On iOS 18.3, I noted that partition "HTTPCookiePropertyKey: StoragePartition" is not observed to be set for cookies returned from the wkwebview cookie store. Now on 18.4 beta 4 we are now seeing those same cookies are populated with a partition property. Is there documentation for this change? Is it intended to be suddenly populated in 18.4? Now that partition property is set, HTTPCookieStorage.shared.cookies(for: serverUri) doesn't seem to return the expected cookies correctly. For context, we are using the cookies extracted from wkwebview, setting them in HTTPCookieStorage.shared and using URLSession to make network calls outside the webivew. Works fine once I forcefully set partition on the cookie to nil. More details on what the cookie looks like here: https://feedbackassistant.apple.com/feedback/16906526 Hopefully this is on your radar?

Apology for repost. I needed to fix the tags for original thread. https://developer.apple.com/forums/thread/777159 On iOS 18.3, I noted that partition "HTTPCookiePropertyKey: StoragePartition" is not observed to be set for cookies returned from the wkwebview cookie store. Now on 18.4 beta 4 we are now seeing those same cookies are populated with a partition property. Is there documentation for this change? Is it intended to be suddenly populated in 18.4? Now that partition property is set, HTTPCookieStorage.shared.cookies(for: serverUri) doesn't seem to return the expected cookies correctly. For context, we are using the cookies extracted from wkwebview, setting them in HTTPCookieStorage.shared and using URLSession to make network calls outside the webivew. Works fine once I forcefully set partition on the cookie to nil. More details on what the cookie looks like here: https://feedbackassistant.apple.com/feedback/16906526 Hopefully this is on your radar?

When I make a local network HTTP request, an error occurs. I'm sure I've granted wireless data permissions and local network permissions, and I'm connected to the correct Wi-Fi. This problem is intermittent, but once it happens, it will keep happening, and the only way to fix it is to restart the phone. Here is the error log: sessionTaskFailed(error: Error Domain=NSURLErrorDomain Code=-1009 "似乎已断开与互联网的连接。" UserInfo={_kCFStreamErrorCodeKey=50, NSUnderlyingError=0x30398a5b0 {Error Domain=kCFErrorDomainCFNetwork Code=-1009 "(null)" UserInfo={_NSURLErrorNWPathKey=unsatisfied (Local network prohibited), interface: en0[802.11], uses wifi, _kCFStreamErrorCodeKey=50, _kCFStreamErrorDomainKey=1}}, _NSURLErrorFailingURLSessionTaskErrorKey=LocalDataTask .<63>, _NSURLErrorRelatedURLSessionTaskErrorKey=( "LocalDataTask .<63>" ), NSLocalizedDescription=似乎已断开与互联网的连接。, NSErrorFailingURLStringKey=http://192.168.2.1:80/v1/parameters, NSErrorFailingURLKey=http://192.168.2.1:80/v1/parameters, _kCFStreamErrorDomainKey=1})

Hi there, can some one help how to debug this crashes? where I can start to find root causes of this crashes. I've got lot of these NSInvalidArgumentException crashes in myapp last version I have no idea how to reproduce these issues since it doesn't point to any specific code on myapp, so I don't know how to start Fatal Exception: NSInvalidArgumentException -[NWConcrete_nw_protocol_options copyWithZone:]: unrecognized selector sent to instance 0x283391d60 Fatal Exception: NSInvalidArgumentException -[NSConcreteHashTable lengthOfBytesUsingEncoding:]: unrecognized selector sent to instance 0x281d4cbe0 Fatal Exception: NSInvalidArgumentException -[_NSXPCConnectionExportedObjectTable lengthOfBytesUsingEncoding:]: unrecognized selector sent to instance 0x2829d11d0 Fatal Exception: NSInvalidArgumentException -[OS_dispatch_group lengthOfBytesUsingEncoding:]: unrecognized selector sent to instance 0x281a11900 Fatal Exception: NSInvalidArgumentException -[__NSCFData getBytes:maxLength:usedLength:encoding:options:range:remainingRange:]: unrecognized selector sent to instance 0x28210e440 Fatal Exception: NSInvalidArgumentException -[_NSCoreTypesetterLayoutCache copyWithZone:]: unrecognized selector sent to instance 0x283bbc730 Thanks com.kitabisa.ios_issue_dd3c71c96cddb5bb99874640746439d6_crash_session_de9bb41c2b7e43fa9ccfc42e0f649aa3_DNE_0_v2_stacktrace.txt

The newly introduced enum value NEProviderStopReasonInternalError (macOS 15.1) is not documented (assuming being documented means having at least a sentence describing the enum value). [Q] What kind of situation is the NEProviderStopReasonInternalError enum value supposed to describe? An internal error that requires to try to restart the provider? A fatal error that requires to reinstall macOS? A fatal error that requires to purchase a new Mac? Something less serious but with a human friendly description in the headers (I'm using Xcode 16.2) and online documentation.

