NEFilterManager.sharedManager saveToPreferencesWithCompletionHandler:^(NSError * _Nullable error) { // never called }]; the completion handler has never called. But stopFilterWithReason inside the NE code called by the framework where I only replay with required completionHandler();. Then NE process keeps alive. I also tried to call remove, which should disable NE: [NEFilterManager.sharedManager removeFromPreferencesWithCompletionHandler:^(NSError * _Nullable error) { // never called }]; with same result - I freeze forever on waiting completion handler. So what is the correct way to disable NE without explicit deactivation it by [OSSystemExtensionRequest deactivationRequestForExtension:...]?

Hi! I'm working on a solution (iOS 18) that uses Network Extensions PacketTunnelProvider and Content Filter. Currently I'm trying to integrate it with another extension – DNSProxyProvider. My goal is to process dns queries and use resolved ips and names for additional routing inside of the packet tunnel. I'm running into a major issue: whenever both VPN and DNS proxy are active simultaneously, the device completely loses internet connectivity — no traffic goes through, and DNS resolution seems to stop working entirely. I know about the mdm supervision requirement to use DNSProxyProvider and that's covered as I work with a managed device and install a DNS proxy profile, here's how its .mobileconfig file looks like: The DNS proxy itself works fine when working by itself (without VPN being turned on), as I implemented it that it successfully processes DNS packets flows while collecting information about domains etc, and everything works perfectly. Problems begin when using VPN at the same time. I'm aware that tunnel settings include dns related options that can affect this, but I haven't had much luck with tweaking them. Here's how they look right now for reference: let settings: NEPacketTunnelNetworkSettings = NEPacketTunnelNetworkSettings(tunnelRemoteAddress: "240.0.0.1") // let dnsSettings = NEDNSSettings(servers: "8.8.8.8,8.8.4.4".components(separatedBy: ",")) // dnsSettings.matchDomains = [""] // settings.dnsSettings = dnsSettings settings.proxySettings = nil /* ipv4 settings */ let ipv4Settings = NEIPv4Settings(addresses: ["240.0.0.2"], subnetMasks: ["255.255.255.0"]) ipv4Settings.includedRoutes = [NEIPv4Route.default()] settings.ipv4Settings = ipv4Settings /* MTU */ settings.mtu = 1500 return settings I've tried excluding some dns related ip routes and dns settings shenanigans but nothing. I haven't found any information that might suggest that using both of these extensions at the same time doesn't work, on the contrary, this page in the official documentation about the expected use of packet tunnel provider the expected use of packet tunnel provider, as it talks about the fact that you should not use it for interception of all of DNS traffic, as the use of DNSPRoxyProvider (or dns settings) are built for that, which in my mind, suggests that there should be no problem with using them both and just splitting the dns traffic handling to the proxy. Will be thankful for any help!

The path from Network Extension’s in-provider networking APIs to Network framework has been long and somewhat rocky. The most common cause of confusion is NWEndpoint, where the same name can refer to two completely different types. I’ve helped a bunch of folks with this over the years, and I’ve decided to create this post to collect together all of those titbits. If you have questions or comments, please put them in a new thread. Put it in the App & System Services > Networking subtopic and tag it with Network Extension. That way I’ll be sure to see it go by. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" NWEndpoint History and Advice A tale that spans three APIs, two languages, and ten years. The NWEndpoint type has a long and complex history, and if you’re not aware of that history you can bump into weird problems. The goal of this post is to explain the history and then offer advice on how to get around specific problems. IMPORTANT This post focuses on NWEndpoint, because that’s the type that causes the most problems, but there’s a similar situation with NWPath. The History In iOS 9 Apple introduced the Network Extension (NE) framework, which offers a convenient way for developers to create a custom VPN transport. Network Extension types all have the NE prefix. Note I’m gonna use iOS versions here, just to keep the text simple. If you’re targeting some other platform, use this handy conversion table: iOS | macOS | tvOS | watchOS | visionOS --- + ----- + ---- + ------- + -------- 9 | 10.11 | 9 | 2 | - 12 | 10.14 | 12 | 5 | - 18 | 15 | 18 | 11 | 2 At that time we also introduced in-provider networking APIs. The idea was that an NE provider could uses these Objective-C APIs to communicate with its VPN server, and thereby avoiding a bunch of ugly BSD Sockets code. The in-provider networking APIs were limited to NE providers. Specifically, the APIs to construct an in-provider connection were placed on types that were only usable within an NE provider. For example, a packet tunnel provider could create a NWTCPConnection object by calling -createTCPConnectionToEndpoint:enableTLS:TLSParameters:delegate:] and -createTCPConnectionThroughTunnelToEndpoint:enableTLS:TLSParameters:delegate:, which are both methods on