General: Forums subtopic: App & System Services > Networking TN3151 Choosing the right networking API Networking Overview document — Despite the fact that this is in the archive, this is still really useful. TLS for App Developers forums post Choosing a Network Debugging Tool documentation WWDC 2019 Session 712 Advances in Networking, Part 1 — This explains the concept of constrained networking, which is Apple’s preferred solution to questions like How do I check whether I’m on Wi-Fi? TN3135 Low-level networking on watchOS TN3179 Understanding local network privacy Adapt to changing network conditions tech talk Understanding Also-Ran Connections forums post Extra-ordinary Networking forums post Foundation networking: Forums tags: Foundation, CFNetwork URL Loading System documentation — NSURLSession, or URLSession in Swift, is the recommended API for HTTP[S] on Apple platforms. Moving to Fewer, Larger Transfers forums post Testing Background Session Code forums post Network framework: Forums tag: Network Network framework documentation — Network framework is the recommended API for TCP, UDP, and QUIC on Apple platforms. Building a custom peer-to-peer protocol sample code (aka TicTacToe) Implementing netcat with Network Framework sample code (aka nwcat) Configuring a Wi-Fi accessory to join a network sample code Moving from Multipeer Connectivity to Network Framework forums post NWEndpoint History and Advice forums post Network Extension (including Wi-Fi on iOS): See Network Extension Resources Wi-Fi Fundamentals TN3111 iOS Wi-Fi API overview Wi-Fi Aware framework documentation Wi-Fi on macOS: Forums tag: Core WLAN Core WLAN framework documentation Wi-Fi Fundamentals Secure networking: Forums tags: Security Apple Platform Security support document Preventing Insecure Network Connections documentation — This is all about App Transport Security (ATS). WWDC 2017 Session 701 Your Apps and Evolving Network Security Standards [1] — This is generally interesting, but the section starting at 17:40 is, AFAIK, the best information from Apple about how certificate revocation works on modern systems. Available trusted root certificates for Apple operating systems support article Requirements for trusted certificates in iOS 13 and macOS 10.15 support article About upcoming limits on trusted certificates support article Apple’s Certificate Transparency policy support article What’s new for enterprise in iOS 18 support article — This discusses new key usage requirements. Technote 2232 HTTPS Server Trust Evaluation Technote 2326 Creating Certificates for TLS Testing QA1948 HTTPS and Test Servers Miscellaneous: More network-related forums tags: 5G, QUIC, Bonjour On FTP forums post Using the Multicast Networking Additional Capability forums post Investigating Network Latency Problems forums post WirelessInsights framework documentation iOS Network Signal Strength forums post Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" [1] This video is no longer available from Apple, but the URL should help you locate other sources of this info.

Questions about FTP crop up from time-to-time here on DevForums. In most cases I write a general “don’t use FTP” response, but I don’t have time to go into all the details. I’ve created this post as a place to collect all of those details, so I can reference them in other threads. IMPORTANT Apple’s official position on FTP is: All our FTP APIs have been deprecated, and you should avoid using deprecated APIs. Apple has been slowly removing FTP support from the user-facing parts of our system. The most recent example of this is that we removed the ftp command-line tool in macOS 10.13. You should avoid the FTP protocol and look to adopt more modern alternatives. The rest of this post is an informational explanation of the overall FTP picture. This post is locked so I can keep it focused. If you have questions or comments, please do create a new thread in the App & System Services > Networking subtopic and I’ll respond there. Don’t Use FTP FTP is a very old and very crufty protocol. Certain things that seem obvious to us now — like being able to create a GUI client that reliably shows a directory listing in a platform-independent manner — aren’t possible to do in FTP. However, by far the biggest problem with FTP is that it provides no security [1]. Specifically, the FTP protocol: Provides no on-the-wire privacy, so anyone can see the data you transfer Provides no client-authenticates-server authentication, so you have no idea whether you’re talking to the right server Provides no data integrity, allowing an attacker to munge your data in transit Transfers user names and passwords in the clear Using FTP for anonymous downloads may be acceptable (see the explanation below) but most other uses of FTP are completely inappropriate for the modern Internet. IMPORTANT You should only use FTP for anonymous downloads if you have an independent way to check the integrity of the data you’ve downloaded. For example, if you’re downloading a software update, you could use code signing to check its integrity. If you don’t check the integrity of the data you’ve downloaded, an attacker could substitute a malicious download instead. This would be especially bad in, say, the software update case. These fundamental problems with the FTP protocol mean that it’s not a priority for Apple. This is reflected