I'm simply trying to use a proxy to route a http request in Swift. I've tried using a URLSession Delegate but that results in the same issue with the iOS menu. proxy format: host:port:username:password When I run the code below I am prompted with a menu to add credentials for the proxy. I closed this menu inside my app and tried the function below again and it worked without giving me the menu a second time. However even though the function works without throwing any errors, it does NOT use the proxies to route the request. I've spent days on this and the only solution I found was using a NWConnection but this is super low level and now I need a shared session to manage cookies. If you want to see the NWConnection solution I made its here func averageProxyGroupSpeed(proxies: [String], completion: @escaping (Int, String) -> Void) { let numProxies = proxies.count if numProxies == 0 { completion(0, "No proxies") return } var totalTime: Int64 = 0 var successCount = 0 let group = DispatchGroup() let queue = DispatchQueue(label: "proxyQueue", attributes: .concurrent) let lock = NSLock() let shuffledProxies = proxies.shuffled() let selectedProxies = Array(shuffledProxies.prefix(25)) for proxy in selectedProxies { group.enter() queue.async { let proxyDetails = proxy.split(separator: ":").map(String.init) guard proxyDetails.count == 4, let port = Int(proxyDetails[1]), let url = URL(string: "http://httpbin.org/get") else { completion(0, "Invalid proxy format") group.leave() return } var request = URLRequest(url: url) request.timeoutInterval = 15 let configuration = URLSessionConfiguration.default configuration.connectionProxyDictionary = [ AnyHashable("HTTPEnable"): true, AnyHashable("HTTPProxy"): proxyDetails[0], AnyHashable("HTTPPort"): port, AnyHashable("HTTPSEnable"): false, AnyHashable("HTTPUser"): proxyDetails[2], AnyHashable("HTTPPassword"): proxyDetails[3] ] let session = URLSession(configuration: configuration) let start = Date() let task = session.dataTask(with: request) { _, _, error in defer { group.leave() } if let error = error { print("Error: \(error.localizedDescription)") } else { let duration = Date().timeIntervalSince(start) * 1000 lock.lock() totalTime += Int64(duration) successCount += 1 lock.unlock() } } task.resume() } } group.notify(queue: DispatchQueue.main) { if successCount == 0 { completion(0, "Proxies Failed") } else { let averageTime = Int(Double(totalTime) / Double(successCount)) completion(averageTime, "") } } } Delegate example class ProxySessionDelegate: NSObject, URLSessionDelegate { let username: String let password: String init(username: String, password: String) { self.username = username self.password = password } func urlSession(_ session: URLSession, task: URLSessionTask, didReceive challenge: URLAuthenticationChallenge, completionHandler: @escaping (URLSession.AuthChallengeDisposition, URLCredential?) -> Void) { if challenge.protectionSpace.authenticationMethod == NSURLAuthenticationMethodHTTPBasic { let credential = URLCredential(user: self.username, password: self.password, persistence: .forSession) completionHandler(.useCredential, credential) } else { completionHandler(.performDefaultHandling, nil) } } }