NEPacketTunnelProvider. These in-provider networking APIs came with a number of ancillary types, including NWEndpoint and NWPath. At the time we thought that we might promote these in-provider networking APIs to general-purpose networking APIs. That’s why the APIs use the NW prefix. For example, it’s NWTCPConnection, not NETCPConnection. However, plans changed. In iOS 12 Apple shipped Network framework as our recommended general-purpose networking API. This actually includes two APIs: A Swift API that follows Swift conventions, for example, the connection type is called NWConnection A C API that follows C conventions, for example, the connection type is called nw_connection_t These APIs follow similar design patterns to the in-provider networking API, and thus have similar ancillary types. Specifically, there are an NWEndpoint and nw_endpoint_t types, both of which perform a similar role to the NWEndpoint type in the in-provider networking API. This was a source of some confusion in Swift, because the name NWEndpoint could refer to either the Network framework type or the Network Extension framework type, depending on what you’d included. Fortunately you could get around this by qualifying the type as either Network.NWEndpoint or NetworkExtension.NWEndpoint. The arrival of Network framework meant that it no longer made sense to promote the in-provider networking APIs to general-purposes networking APIs. The in-provider networking APIs were on the path to deprecation. However, deprecating these APIs was actually quite tricky. Network Extension framework uses these APIs in a number of interesting ways, and so deprecating them required adding replacements. In addition, we’d needed different replacements for Swift and Objective-C, because Network framework has separate APIs for Swift and C-based languages. In iOS 18 we tackled that problem head on. To continue the NWTCPConnection example above, we replaced: -createTCPConnectionToEndpoint:enableTLS:TLSParameters:delegate:] with nw_connection_t -createTCPConnectionThroughTunnelToEndpoint:enableTLS:TLSParameters:delegate: with nw_connection_t combined with a new virtualInterface property on NEPacketTunnelProvider Of course that’s the Objective-C side of things. In Swift, the replacement is NWConnection rather than nw_connection_t, and the type of the virtualInterface property is NWInterface rather than nw_interface_t. But that’s not the full story. For the two types that use the same name in both frameworks, NWEndpoint and NWPath, we decided to use this opportunity to sort out that confusion. To see how we did that, check out the <NetworkExtension/NetworkExtension.apinotes> file in the SDK. Focusing on NWEndpoint for the moment, you’ll find two entries: … - Name: NWEndpoint SwiftPrivate: true … SwiftVersions: - Version: 5.0 … - Name: NWEndpoint SwiftPrivate: false … The first entry applies when you’re building with the Swift 6 language mode. This marks the type as SwiftPrivate, which means that Swift imports it as __NWEndpoint. That frees up the NWEndpoint name to refer exclusively to the Network framework type. The second entry applies when you’re building with the Swift 5 language mode. It marks the type as not SwiftPrivate. This is a compatible measure to ensure that code written for Swift 5 continues to build. The Advice This sections discusses specific cases in this transition. NWEndpoint and NWPath In Swift 5 language mode, NWEndpoint and NWPath might refer to either framework, depending on what you’ve imported. Add a qualifier if there’s any ambiguity, for example, Network.NWEndpoint or NetworkExtension.NWEndpoint. In Swift 6 language mode, NWEndpoint and NWPath always refer to the Network framework type. Add a __ prefix to get to the Network Extension type. For example, use NWEndpoint for the Network framework type and __NWEndpoint for the Network Extension type. Direct and Through-Tunnel TCP Connections in Swift To create a connection directly, simply create an NWConnection. This support both TCP and UDP, with or without TLS. To create a connection through the tunnel, replace code like this: let c = self.createTCPConnectionThroughTunnel(…) with code like this: let params = NWParameters.tcp params.requiredInterface = self.virtualInterface let c = NWConnection(to: …, using: params) This is for TCP but the same basic process applies to UDP. UDP and App Proxies in Swift If you’re building an app proxy, transparent proxy, or DNS proxy in Swift and need to handle UDP flows using the new API, adopt the NEAppProxyUDPFlowHandling protocol. So, replace code like this: class AppProxyProvider: NEAppProxyProvider { … override func handleNewUDPFlow(_ flow: NEAppProxyUDPFlow, initialRemoteEndpoint remoteEndpoint: NWEndpoint) -> Bool { … } } with this: class AppProxyProvider: NEAppProxyProvider, NEAppProxyUDPFlowHandling { … func handleNewUDPFlow(_ flow: NEAppProxyUDPFlow, initialRemoteFlowEndpoint remoteEndpoint: NWEndpoint) -> Bool { … } } Creating a Network Rule To create an NWHostEndpoint, replace code like this: let ep = NWHostEndpoint(hostname: "1.2.3.4", port: "12345") let r = NENetworkRule(destinationHost: ep, protocol: .TCP) with this: let ep = NWEndpoint.hostPort(host: "1.2.3.4", port: 12345) let r = NENetworkRule(destinationHostEndpoint: ep, protocol: .TCP) Note how the first label of the initialiser has changed from destinationHost to destinationHostEndpoint.