in the available APIs, which is the subject of the next section. FTP APIs Apple provides two FTP APIs: All Apple platforms provide FTP downloads via URLSession. Most Apple platforms (everything except watchOS) support CFFTPStream, which allows for directory listings, downloads, uploads, and directory creation. All of these FTP APIs are now deprecated: URLSession was deprecated for the purposes of FTP in the 2022 SDKs (macOS 13, iOS 16, iPadOS 16, tvOS 16, watchOS 9) [2]. CFFTPStream was deprecated in the 2016 SDKs (macOS 10.11, iOS 9, iPadOS 9, tvOS 9). CFFTPStream still works about as well as it ever did, which is not particularly well. Specifically: There is at least one known crashing bug (r. 35745763), albeit one that occurs quite infrequently. There are clear implementation limitations — like the fact that CFFTPCreateParsedResourceListing assumes a MacRoman text encoding (r. 7420589) — that won’t be fixed. If you’re looking for an example of how to use these APIs, check out SimpleFTPSample. Note This sample hasn’t been updated since 2013 and is unlikely to ever be updated given Apple’s position on FTP. The FTP support in URLSession has significant limitations: It only supports FTP downloads; there’s no support for uploads or any other FTP operations. It doesn’t support resumable FTP downloads [3]. It doesn’t work in background sessions. That prevents it from running FTP downloads in the background on iOS. It’s only supported in classic loading mode. See the usesClassicLoadingMode property and the doc comments in <Foundation/NSURLSession.h>. If Apple’s FTP APIs are insufficient for your needs, you’ll need to write or acquire your own FTP library. Before you do that, however, consider switching to an alternative protocol. After all, if you’re going to go to the trouble of importing a large FTP library into your code base, you might as well import a library for a better protocol. The next section discusses some options in this space. Alternative Protocols There are numerous better alternatives to FTP: HTTPS is by far the best alternative to FTP, offering good security, good APIs on Apple platforms, good server support, and good network compatibility. Implementing traditional FTP operations over HTTPS can be a bit tricky. One possible way forward is to enable DAV extensions on the server. FTPS is FTP over TLS (aka SSL). While FTPS adds security to the protocol, which is very important, it still inherits many of FTP’s other problems. Personally I try to avoid this protocol. SFTP is a file transfer protocol that’s completely unrelated to FTP. It runs over SSH, making it a great alternative in many of the ad hoc setups that traditionally use FTP. Apple doesn’t have an API for either FTPS or SFTP, although on macOS you may be able to make some headway by invoking the sftp command-line tool. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" [1] In another thread someone asked me about FTP’s other problems, those not related to security, so let’s talk about that. One of FTP’s implicit design goals was to provide cross-platform support that exposes the target platform. You can think of FTP as being kinda like telnet. When you telnet from Unix to VMS, it doesn’t aim to abstract away VMS commands, so that you can type Unix commands at the VMS prompt. Rather, you’re expected to run VMS commands. FTP is (a bit) like that. This choice made sense back when the FTP protocol was invented. Folks were expecting to use FTP via a command-line client, so there was a human in the loop. If they ran a command and it produced VMS-like output, that was fine because they knew that they were FTPing into a VMS machine. However, most users today are using GUI clients, and this design choice makes it very hard to create a general GUI client for FTP. Let’s consider the simple problem of getting the contents of a directory. When you send an FTP LIST command, the server would historically run the platform native directory list command and pipe the results back to you. To create a GUI client you have to parse that data to extract the file names. Doing that is a serious challenge. Indeed, just the first step, working out the text encoding, is a challenge. Many FTP servers use UTF-8, but some use ISO-Latin-1, some use other standard encodings, some use Windows code pages, and so on. I say “historically” above because there have been various efforts to standardise this stuff, both in the RFCs and in individual server implementations. However, if you’re building a general client you can’t rely on these efforts. After all, the reason why folks continue to use FTP is because of it widespread support. [2] To quote the macOS 13 Ventura Release Notes: FTP is deprecated for URLSession and related APIs. Please adopt modern secure networking protocols such as HTTPS. (92623659) [3] Although you can implement resumable downloads using the lower-level CFFTPStream API, courtesy of the kCFStreamPropertyFTPFileTransferOffset property. Revision History 2025-10-06 Explained that URLSession only supports FTP in classic loading mode. Made other minor editorial changes. 2024-04-15 Added a footnote about FTP’s other problems. Made other minor editorial changes. 2022-08-09 Noted that the FTP support in URLSession is now deprecated. Made other minor editorial changes. 2021-04-06 Fixed the formatting. Fixed some links. 2018-02-23 First posted.