I am trying to convert a simple URLSession request in Swift to using NWConnection. This is because I want to make the request using a Proxy that requires Authentication. I posted this SO Question about using a proxy with URLSession. Unfortunately no one answered it but I found a fix by using NWConnection instead. Working Request func updateOrderStatus(completion: @escaping (Bool) -> Void) { let orderLink = "https://shop.ccs.com/51913883831/orders/f3ef2745f2b06c6b410e2aa8a6135847" guard let url = URL(string: orderLink) else { completion(true) return } let cookieStorage = HTTPCookieStorage.shared let config = URLSessionConfiguration.default config.httpCookieStorage = cookieStorage config.httpCookieAcceptPolicy = .always let session = URLSession(configuration: config) var request = URLRequest(url: url) request.httpMethod = "GET" request.setValue("text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8", forHTTPHeaderField: "Accept") request.setValue("none", forHTTPHeaderField: "Sec-Fetch-Site") request.setValue("navigate", forHTTPHeaderField: "Sec-Fetch-Mode") request.setValue("Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/605.1.15 (KHTML, like Gecko) Version/18.0.1 Safari/605.1.15", forHTTPHeaderField: "User-Agent") request.setValue("en-US,en;q=0.9", forHTTPHeaderField: "Accept-Language") request.setValue("gzip, deflate, br", forHTTPHeaderField: "Accept-Encoding") request.setValue("document", forHTTPHeaderField: "Sec-Fetch-Dest") request.setValue("u=0, i", forHTTPHeaderField: "Priority") // make the request } Attempted Conversion func updateOrderStatusProxy(completion: @escaping (Bool) -> Void) { let orderLink = "https://shop.ccs.com/51913883831/orders/f3ef2745f2b06c6b410e2aa8a6135847" guard let url = URL(string: orderLink) else { completion(true) return } let proxy = "resi.wealthproxies.com:8000:akzaidan:x0if46jo-country-US-session-7cz6bpzy-duration-60" let proxyDetails = proxy.split(separator: ":").map(String.init) guard proxyDetails.count == 4, let port = UInt16(proxyDetails[1]) else { print("Invalid proxy format") completion(false) return } let proxyEndpoint = NWEndpoint.hostPort(host: .init(proxyDetails[0]), port: NWEndpoint.Port(integerLiteral: port)) let proxyConfig = ProxyConfiguration(httpCONNECTProxy: proxyEndpoint, tlsOptions: nil) proxyConfig.applyCredential(username: proxyDetails[2], password: proxyDetails[3]) let parameters = NWParameters.tcp let privacyContext = NWParameters.PrivacyContext(description: "ProxyConfig") privacyContext.proxyConfigurations = [proxyConfig] parameters.setPrivacyContext(privacyContext) let host = url.host ?? "" let path = url.path.isEmpty ? "/" : url.path let query = url.query ?? "" let fullPath = query.isEmpty ? path : "\(path)?\(query)" let connection = NWConnection( to: .hostPort( host: .init(host), port: .init(integerLiteral: UInt16(url.port ?? 80)) ), using: parameters ) connection.stateUpdateHandler = { state in switch state { case .ready: print("Connected to proxy: \(proxyDetails[0])") let httpRequest = """ GET \(fullPath) HTTP/1.1\r Host: \(host)\r Connection: close\r Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8\r User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/605.1.15 (KHTML, like Gecko) Version/18.0.1 Safari/605.1.15\r Accept-Language: en-US,en;q=0.9\r Accept-Encoding: gzip, deflate, br\r Sec-Fetch-Dest: document\r Sec-Fetch-Mode: navigate\r Sec-Fetch-Site: none\r Priority: u=0, i\r \r """ connection.send(content: httpRequest.data(using: .utf8), completion: .contentProcessed({ error in if let error = error { print("Failed to send request: \(error)") completion(false) return } // Read data until the connection is complete self.readAllData(connection: connection) { finalData, readError in if let readError = readError { print("Failed to receive response: \(readError)") completion(false) return } guard let data = finalData else { print("No data received or unable to read data.") completion(false) return } if let body = String(data: data, encoding: .utf8) { print("Received \(data.count) bytes") print("\n\nBody is \(body)") completion(true) } else { print("Unable to decode response body.") completion(false) } } })) case .failed(let error): print("Connection failed for proxy \(proxyDetails[0]): \(error)") completion(false) case .cancelled: print("Connection cancelled for proxy \(proxyDetails[0])") completion(false) case .waiting(let error): print("Connection waiting for proxy \(proxyDetails[0]): \(error)") completion(false) default: break } } connection.start(queue: .global()) } private func readAllData(connection: NWConnection, accumulatedData: Data = Data(), completion: @escaping (Data?, Error?) -> Void) { connection.receive(minimumIncompleteLength: 1, maximumLength: 65536) { data, context, isComplete, error in if let error = error { completion(nil, error) return } // Append newly received data to what's been accumulated so far let newAccumulatedData = accumulatedData + (data ?? Data()) if isComplete { // If isComplete is true, the server closed the connection or ended the stream completion(newAccumulatedData, nil) } else { // Still more data to read, so keep calling receive self.readAllData(connection: connection, accumulatedData: newAccumulatedData, completion: completion) } } }