For important background information, read Extra-ordinary Networking before reading this. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" Broadcasts and Multicasts, Hints and Tips I regularly see folks struggle with broadcasts and multicasts on Apple platforms. This post is my attempt to clear up some of the confusion. This post covers both IPv4 and IPv6. There is, however, a key difference. In IPv4, broadcasts and multicasts are distinct concepts. In contrast, IPv6 doesn’t support broadcast as such; rather, it treats broadcasts as a special case of multicasts. IPv6 does have an all nodes multicast address, but it’s rarely used. Before reading this post, I suggest you familiarise yourself with IP addresses in general. A good place to start is The Fount of All Knowledge™. Service Discovery A lot of broadcast and multicast questions come from folks implementing their own service discovery protocol. I generally recommend against doing that, for the reasons outlined in the Service Discovery section of Don’t Try to Get the Device’s IP Address. There are, however, some good reasons to implement a custom service discovery protocol. For example, you might be working with an accessory that only supports this custom protocol [1]. If you must implement your own service discovery protocol, read this post and also read the advice in Don’t Try to Get the Device’s IP Address. IMPORTANT Sometimes I see folks implementing their own version of mDNS. This is almost always a mistake: If you’re using third-party tooling that includes its own mDNS implementation, it’s likely that this tooling allows you to disable that implementation and instead rely on the Bonjour support that’s built-in to all Apple platforms. If you’re doing some weird low-level thing with mDNS or DNS-SD, it’s likely that you can do that with the low-level DNS-SD API. [1] And whose firmware you can’t change! I talk more about this in Working with a Wi-Fi Accessory. API Choice Broadcasts and multicasts typically use UDP [1]. TN3151 Choosing the right networking API describes two recommended UDP APIs: Network framework BSD Sockets Our general advice is to prefer Network framework over BSD Sockets, but UDP broadcasts and multicasts are an exception to that rule. Network framework has very limited UDP broadcast support. And while it’s support for UDP multicasts is less limited, it’s still not sufficient for all UDP applications. In cases where Network framework is not sufficient, BSD Sockets is your only option. [1] It is possible to broadcast and multicast at the Ethernet level, but I almost never see questions about that. UDP Broadcasts in Network Framework Historically I’ve claimed that Network framework was useful for UDP broadcasts is very limited circumstances (for example, in the footnote on this post). I’ve since learnt that this isn’t the case. Or, more accurately, this support is so limited (r. 122924701) as to be useless in practice. For the moment, if you want to work with UDP broadcasts, your only option is BSD Sockets. UDP Multicasts in Network Framework Network framework supports UDP multicast using the NWConnectionGroup class with the NWMulticastGroup group descriptor. This support has limits. The most significant limit is that it doesn’t support broadcasts; it’s for multicasts only. Note This only relevant to IPv4. Remember that IPv6 doesn’t support broadcasts as a separate concept. There are other limitations, but I don’t have a good feel for them. I’ll update this post as I encounter issues. Local Network Privacy Some Apple platforms support local network privacy. This impacts broadcasts and multicasts in two ways: Broadcasts and multicasts require local network access, something that’s typically granted by the user. Broadcasts and multicasts are limited by a managed entitlement (except on macOS). TN3179 Understanding local network privacy has lots of additional info on this topic, including the list of platforms to which it applies. Send, Receive, and Interfaces When you broadcast or multicast, there’s a fundamental asymmetry between send and receive: You can reasonable receive datagrams on all broadcast-capable interfaces. But when you send a datagram, it has to target a specific interface. The sending behaviour is the source of many weird problems. Consider