I've been able to run this sample project with the PIRServer. But the urls are still not blocked. https://developer.apple.com/documentation/networkextension/filtering-traffic-by-url https://github.com/apple/pir-service-example I got this on the log Received filter status change: <FilterStatus: 'running'>

At WWDC 2015 Apple announced two major enhancements to the Network Extension framework: Network Extension providers — These are app extensions that let you insert your code at various points within the networking stack, including: Packet tunnels via NEPacketTunnelProvider App proxies via NEAppProxyProvider Content filters via NEFilterDataProvider and NEFilterControlProvider Hotspot Helper (NEHotspotHelper) — This allows you to create an app that assists the user in navigating a hotspot (a Wi-Fi network where the user must interact with the network in order to get access to the wider Internet). Originally, using any of these facilities required authorisation from Apple. Specifically, you had to apply for, and be granted access to, a managed capability. In Nov 2016 this policy changed for Network Extension providers. Any developer can now use the Network Extension provider capability like they would any other capability. There is one exception to this rule: Network Extension app push providers, introduced by iOS 14 in 2020, still requires that Apple authorise the use of a managed capability. To apply for that, follow the link in Local push connectivity. Also, the situation with Hotspot Helpers remains the same: Using a Hotspot Helper, requires that Apple authorise that use via a managed capability. To apply for that, follow the link in Hotspot helper. IMPORTANT Pay attention to this quote from the documentation: NEHotspotHelper is only useful for hotspot integration. There are both technical and business restrictions that prevent it from being used for other tasks, such as accessory integration or Wi-Fi based location. The rest of this document answers some frequently asked questions about the Nov 2016 change. #1 — Has there been any change to the OS itself? No, this change only affects the process by which you get the capabilities you need in order to use existing Network Extension framework facilities. Previously these were managed capabilities, meaning their use was authorised by Apple. Now, except for app push providers and Hotspot Helper, you can enable the necessary capabilities using Xcode’s Signing & Capabilities editor or the Developer website. IMPORTANT Some Network Extension providers have other restrictions on their use. For example, a content filter can only be used on a supervised device. These restrictions are unchanged. See TN3134 Network Extension provider deployment for the details. #2 — How exactly do I enable the Network Extension provider capability? In the Signing & Capabilities editor, add the Network Extensions capability and then check the box that matches the provider you’re creating. In the Certificates, Identifiers & Profiles section of the Developer website, when you add or edit an App ID, you’ll see a new capability listed, Network Extensions. Enable that capability in your App ID and then regenerate the provisioning profiles based on that App ID. A newly generated profile will include the com.apple.developer.networking.networkextension entitlement in its allowlist; this is an array with an entry for each of the supported Network Extension providers. To confirm that this is present, dump the profile as shown below. $ security cms -D -i NETest.mobileprovision … <plist version="1.0"> <dict> … <key>Entitlements</key> <dict> <key>com.apple.developer.networking.networkextension</key> <array> <string>packet-tunnel-provider</string> <string>content-filter-provider</string> <string>app-proxy-provider</string> … and so on … </array> … </dict> … </dict> </plist> #3 — I normally use Xcode’s Signing & Capabilities editor to manage my entitlements. Do I