Problem Description When using iCloud Private Relay (Limit IP address tracking) on macOS Sonoma, I'm experiencing a DNS resolving issue when simultaneously connected via OpenVPN. The system activates iCloud Private Relay instead of using the DNS servers provided by the VPN connection, resulting in incorrect IP address resolution. Specific issues: When connected to my company VPN, the system ignores DNS servers set by the VPN connection When attempting to ping internal servers in the corporate network, I receive public IP addresses instead of internal corporate IP addresses These public IP addresses are not accessible from outside as some services are disabled for external access Tools like nslookup and dig correctly resolve internal addresses, but ping and regular applications use incorrect (public) IP addresses Access to local servers in the corporate network/subnet is problematic Expected Behavior I need the system to: Use DNS servers provided by the VPN connection for accessing internal corporate resources when connected via VPN Simultaneously maintain iCloud Private Relay protection for regular internet browsing while connected to VPN Technical Details Based on available information, the problem is likely caused by "iCloud Private Relay" inserting an additional DNS resolver that isn't visible through the scutil tool. Regular applications use macOS internal API for DNS resolving, while tools like dig and nslookup work differently. According to Apple documentation, it should be possible to use custom DNS settings with iCloud Private Relay, but it doesn't seem to work properly with OpenVPN. Temporary Solutions I've Tried Some sources suggest: Disabling iCloud Private Relay (I don't want to lose privacy protection) Creating an /etc/resolver directory with configuration for specific domains Manually adding static routes for specific IP addresses None of these solutions provide the ideal combination of VPN DNS functionality and privacy protection. Request for Solution Please implement a solution that allows: Prioritizing DNS servers provided by VPN connection for internal domains Maintaining iCloud Private Relay protection for other communications Ensuring consistent behavior of all applications during DNS resolving Thank you for your help.

It doesn’t seem like there’s any high level, first-party documentation on how to use what is the recommended API for executing networking logic that you otherwise wouldn’t use URLSession for; which is a lot of things. There’s a sample app, and docs on how to choose the right network API in general, but apparently no high level API docs for Network.framework itself. Am I missing something? How do people learn to use this? Know which classes to use? Know the various ways it can be configured?