the IPv4 case. If you send a directed broadcast, you can reasonably assume it’ll be routed to the correct interface based on the network prefix. But folks commonly send an all-hosts broadcast (255.255.255.255), and it’s not obvious what happens in that case. Note If you’re unfamiliar with the terms directed broadcast and all-hosts broadcast, see IP address. The exact rules for this are complex, vary by platform, and can change over time. For that reason, it’s best to write your broadcast code to be interface specific. That is: Identify the interfaces on which you want to work. Create a socket per interface. Bind that socket to that interface. Note Use the IP_BOUND_IF (IPv4) or IPV6_BOUND_IF (IPv6) socket options rather than binding to the interface address, because the interface address can change over time. Extra-ordinary Networking has links to other posts which discuss these concepts and the specific APIs in more detail. Miscellaneous Gotchas A common cause of mysterious broadcast and multicast problems is folks who hard code BSD interface names, like en0. Doing that might work for the vast majority of users but then fail in some obscure scenarios. BSD interface names are not considered API and you must not hard code them. Extra-ordinary Networking has links to posts that describe how to enumerate the interface list and identify interfaces of a specific type. Don’t assume that there’ll be only one interface of a given type. This might seem obviously true, but it’s not. For example, our platforms support peer-to-peer Wi-Fi, so each device has multiple Wi-Fi interfaces. When sending a broadcast, don’t forget to enable the SO_BROADCAST socket option. If you’re building a sandboxed app on the Mac, working with UDP requires both the com.apple.security.network.client and com.apple.security.network.server entitlements. Some folks reach for broadcasts or multicasts because they’re sending the same content to multiple devices and they believe that it’ll be faster than unicasts. That’s not true in many cases, especially on Wi-Fi. For more on this, see the Broadcasts section of Wi-Fi Fundamentals. Snippets To send a UDP broadcast: func broadcast(message: Data, to interfaceName: String) throws { let fd = try FileDescriptor.socket(AF_INET, SOCK_DGRAM, 0) defer { try! fd.close() } try fd.setSocketOption(SOL_SOCKET, SO_BROADCAST, 1 as CInt) let interfaceIndex = if_nametoindex(interfaceName) guard interfaceIndex > 0 else { throw … } try fd.setSocketOption(IPPROTO_IP, IP_BOUND_IF, interfaceIndex) try fd.send(data: message, to: ("255.255.255.255", 2222)) } Note These snippet uses the helpers from Calling BSD Sockets from Swift. To receive UDP broadcasts: func receiveBroadcasts(from interfaceName: String) throws { let fd = try FileDescriptor.socket(AF_INET, SOCK_DGRAM, 0) defer { try! fd.close() } let interfaceIndex = if_nametoindex(interfaceName) guard interfaceIndex > 0 else { fatalError() } try fd.setSocketOption(IPPROTO_IP, IP_BOUND_IF, interfaceIndex) try fd.setSocketOption(SOL_SOCKET, SO_REUSEADDR, 1 as CInt) try fd.setSocketOption(SOL_SOCKET, SO_REUSEPORT, 1 as CInt) try fd.bind("0.0.0.0", 2222) while true { let (data, (sender, port)) = try fd.receiveFrom() … } } IMPORTANT This code runs synchronously, which is less than ideal. In a real app you’d run the receive asynchronously, for example, using a Dispatch read source. For an example of how to do that, see this post. If you need similar snippets for multicast, lemme know. I’ve got them lurking on my hard disk somewhere (-: Other Resources Apple’s official documentation for BSD Sockets is in the man pages. See Reading UNIX Manual Pages. Of particular interest are: setsockopt man page ip man page ip6 man page If you’re not familiar with BSD Sockets, I strongly recommend that you consult third-party documentation for it. BSD Sockets is one of those APIs that looks simple but, in reality, is ridiculously complicated. That’s especially true if you’re trying to write code that works on BSD-based platforms, like all of Apple’s platforms, and non-BSD-based platforms, like Linux. I specifically recommend UNIX Network Programming, by Stevens et al, but there are lots of good alternatives. https://unpbook.com Revision History 2025-09-01 Fixed a broken link. 2025-01-16 First posted.