have to use the Developer website for this? No. Xcode 11 and later support this capability in the Signing & Capabilities tab of the target editor (r. 28568128 ). #4 — Can I still use Xcode’s “Automatically manage signing” option? Yes. Once you modify your App ID to add the Network Extension provider capability, Xcode’s automatic code signing support will include the entitlement in the allowlist of any profiles that it generates based on that App ID. #5 — What should I do if I previously applied for the Network Extension provider managed capability and I’m still waiting for a reply? Consider your current application cancelled, and use the new process described above. #6 — What should I do if I previously applied for the Hotspot Helper managed capability and I’m still waiting for a reply? Apple will continue to process Hotspot Helper managed capability requests and respond to you in due course. #7 — What if I previously applied for both Network Extension provider and Hotspot Helper managed capabilities? Apple will ignore your request for the Network Extension provider managed capability and process it as if you’d only asked for the Hotspot Helper managed capability. #8 — On the Mac, can Developer ID apps host Network Extension providers? Yes, but there are some caveats: This only works on macOS 10.15 or later. Your Network Extension provider must be packaged as a system extension, not an app extension. You must use the *-systemextension values for the Network Extension entitlement (com.apple.developer.networking.networkextension). For more on this, see Exporting a Developer ID Network Extension. #9 — After moving to the new process, my app no longer has access to the com.apple.managed.vpn.shared keychain access group. How can I regain that access? Access to this keychain access group requires another managed capability. If you need that, please open a DTS code-level support request and we’ll take things from there. IMPORTANT This capability is only necessary if your VPN supports configuration via a configuration profile and needs to access credentials from that profile (as discussed in the Profile Configuration section of the NETunnelProviderManager Reference). Many VPN apps don’t need this facility. If you were previously granted the Network Extension managed capability (via the process in place before Nov 2016), make sure you mention that; restoring your access to the com.apple.managed.vpn.shared keychain access group should be straightforward in that case. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" Revision History 2025-11-11 Removed the discussion of TSI assets because those are no longer a thing. 2025-09-12 Adopted the code-level support request terminology. Made other minor editorial changes. 2023-01-11 Added a discussion of Network Extension app push providers. Added a link to Exporting a Developer ID Network Extension. Added a link to TN3134. Made significant editorial changes. 2020-02-27 Fixed the formatting. Updated FAQ#3. Made minor editorial changes. 2020-02-16 Updated FAQ#8 to account for recent changes. Updated FAQ#3 to account for recent Xcode changes. Made other editorial changes. 2016-01-25 Added FAQ#9. 2016-01-6 Added FAQ#8. 2016-11-11 Added FAQ#5, FAQ#6 and FAQ#7. 2016-11-11 First posted.

My external device can generate a fixed Wi-Fi network. When I connect to this Wi-Fi using my iPhone 17 Pro Max (iOS version 26.0.1), and my app tries to establish a connection using the following method, this method returns -1 int connect(int, const struct sockaddr *, socklen_t) __DARWIN_ALIAS_C(connect); However, when I use other phones, such as iPhone 12, iPhone 8, iPhone 11, etc., to connect to this external device, the above method always returns successfully, with the parameters passed to the method remaining the same. I also tried resetting the network settings on the iPhone 17 Pro Max (iOS version 26.0.1), but it still cannot establish a connection.