Hello, I'm having some problems starting my DNS proxy network extension. Even after I call NEDNSProxyManager.saveToPreference() successfully I don't see any logs from my dns proxy. This is the code from the user space app: import SwiftUI import NetworkExtension func configureDNSProxy() { let dnsProxyManager = NEDNSProxyManager.shared() dnsProxyManager.loadFromPreferences { error in if let error = error { print("Error loading DNS proxy preferences: \(error)") return } dnsProxyManager.localizedDescription = "my DNS proxy" let proto = NEDNSProxyProviderProtocol() proto.providerBundleIdentifier = "com.myteam.dns-proxy-tests.ne" dnsProxyManager.providerProtocol = proto // Enable the DNS proxy. dnsProxyManager.isEnabled = true dnsProxyManager.saveToPreferences { error in if let error = error { print("Error saving DNS proxy preferences: \(error)") } else { NSLog("DNS Proxy enabled successfully") } } } } @main struct dns_proxy_testsApp: App { var body: some Scene { WindowGroup { ContentView() } } init() { configureDNSProxy() } } This is the code for my network extension(DNSProxyProvider.swift): import NetworkExtension class DNSProxyProvider: NEDNSProxyProvider { override func startProxy(options:[String: Any]? = nil, completionHandler: @escaping (Error?) -> Void) { NSLog("dns proxy ne started") completionHandler(nil) } override func stopProxy(with reason: NEProviderStopReason, completionHandler: @escaping () -> Void) { NSLog("dns proxy ne stopped") completionHandler() } override func sleep(completionHandler: @escaping () -> Void) { NSLog("dns proxy ne sleep") completionHandler() } override func wake() { NSLog("dns proxy ne wake") } override func handleNewFlow(_ flow: NEAppProxyFlow) -> Bool { NSLog("dns proxy ne flow") return true } } The bundle identifier for my network extension is: com.myteam.dns-proxy-tests.ne and both the user space app and the network extension have the DNS Proxy capability. Both have the same app group capability with the same group name group.com.myteam.dns-proxy-test. The info.plist from the network extension look like this(I didn't really modify it from the default template created by xcode) <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>NetworkExtension</key> <dict> <key>NEMachServiceName</key> <string>$(TeamIdentifierPrefix)com.example.app-group.MySystemExtension</string> <key>NEProviderClasses</key> <dict> <key>com.apple.networkextension.dns-proxy</key> <string>$(PRODUCT_MODULE_NAME).DNSProxyProvider</string> </dict> </dict> </dict> </plist> In the logs I do see DNS Proxy enabled successfully and also I see: NESMDNSProxySession[Primary Tunnel:my DNS proxy:<...>:(null)] starting with configuration: { name = my DNS proxy identifier = <..> applicationName = dns-proxy-tests application = com.myteam.dns-proxy-tests grade = 1 dnsProxy = { enabled = YES protocol = { type = dnsProxy identifier = <...> identityDataImported = NO disconnectOnSleep = NO disconnectOnIdle = NO disconnectOnIdleTimeout = 0 disconnectOnWake = NO disconnectOnWakeTimeout = 0 disconnectOnUserSwitch = NO disconnectOnLogout = NO includeAllNetworks = NO excludeLocalNetworks = NO excludeCellularServices = YES excludeAPNs = YES excludeDeviceCommunication = YES enforceRoutes = NO pluginType = com.myteam.dns-proxy-tests providerBundleIdentifier = com.myteam.dns-proxy-tests.ne designatedRequirement = identifier "com.myteam.dns-proxy-tests.ne" <...> /* exists */ } } } But then I see: Checking for com.myteam.dns-proxy-tests.ne - com.apple.networkextension.dns-proxy But then finally Found 0 registrations for com.myteam.dns-proxy-tests.ne (com.apple.networkextension.dns-proxy) So I think that last log probably indicates the problem. I'm a bit lost at what I'm doing wrong so I'd be super thankful for any pointer!

We’re looking to implement a custom IPSec IKEv2 VPN using the Packet Tunnel Provider network extension on iOS because we need to add extra information to EAP, which the built-in IKEv2 VPN configuration does not support. Is it possible to handle the full IKEv2 negotiation and IPSec tunneling within the Packet Tunnel Provider extension? Or are there limitations that would prevent implementing a full IKEv2 stack this way? Any insights or alternative approaches would be appreciated. Thanks!

Hi, I saw that almost each OS version, on ios and macos, handles differently changing includeAllNetworks while the tunnel is running. On some the entire OS reports no-net, while others, specially latest versions, handle this fine. Can includeAllNetworks be changed while the tunnel is running, or the tunnel must be stopped and restarted with the new value? e.g. the tunnel is started with it set to false, but later is changed to true into VPN profile. And on the same note, regarding setTunnelNetworkSettings, can this be called multiple times while the tunnel is running? For example if the VPN server IP changes. Because what I've saw each call to setTunnelNetworkSettings after VPN connected results in at least DNS leaks, because the routing table is recreated. Let me know if it is easier to track to create separate questions. Thanks

We are developers of an app, we found that there's no LN prompt for users to install the app for the 1st time on ios18. We used the following method to prompt the "allow/not allow" alert: // Attempts to trigger the local network privacy alert. /// /// This builds a list of link-local IPv6 addresses and then creates a connected /// UDP socket to each in turn. Connecting a UDP socket triggers the local /// network alert without actually sending any traffic. /// /// This is a ‘best effort’ approach, and it handles errors by ignoring them. /// There’s no guarantee that it’ll actually trigger the alert (FB8711182). func triggerLocalNetworkPrivacyAlert() { let addresses = selectedLinkLocalIPv6Addresses() for address in addresses { let sock6 = socket(AF_INET6, SOCK_DGRAM, 0) guard sock6 >= 0 else { return } defer { close(sock6) } withUnsafePointer(to: address) { sa6 in sa6.withMemoryRebound(to: sockaddr.self, capacity: 1) { sa in _ = connect(sock6, sa, socklen_t(sa.pointee.sa_len)) >= 0 } } } }