I've been able to run this sample project with the PIRServer. But the urls are still not blocked. https://developer.apple.com/documentation/networkextension/filtering-traffic-by-url https://github.com/apple/pir-service-example I got this on the log Received filter status change: <FilterStatus: 'running'>

This issue has cropped up many times here on DevForums. Someone recently opened a DTS tech support incident about it, and I used that as an opportunity to post a definitive response here. If you have questions or comments about this, start a new thread and tag it with Network so that I see it. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" iOS Network Signal Strength The iOS SDK has no general-purpose API that returns Wi-Fi or cellular signal strength in real time. Given that this has been the case for more than 10 years, it’s safe to assume that it’s not an accidental omission but a deliberate design choice. For information about the Wi-Fi APIs that are available on iOS, see TN3111 iOS Wi-Fi API overview. Network performance Most folks who ask about this are trying to use the signal strength to estimate network performance. This is a technique that I specifically recommend against. That’s because it produces both false positives and false negatives: The network signal might be weak and yet your app has excellent connectivity. For example, an iOS device on stage at WWDC might have terrible WWAN and Wi-Fi signal but that doesn’t matter because it’s connected to the Ethernet. The network signal might be strong and yet your app has very poor connectivity. For example, if you’re on a train, Wi-Fi signal might be strong in each carriage but the overall connection to the Internet is poor because it’s provided by a single over-stretched WWAN. The only good way to determine whether connectivity is good is to run a network request and see how it performs. If you’re issuing a lot of requests, use the performance of those requests to build a running estimate of how well the network is doing. Indeed, Apple practices what we preach here: This is exactly how HTTP Live Streaming works. Remember that network performance can change from moment to moment. The user’s train might enter or leave a tunnel, the user might step into a lift, and so on. If you build code to estimate the network performance, make sure it reacts to such changes. Keeping all of the above in mind, iOS 26 beta has two new APIs related to this issue: Network framework now offers a linkQuality property. See this post for my take on how to use this effectively. The WirelessInsights framework can notify you of anticipated WWAN condition changes. But what about this code I found on the ’net? Over the years various folks have used various unsupported techniques to get around this limitation. If you find code on the ’net that, say, uses KVC to read undocumented properties, or grovels through system logs, or walks the view hierarchy of the status bar, don’t use it. Such techniques are unsupported and, assuming they haven’t broken yet, are likely to break in the future. But what about Hotspot Helper? Hotspot Helper does have an API to read Wi-Fi signal strength, namely, the signalStrength property. However, this is not a general-purpose API. Like the rest of Hotspot Helper, this is tied to the specific use case for which it was designed. This value only updates in real time for networks that your hotspot helper is managing, as indicated by the isChosenHelper property. But what about MetricKit? MetricKit is so cool. Amongst other things, it supports the MXCellularConditionMetric payload, which holds a summary of the cellular conditions while your app was running. However, this is not a real-time signal strength value. But what if I’m working for a carrier? This post is about APIs in the iOS SDK. If you’re working for a carrier, discuss your requirements with your carrier’s contact at Apple. Revision History 2025-07-02 Updated to cover new features in the iOS 16 beta. Made other minor editorial changes. 2022-12-01 First posted.