For important background information, read Extra-ordinary Networking before reading this. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" Working with a Wi-Fi Accessory Building an app that works with a Wi-Fi accessory presents specific challenges. This post discusses those challenges and some recommendations for how to address them. Note While my focus here is iOS, much of the info in this post applies to all Apple platforms. IMPORTANT iOS 18 introduced AccessorySetupKit, a framework to simplify the discovery and configuration of an accessory. I’m not fully up to speed on that framework myself, but I encourage you to watch WWDC 2024 Session 10203 Meet AccessorySetupKit and read the framework documentation. IMPORTANT iOS 26 introduced WiFiAware, a framework for setting up communication with Wi-Fi Aware accessories. Wi-Fi Aware is an industry standard to securely discover, pair, and communicate with nearby devices. This is especially useful for stand-alone accessories (defined below). For more on this framework, watch WWDC 2025 Session 228 Supercharge device connectivity with Wi-Fi Aware and read the framework documentation. For information on how to create a Wi-Fi Aware accessory that works with iPhone, go to Developer > Accessories, download Accessory Design Guidelines for Apple Devices, and review the Wi-Fi Aware chapter. Accessory Categories I classify Wi-Fi accessories into three different categories. A bound accessory is ultimately intended to join the user’s Wi-Fi network. It may publish its own Wi-Fi network during the setup process, but the goal of that process is to get the accessory on to the existing network. Once that’s done, your app interacts with the accessory using ordinary networking APIs. An example of a bound accessory is a Wi-Fi capable printer. A stand-alone accessory publishes a Wi-Fi network at all times. An iOS device joins that network so that your app can interact with it. The accessory never provides access to the wider Internet. An example of a stand-alone accessory is a video camera that users take with them into the field. You might want to write an app that joins the camera’s network and downloads footage from it. A gateway accessory is one that publishes a Wi-Fi network that provides access to the wider Internet. Your app might need to interact with the accessory during the setup process, but after that it’s useful as is. An example of this is a Wi-Fi to WWAN gateway. Not all accessories fall neatly into these categories. Indeed, some accessories might fit into multiple categories, or transition between categories. Still, I’ve found these categories to be helpful when discussing various accessory integration challenges. Do You Control the Firmware? The key question here is Do you control the accessory’s firmware? If so, you have a bunch of extra options that will make your life easier. If not, you have to adapt to whatever the accessory’s current firmware does. Simple Improvements If you do control the firmware, I strongly encourage you to: Support IPv6 Implement Bonjour [1] These two things are quite easy to do — most embedded platforms support them directly, so it’s just a question of turning them on — and they will make your life significantly easier: Link-local addresses are intrinsic to IPv6, and IPv6 is intrinsic to Apple platforms. If your accessory supports IPv6, you’ll always be able to communicate with it, regardless of how messed up the IPv4 configuration gets. Similarly, if you support Bonjour, you’ll always be able to find your accessory on the network. [1] Bonjour is an Apple term for three Internet standards: RFC 3927 Dynamic Configuration of IPv4 Link-Local Addresses RFC 6762 Multicast DNS RFC 6763 DNS-Based Service Discovery WAC For a bound accessory, support Wireless Accessory Configuration (WAC). This is a relatively big ask — supporting WAC requires you to join the MFi Program — but it has some huge benefits: You don’t need to write an app to configure your accessory. The user will be able to do it directly from Settings. If you do write an app, you can use the EAWiFiUnconfiguredAccessoryBrowser class to simplify your configuration process. HomeKit For a bound accessory that works in the user’s home, consider supporting HomeKit. This yields the same onboarding benefits as WAC, and many other benefits as well. Also, you can get started with the HomeKit Open Source Accessory Development Kit (ADK). Bluetooth LE If your accessory supports Bluetooth LE, think about how you can use that to improve your app’s user experience. For an example of that, see SSID Scanning, below. Claiming the Default Route, Or Not? If your accessory publishes a Wi-Fi network, a key design decision is whether to stand up enough infrastructure for an iOS device to make it the default route. IMPORTANT To learn more about how iOS makes the decision to switch the default route, see The iOS Wi-Fi Lifecycle and Network Interface Concepts. This decision has significant implications. If the accessory’s network becomes the default route, most network connections from iOS will be routed to your accessory. If it doesn’t provide a path to the wider Internet, those connections will fail. That includes connections made by your own app. Note It’s possible to get around this by forcing your network connections to run over WWAN. See Binding to an Interface in Network Interface Techniques and Running an HTTP Request over WWAN. Of course, this only works if the user has WWAN. It won’t help most iPad users, for example. OTOH, if your accessory’s network doesn’t become the default route, you’ll see other issues. iOS will not auto-join such a network so, if the user locks their device, they’ll have to manually join the network again. In