Hi everyone, I'm currently working on a project where I need to send multicast packets across all available network interfaces using Apple Network Framework's NWConnectionGroup. Specifically, the MacBook (device I am using for sending multicast requests, MacOS: 15.1) is connected to two networks: Wi-Fi (Network 1) and Ethernet (Network 2), and I need to send multicast requests over both interfaces. I tried using the .requiredInterface property as suggested by Eskimo in this post, but I’m running into issues. It seems like I can't create an NWInterface object because it doesn't have any initializers. Here is the code which I wrote: var multicast_group_descriptor : NWMulticastGroup var multicast_endpoint : NWEndpoint multicast_endpoint = NWEndpoint.hostPort(host: NWEndpoint.Host("234.0.0.1"), port: NWEndpoint.Port(rawValue: 49154)!) var connection_group : NWConnectionGroup var multicast_params : NWParameters multicast_params = NWParameters.udp var interface = NWInterface(NWInterface.InterfaceType.wiredEthernet) I get following error: 'NWInterface' cannot be constructed because it has no accessible initializers I also experimented with the .requiredInterfaceType property. Even when I set it to .wiredEthernet and then change it to .wifi, I am still unable to send requests over the Wi-Fi network. Here is the code I wrote: var multicast_params : NWParameters multicast_params = NWParameters.udp multicast_params.allowLocalEndpointReuse = true multicast_params.requiredInterfaceType = .wiredEthernet var ip = multicast_params.defaultProtocolStack.internetProtocol! as! NWProtocolIP.Options ip.disableMulticastLoopback = true connection_group = NWConnectionGroup(with: multicast_group_descriptor, using: multicast_params) connection_group.stateUpdateHandler = { state in print(state) if state == .ready { connection_group.send(content: "Hello from machine on 15".data(using: .utf8)) { error in print("Send to mg1 completed on wired Ethernet with error \(error?.errorCode)") var params = connection_group.parameters params.requiredInterfaceType = .wifi connection_group.send(content: "Hello from machine on 15 P2 on Wi-Fi".data(using: .utf8)) { error in print("Send to mg1 completed on Wi-Fi with error \(error?.errorCode)") } } } } Is this expected behavior when using NWConnectionGroup? Or is there a different approach I should take to ensure multicast requests are sent over both interfaces simultaneously? Any insights or suggestions would be greatly appreciated! Thanks in advance, Harshal

I’m developing an app designed for hospital environments, where public internet access may not be available. The app includes two components: the main app and a Local Connectivity Extension. Both rely on persistent TCP socket connections to communicate with a local server. We’re observing a recurring issue where the extension’s socket becomes unresponsive every 1–3 hours, but only when the device is on the lock screen, even if the main app remains in the foreground. When the screen is not locked, the connection is stable and no disconnections occur. ❗ Issue Details: • What’s going on: The extension sends a keep-alive ping packet every second, and the server replies with a pong and a system time packet. • The bug: The server stops receiving keep alive packets from the extension.  • On the server, we detect about 30 second gap on the server, a gap that shows no packets were received by the extension. This was confirmed via server logs and Wireshark).  • On the extension, from our logs there was no gap in sending packets. From it’s perspective, all packets were sent with no error.  • Because no packet are being received by the server, no packets will be sent to the extension. Eventually the server closes the connection due to keep-alive timeout.  • FYI we log when the NEAppPushProvider subclass sleeps and it did NOT go to sleep while we were debugging. 🧾 Example Logs: Extension log: 2025-03-24 18:34:48.808 sendKeepAliveRequest() 2025-03-24 18:34:49.717 sendKeepAliveRequest() 2025-03-24 18:34:50.692 sendKeepAliveRequest() ... // continuous sending of the ping packet to the server, no problems here 2025-03-24 18:35:55.063 sendKeepAliveRequest() 2025-03-24 18:35:55.063 keepAliveTimer IS TIME OUT... in CoreService. // this is triggered because we did not receive any packets from the server 2025-03-24 18:34:16.298 No keep-alive received for 16 seconds... connection ID=95b3... // this shows that there has been no packets being received by the extension ... 2025-03-24 18:34:30.298 Connection timed out on keep-alive. connection ID=95b3... // eventually closes due to no packets being received 2025-03-24 18:34:30.298 Remote Subsystem Disconnected {name=iPhone|Replica-Ext|...} ✅ Observations: • The extension process continues running and logging keep-alive attempts. • However, network traffic stops reaching the server, and no inbound packets are received by the extension. • It looks like the socket becomes silently suspended or frozen, without being properly closed or throwing an error. ❓Questions: • Do you know why this might happen within a Local Connectivity Extension, especially under foreground conditions and locked ? • Is there any known system behavior that might cause the socket to be suspended or blocked in this way after running for a few hours? Any insights or recommendations would be greatly appreciated. Thank you!