I want to add more cipher suites. I use NWConnection to make a connection. Before I use sec_protocol_options_append_tls_ciphersuite method to add more cipher suites, I found that Apple provided 20 cipher suites shown in the client hello packet. But after I added three more cipher suites, I found that nothing changed, and still original 20 cipher suites shown in the client hello packet when I made a new connection. The following is the code about connection. I want to add three more cipher suites: tls_ciphersuite_t.ECDHE_ECDSA_WITH_AES_128_CBC_SHA256, tls_ciphersuite_t.ECDHE_ECDSA_WITH_AES_256_CBC_SHA384, tls_ciphersuite_t.ECDHE_RSA_WITH_AES_256_CBC_SHA384 Can you give me some advice about how to add more cipher suites? Thanks. By the way, I working on a MacOS app. Xcode version: 16 MacOS version: 15.6

I'm building a HomeKit app that discovers Thread devices and visualizes the mesh topology. I can detect device roles (Router vs End Device via characteristic 0x0703) and identify Border Routers (via _meshcop._udp), but I cannot determine which Router is the parent of a given End Device. Any Thread device can act as a Router (a Nanoleaf bulb, an Eve plug, not just HomePods), and End Devices attach to these Routers as children. That parent-child relationship is what I'm trying to map, but there's no RLOC16, neighbor table, or parent identifier exposed through any available API. I've tested every path I can find. Here's what I've tried on a network with 44 Thread devices and 6 Border Routers: What works (partially) HAP Thread Management Service (0x0701) gives me the device role from characteristic 0x0703, the OpenThread version from 0x0706, and node capabilities from 0x0702. That's the complete set of characteristics on that service. None of them contain RLOC16, parent Router, or neighbor data. This service also only exists on HAP-native Thread devices. My 20 Matter-over-Thread devices (Aqara, Eve Door, SmartWings, Onvis S4) don't have it at all. MeshCoP Bonjour (_meshcop._udp) identifies Border Routers and the network name/Extended PAN ID. No topology data about other mesh nodes. What doesn't work ThreadNetwork framework (THClient) - retrieveAllCredentials() returns error Code 3 because the app can't access credentials stored by Apple Home. Even if it worked, THCredentials only contains network config (name, PAN ID, channel), not topology. Direct CoAP queries - Border Routers don't route traffic from WiFi to Thread management ports. Mesh-local addresses aren't reachable. No Thread NWInterface in Network.framework. Network.framework - No visibility into the Thread mesh from the WiFi side. The only remaining path I can see (but it's not practical) Matter cluster 0x0035 (Thread Network Diagnostics) appears to have exactly what I need: RLOC16, NeighborTable with isChild boolean, RouteTable. I haven't implemented this because it requires commissioning each device individually onto my app's own Matter fabric via Multi-Admin. That's 21 separate user-initiated pairing actions on my network. I can't ask end users to do that. The core issue Every Thread Router (whether it's a HomePod acting as a Border Router or a Nanoleaf bulb acting as a mesh Router) knows its own children and neighbors. The Border Routers also maintain route tables covering the mesh backbone. This data exists on the user's own devices but none of it is exposed to third-party apps. Even something minimal would help. HMAccessory already exposes matterNodeID as a cross-protocol identifier. Exposing RLOC16 the same way would be enough, since parent-child relationships are encoded in the address itself (ParentRLOC = ChildRLOC & 0xFC00). Has anyone found another approach I'm missing? Thanks in advance for any pointers.

We are using the [NEHotspotHelper supportedNetworkInterfaces] to get the Wi-Fi interface in our app, but it occasionally crashes on some devices with the following stack trace: 0 CaptiveNetwork 0x0000000221d87a4c ServerConnectionGetHandlerQueue + 0 (ServerConnection.c:509) 1 CaptiveNetwork 0x0000000221d8577c CNPluginCopySupportedInterfaces + 180 (CNPlugin.c:457) 2 NetworkExtension 0x00000001b0446618 +[NEHotspotHelper supportedNetworkInterfaces] + 32 (NEHotspotHelper.m:563) It seems like the crash is happening on apple's api of supportedNetworkInterfaces. We would like to understand the cause of the crash.