my experience a lot of accessories choose to become the default route in situations where they shouldn’t. For example, a bound accessory is never going to be able to provide a path to the wider Internet so it probably shouldn’t become the default route. However, there are cases where it absolutely makes sense, the most obvious being that of a gateway accessory. Acting as a Captive Network, or Not? If your accessory becomes the default route you must then decide whether to act like a captive network or not. IMPORTANT To learn more about how iOS determines whether a network is captive, see The iOS Wi-Fi Lifecycle. For bound and stand-alone accessories, becoming a captive network is generally a bad idea. When the user joins your network, the captive network UI comes up and they have to successfully complete it to stay on the network. If they cancel out, iOS will leave the network. That makes it hard for the user to run your app while their iOS device is on your accessory’s network. In contrast, it’s more reasonable for a gateway accessory to act as a captive network. SSID Scanning Many developers think that TN3111 iOS Wi-Fi API overview is lying when it says: iOS does not have a general-purpose API for Wi-Fi scanning It is not. Many developers think that the Hotspot Helper API is a panacea that will fix all their Wi-Fi accessory integration issues, if only they could get the entitlement to use it. It will not. Note this comment in the official docs: NEHotspotHelper is only useful for hotspot integration. There are both technical and business restrictions that prevent it from being used for other tasks, such as accessory integration or Wi-Fi based location. Even if you had the entitlement you would run into these technical restrictions. The API was specifically designed to support hotspot navigation — in this context hotspots are “Wi-Fi networks where the user must interact with the network to gain access to the wider Internet” — and it does not give you access to on-demand real-time Wi-Fi scan results. Many developers look at another developer’s app, see that it’s displaying real-time Wi-Fi scan results, and think there’s some special deal with Apple that’ll make that work. There is not. In reality, Wi-Fi accessory developers have come up with a variety of creative approaches for this, including: If you have a bound accessory, you might add WAC support, which makes this whole issue go away. In many cases, you can avoid the need for Wi-Fi scan results by adopting AccessorySetupKit. You might build your accessory with a barcode containing the info required to join its network, and scan that from your app. This is the premise behind the Configuring a Wi-Fi Accessory to Join the User’s Network sample code. You might configure all your accessories to have a common SSID prefix, and then take advantage of the prefix support in NEHotspotConfigurationManager. See Programmatically Joining a Network, below. You might have your app talk to your accessory via some other means, like Bluetooth LE, and have the accessory scan for Wi-Fi networks and return the results. Programmatically Joining a Network Network Extension framework has an API, NEHotspotConfigurationManager, to programmatically join a network, either temporarily or as a known network that supports auto-join. For the details, see Wi-Fi Configuration. One feature that’s particularly useful is it’s prefix support, allowing you to create a configuration that’ll join any network with a specific prefix. See the init(ssidPrefix:) initialiser for the details. For examples of how to use this API, see: Configuring a Wi-Fi Accessory to Join the User’s Network — It shows all the steps for one approach for getting a non-WAC bound accessory on to the user’s network. NEHotspotConfiguration Sample — Use this to explore the API in general. Secure Communication Users expect all network communication to be done securely. For some ideas on how to set up a secure connection to an accessory, see TLS For Accessory Developers. Revision History 2025-11-05 Added a link to the Accessory Design Guidelines for Apple Devices. 2025-06-19 Added a preliminary discussion of Wi-Fi Aware. 2024-09-12 Improved the discussion of AccessorySetupKit. 2024-07-16 Added a preliminary discussion of AccessorySetupKit. 2023-10-11 Added the HomeKit section. Fixed the link in Secure Communication to point to TLS For Accessory Developers. 2023-07-23 First posted.

Hi there, We’re developing a companion app for a smart home product that communicates over the user’s local network. To provision the device, it initially creates its own Wi-Fi network. The user joins this temporary network and enters their home Wi-Fi credentials via our app. The app then sends those credentials directly to the device, which stores them and connects to the local network for normal operation. We’re using AccessorySetupKit to discover nearby devices (via SSID prefix) and NEHotspotManager to join the accessory’s Wi-Fi network once the user selects it. This workflow works well in general. However, we’ve encountered a problem: if the user factory-resets the accessory, or needs to restart setup (for example, after entering the wrong Wi-Fi password), the device no longer appears in the accessory picker. In iOS 18, we were able to work around this by calling removeAccessory() after the device is selected. This forces the picker to always display the accessory again. But in iOS 26, a new confirmation dialog now appears when calling removeAccessory(), which confuses users during setup. We’re looking for a cleaner way to handle this scenario — ideally a way to make the accessory rediscoverable without prompting the user to confirm removal. Thanks for your time and guidance.