For important background information, read Extra-ordinary Networking before reading this. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" On Host Names I commonly see questions like How do I get the device’s host name? This question doesn’t make sense without more context. Apple systems have a variety of things that you might consider to be the host name: The user-assigned device name — This is a user-visible value, for example, Guy Smiley. People set this in Settings > General > About > Name. The local host name — This is a DNS name used by Bonjour, for example, guy-smiley.local. By default this is algorithmically derived from the user-assigned device name. On macOS, people can override this in Settings > General > Sharing > Local hostname. The reverse DNS name associated with the various IP addresses assigned to the device’s various network interfaces That last one is pretty much useless. You can’t get a single host name because there isn’t a single IP address. For more on that, see Don’t Try to Get the Device’s IP Address. The other two have well-defined answers, although those answers vary by platform. I’ll talk more about that below. Before getting to that, however, let’s look at the big picture. Big Picture The use cases for the user-assigned device name are pretty clear. I rarely see folks confused about that. Another use case for this stuff is that you’ve started a server and you want to tell the user how to connect to it. I discuss this in detail in Showing Connection Information in an iOS Server. However, most folks who run into problems like this do so because they’re suffering from one of the following misconceptions: The device has a DNS name. Its DNS name is unique. Its DNS name doesn’t change. Its DNS name is in some way useful for networking. Some of these may be true in some specific circumstances, but none of them are true in all circumstances. These issues are not unique to Apple platforms — if you look at the Posix spec for gethostname, it says nothing about DNS! — but folks tend to notice these problems more on Apple platforms because Apple devices are often deployed to highly dynamic network environments. So, before you start using the APIs discussed in this post, think carefully about your assumptions. And if you actually do want to work with DNS, there are two cases to consider: If you’re looking for the local host name, use the APIs discussed above. In other cases, it’s likely that the APIs in this post will not be helpful and you’d be better off focusing on DNS APIs [1]. [1] The API I recommend for this is DNS-SD. See the DNS section in TN3151 Choosing the right networking API. macOS To get the user-assigned device name, call the SCDynamicStoreCopyComputerName(_:_:) function. For example: let userAssignedDeviceName = SCDynamicStoreCopyComputerName(nil, nil) as String? To get the local host name, call the SCDynamicStoreCopyLocalHostName(_:) function. For example: let localHostName = SCDynamicStoreCopyLocalHostName(nil) as String? IMPORTANT This returns just the name label. To form a local host name, append .local.. Both routines return an optional result; code defensively! If you’re displaying these values to the user, use the System Configuration framework dynamic store notification mechanism to keep your UI up to date. iOS and Friends On iOS, iPadOS, tvOS, and visionOS, get the user-assigned device name from the name property on UIDevice. IMPORTANT Access to this is now restricted. For more on that, see the documentation for the com.apple.developer.device-information.user-assigned-device-name entitlement. There is no direct mechanism to get the local host name. Other APIs There are a wide variety of other APIs that purport to return the host name. These include: gethostname The name property on NSHost [1] The hostName property on NSProcessInfo (ProcessInfo in Swift) These are problematic for a number of reasons: They have a complex implementation that makes it hard to predict what value you’ll get back. They might end up trying to infer the host name from the network environment. The existing behaviour is hard to change due to compatibility concerns. Some of them are marked as to-be-deprecated. IMPORTANT The second issue is particularly problematic, because it involves synchronous DNS requests [2]. That’s slow in general. Worse yet, if the network environment is restricted in some way, these calls can be very slow, taking about 30 seconds to time out. Given these problems, it’s generally best to avoid calling these routines at all. [1] It also has a names property, which is a little closer to reality but still not particularly useful. [2] Actually, that’s not true for gethostname. Rather, that call just returns whatever was last set by sethostname. This is always fast. The System Configuration framework infrastructure calls sethostname to update the host name as the system state changes.