Hi folks, I'm building an iOS companion app to a local hosted server app (hosted on 0.0.0.0). The MacOS app locally connects to this server hosted, and I took the approach of advertising the server using a Daemon and BonjourwithTXT(for port) and then net service to resolve a local name. Unfortunately if there's not enough time given after the iPhone/iPad is plugged in (usb or ethernet), the app will cycle through attempts and disconnects many times before connecting and I'm trying to find a way to only connect when a viable en interface is available. I've run into a weird thing in which the en interface only becomes seen on the NWMonitor after multiple connection attempts have been made and failed. If I screen for en before connecting it simply never appears. Is there any way to handle this such that my app can intelligently wait for an en connection before trying to connect? Attaching my code although I have tried a few other setups but none has been perfect. func startMonitoringAndBrowse() { DebugLogger.shared.append("Starting Bonjour + Ethernet monitoring") if !browserStarted { let params = NWParameters.tcp params.includePeerToPeer = false params.requiredInterfaceType = .wiredEthernet browser = NWBrowser(for: .bonjourWithTXTRecord(type: "_mytcpapp._tcp", domain: nil), using: params) browser?.stateUpdateHandler = { state in if case .ready = state { DebugLogger.shared.append("Bonjour browser ready.") } } browser?.browseResultsChangedHandler = { results, _ in self.handleBrowseResults(results) } browser?.start(queue: .main) browserStarted = true } // Start monitoring for wired ethernet monitor = NWPathMonitor() monitor?.pathUpdateHandler = { path in let hasEthernet = path.availableInterfaces.contains { $0.type == .wiredEthernet } let ethernetInUse = path.usesInterfaceType(.wiredEthernet) DebugLogger.shared.append(""" NWPathMonitor: - Status: \(path.status) - Interfaces: \(path.availableInterfaces.map { "\($0.name)[\($0.type)]" }.joined(separator: ", ")) - Wired Ethernet: \(hasEthernet), In Use: \(ethernetInUse) """) self.tryToConnectIfReady() self.stopMonitoring() } monitor?.start(queue: monitorQueue) } // MARK: - Internal Logic private func handleBrowseResults(_ results: Set&lt;NWBrowser.Result&gt;) { guard !self.isResolving, !self.hasResolvedService else { return } for result in results { guard case let .bonjour(txtRecord) = result.metadata, let portString = txtRecord["actual_port"], let actualPort = Int(portString), case let .service(name, type, domain, _) = result.endpoint else { continue } DebugLogger.shared.append("Bonjour result — port: \(actualPort)") self.resolvedPort = actualPort self.isResolving = true self.resolveWithNetService(name: name, type: type, domain: domain) break } } private func resolveWithNetService(name: String, type: String, domain: String) { let netService = NetService(domain: domain, type: type, name: name) netService.delegate = self netService.includesPeerToPeer = false netService.resolve(withTimeout: 5.0) resolvingNetService = netService DebugLogger.shared.append("Resolving NetService: \(name).\(type)\(domain)") } private func tryToConnectIfReady() { guard hasResolvedService, let host = resolvedHost, let port = resolvedPort else { return } DebugLogger.shared.append("Attempting to connect: \(host):\(port)") discoveredIP = host discoveredPort = port connectionPublisher.send(.connecting(ip: host, port: port)) stopBrowsing() socketManager.connectToServer(ip: host, port: port) hasResolvedService = false } } // MARK: - NetServiceDelegate extension BonjourManager: NetServiceDelegate { func netServiceDidResolveAddress(_ sender: NetService) { guard let hostname = sender.hostName else { DebugLogger.shared.append("Resolved service with no hostname") return } DebugLogger.shared.append("Resolved NetService hostname: \(hostname)") resolvedHost = hostname isResolving = false hasResolvedService = true tryToConnectIfReady() } func netService(_ sender: NetService, didNotResolve errorDict: [String : NSNumber]) { DebugLogger.shared.append("NetService failed to resolve: \(errorDict)") } }

This is just an FYI in case someone else runs into this problem. This afternoon (12 Dec 2025), I updated to macOS 26.2 and lost my network. The System Settings' Wi-Fi light was green and said it was connected, but traceroute showed "No route to host". I turned Wi-Fi on & off. I rebooted the Mac. I rebooted the eero network. I switched to tethering to my iPhone. I switched to physical ethernet cable. Nothing worked. Then I remembered I had a beta of an app with a network system extension that was distributed through TestFlight. I deleted the app, and networking came right back. I had this same problem ~2 years ago. Same story: app with network system extension + TestFlight + macOS update = lost network. (My TestFlight build might have expired, but I'm not certain) I don't know if anyone else has had this problem, but I thought I'd share this in case it helps.

For our outdoor power supply company that builds public WiFi networks at camping sites, we want to implement the following features in our app: Scan surrounding WiFi networks When detecting specific public WiFi SSIDs, provide users with corresponding passwords Automatically connect to those WiFi networks Regarding the NEHotspotHelper API permission application, when I clicked on https://developer.apple.com/contact/request/network-extension, it redirected me to https://developer.apple.com/unauthorized/. I'm not sure where to properly apply for this permission now.