Is Apple's Wi-Fi Aware certified by the Wi-Fi Alliance? Is there any non-compliance of Apple's Wi-Fi Aware with the Wi-Fi Alliance standards? Does Apple have a roadmap to switch AWDL to Wi-Fi Aware? Does Apple have plans to adopt Wi-Fi Aware in Mac computers?

Most apps perform ordinary network operations, like fetching an HTTP resource with URLSession and opening a TCP connection to a mail server with Network framework. These operations are not without their challenges, but they’re the well-trodden path. If your app performs ordinary networking, see TN3151 Choosing the right networking API for recommendations as to where to start. Some apps have extra-ordinary networking requirements. For example, apps that: Help the user configure a Wi-Fi accessory Require a connection to run over a specific interface Listen for incoming connections Building such an app is tricky because: Networking is hard in general. Apple devices support very dynamic networking, and your app has to work well in whatever environment it’s running in. Documentation for the APIs you need is tucked away in man pages and doc comments. In many cases you have to assemble these APIs in creative ways. If you’re developing an app with extra-ordinary networking requirements, this post is for you. Note If you have questions or comments about any of the topics discussed here, put them in a new thread here on DevForums. Make sure I see it by putting it in the App & System Services > Networking area. And feel free to add tags appropriate to the specific technology you’re using, like Foundation, CFNetwork, Network, or Network Extension. Links, Links, and More Links Each topic is covered in a separate post: The iOS Wi-Fi Lifecycle describes how iOS joins and leaves Wi-Fi networks. Understanding this is especially important if you’re building an app that works with a Wi-Fi accessory. Network Interface Concepts explains how Apple platforms manage network interfaces. If you’ve got this far, you definitely want to read this. Network Interface Techniques offers a high-level overview of some of the more common techniques you need when working with network interfaces. Network Interface APIs describes APIs and core techniques for working with network interfaces. It’s referenced by many other posts. Running an HTTP Request over WWAN explains why most apps should not force an HTTP request to run over WWAN, what they should do instead, and what to do if you really need that behaviour. If you’re building an iOS app with an embedded network server, see Showing Connection Information in an iOS Server for details on how to get the information to show to your user so they can connect to your server. Many folks run into trouble when they try to find the device’s IP address, or other seemingly simple things, like the name of the Wi-Fi interface. Don’t Try to Get the Device’s IP Address explains why these problems are hard, and offers alternative approaches that function correctly in all network environments. Similarly, folks also run into trouble when trying to get the host name. On Host Names explains why that’s more complex than you might think. If you’re working with broadcasts or multicasts, see Broadcasts and Multicasts, Hints and Tips. If you’re building an app that works with a Wi-Fi accessory, see Working with a Wi-Fi Accessory. If you’re trying to gather network interface statistics, see Network Interface Statistics. There are also some posts that are not part of this series but likely to be of interest if you’re working in this space: TN3179 Understanding local network privacy discusses the local network privacy feature. Calling BSD Sockets from Swift does what it says on the tin, that is, explains how to call BSD Sockets from Swift. When doing weird things with the network, you often find yourself having to use BSD Sockets, and that API is not easy to call from Swift. The code therein is primarily for the benefit of test projects, oh, and DevForums posts like these. TN3111 iOS Wi-Fi API overview is a critical resource if you’re doing Wi-Fi specific stuff on iOS. TLS For Accessory Developers tackles the tricky topic of how to communicate securely with a network-based accessory. A Peek Behind the NECP Curtain discusses NECP, a subsystem that control which programs have access to which network interfaces. Networking Resources has links to many other useful resources. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" Revision History 2025-07-31 Added a link to A Peek Behind the NECP Curtain. 2025-03-28 Added a link to On Host Names. 2025-01-16 Added a link to Broadcasts and Multicasts, Hints and Tips. Updated the local network privacy link to point to TN3179. Made other minor editorial changes. 2024-04-30 Added a link to Network Interface Statistics. 2023-09-14 Added a link to TLS For Accessory Developers. 2023-07-23 First posted.