I'm able to discover a service with Bonjour, which gets me an nw_browse_result_t from which I can get an nw_endpoint_t and then an nw_connection_t. That's all fine. But this particular service runs on 3 ports. The port numbers of the other 2 ports are in the txt record (but they are well-known and stable anyway). How can I create 2 more nw_connection_t to the same host/IP but on a different port? I already have this working with NSNetService, but am trying to update to Network.framework. I've found nw_endpoint_get_address() but the docs say it returns null "if the endpoint is not of type nw_endpoint_type_address" and indeed nw_browse_result_t gives me an nw_endpoint_type_bonjour_service.

We have used ::gethostname to retrieve hostname in our tunnel provider extension and found it returns "localhost" on iOS 17+. So we changed to use [[NSProcessInfo processInfo] hostName]. However it often caused 30+ delay in the extension process on a few devices and always returns "localhost". The sysdiagnose shows a lot of DNS query logs as below: default mDNSResponder 2025-03-19 17:15:12.453769 +0800 75281: 0x11ad501 [R80937] DNSServiceCreateConnection START PID[79767](ACExtension) default mDNSResponder 2025-03-19 17:15:12.453892 +0800 75281: 0x11ad501 [R80938] DNSServiceQueryRecord START -- qname: <mask.hash: 'fNnSAdyuhKXqCny8+neXvw=='>, qtype: PTR, flags: 0x15000, interface index: -1, client pid: 79767 (ACExtension), name hash: 84de01e1 default mDNSResponder 2025-03-19 17:15:12.458395 +0800 75281: 0x11ad501 [R80939] DNSServiceQueryRecord START -- qname: <mask.hash: '2X6qN/YT0yh2psKwrGWokg=='>, qtype: PTR, flags: 0x15000, interface index: 0, client pid: 79767 (ACExtension), name hash: f25c923e default mDNSResponder 2025-03-19 17:15:12.462924 +0800 75281: 0x11ad501 [R80940] DNSServiceQueryRecord START -- qname: <mask.hash: 'peyRWEblLKbNvcOXPjSeMQ=='>, qtype: PTR, flags: 0x15000, interface index: 0, client pid: 79767 (ACExtension), name hash: 83323cc4

Hi, In my attempt to reconnect NEPacketTunnelProvider, when there is a network change, I am making use of self.reasserting and setTunnelNetworkSettings, and I am calling it with similar parameters as during the startTunnelWithOptions callback and making sure to make a new call for setting the includedRoutes: NEPacketTunnelNetworkSettings.IPv4Settings.includedRoutes = @[NEIPv4Route.defaultRoute]; This works sometimes, when I switch to a new network, but most of the time the traffic flow stops and it only works when I switch back to the first network. The only difference I could see in the routing table when it works is when there is a presence of Apple Specific network routes as follows: 17.57.145.133 link#22 UHWIig utun4 17.57.145.135 link#22 UHWIig utun4 17.57.145.137 link#22 UHWIig utun4 or 13.107.246.47 link#22 UHW3Ig utun4 17.57.145.148 link#22 UHWIig utun4 17.57.145.149 link#22 UHWIig utun4 37.252.171.52 link#22 UHWIig utun4 37.252.173.215 link#22 UHWIig utun4 Note: utun4 has index of 22 or some other combination of routes for Apple, I am not sure what these routes are for but they are present when NEPacketTunnelProvider starts. When switching to a new network and calling setTunnelNetworkSettings of NEPacketTunnelProvider, in any case when these routes are not present the traffic flow stops and it works otherwise. Switching back the first network, brings back these routes and the traffic flow continues, although it also goes through the same setTunnelNetworkSettings call and logic. I am not sure if these route table entries could be the culprit, because I did try to add them manually and that didn't help but my guess is that some system calls are failing for some unknown reason which might be the reason for the missing routes and some other configuration needed for proper traffic flow, which I am not seeing. Any help or information would be greatly appreciated. Thanks.

Dear Apple： We encountered a problem when using the Wi-Fi connection feature. When calling the Wi-Fi connection interface NEHotspotConfigurationManager applyConfiguration, it fails probabilistically. After analyzing the air interface packets, it appears that the Apple device did not send the auth message. How should we locate this issue? Are there any points to pay attention to when calling the Wi-Fi connection interface? Thanks