For important background information, read Extra-ordinary Networking before reading this. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" Broadcasts and Multicasts, Hints and Tips I regularly see folks struggle with broadcasts and multicasts on Apple platforms. This post is my attempt to clear up some of the confusion. This post covers both IPv4 and IPv6. There is, however, a key difference. In IPv4, broadcasts and multicasts are distinct concepts. In contrast, IPv6 doesn’t support broadcast as such; rather, it treats broadcasts as a special case of multicasts. IPv6 does have an all nodes multicast address, but it’s rarely used. Before reading this post, I suggest you familiarise yourself with IP addresses in general. A good place to start is The Fount of All Knowledge™. Service Discovery A lot of broadcast and multicast questions come from folks implementing their own service discovery protocol. I generally recommend against doing that, for the reasons outlined in the Service Discovery section of Don’t Try to Get the Device’s IP Address. There are, however, some good reasons to implement a custom service discovery protocol. For example, you might be working with an accessory that only supports this custom protocol [1]. If you must implement your own service discovery protocol, read this post and also read the advice in Don’t Try to Get the Device’s IP Address. IMPORTANT Sometimes I see folks implementing their own version of mDNS. This is almost always a mistake: If you’re using third-party tooling that includes its own mDNS implementation, it’s likely that this tooling allows you to disable that implementation and instead rely on the Bonjour support that’s built-in to all Apple platforms. If you’re doing some weird low-level thing with mDNS or DNS-SD, it’s likely that you can do that with the low-level DNS-SD API. [1] And whose firmware you can’t change! I talk more about this in Working with a Wi-Fi Accessory. API Choice Broadcasts and multicasts typically use UDP [1]. TN3151 Choosing the right networking API describes two recommended UDP APIs: Network framework BSD Sockets Our general advice is to prefer Network framework over BSD Sockets, but UDP broadcasts and multicasts are an exception to that rule. Network framework has very limited UDP broadcast support. And while it’s support for UDP multicasts is less limited, it’s still not sufficient for all UDP applications. In cases where Network framework is not sufficient, BSD Sockets is your only option. [1] It is possible to broadcast and multicast at the Ethernet level, but I almost never see questions about that. UDP Broadcasts in Network Framework Historically I’ve claimed that Network framework was useful for UDP broadcasts is very limited circumstances (for example, in the footnote on this post). I’ve since learnt that this isn’t the case. Or, more accurately, this support is so limited (r. 122924701) as to be useless in practice. For the moment, if you want to work with UDP broadcasts, your only option is BSD Sockets. UDP Multicasts in Network Framework Network framework supports UDP multicast using the NWConnectionGroup class with the NWMulticastGroup group descriptor. This support has limits. The most significant limit is that it doesn’t support broadcasts; it’s for multicasts only. Note This only relevant to IPv4. Remember that IPv6 doesn’t support broadcasts as a separate concept. There are other limitations, but I don’t have a good feel for them. I’ll update this post as I encounter issues. Local Network Privacy Some Apple platforms support local network privacy. This impacts broadcasts and multicasts in two ways: Broadcasts and multicasts require local network access, something that’s typically granted by the user. Broadcasts and multicasts are limited by a managed entitlement (except on macOS). TN3179 Understanding local network privacy has lots of additional info on this topic, including the list of platforms to which it applies. Send, Receive, and Interfaces When you broadcast or multicast, there’s a fundamental asymmetry between send and receive: You can reasonable receive datagrams on all broadcast-capable interfaces. But when you send a datagram, it has to target a specific interface. The sending behaviour is the source of many weird problems. Consider the IPv4 case. If you send a directed broadcast, you can reasonably assume it’ll be routed to the correct interface based on the network prefix. But folks commonly send an all-hosts broadcast (255.255.255.255), and it’s not obvious what happens in that case. Note If you’re unfamiliar with the terms directed broadcast and all-hosts broadcast, see IP address. The exact rules for this are complex, vary by platform, and can change over time. For that reason, it’s best to write your broadcast code to be interface specific. That is: Identify the interfaces on which you want to work. Create a socket per interface. Bind that socket to that interface. Note Use the IP_BOUND_IF (IPv4) or IPV6_BOUND_IF (IPv6) socket options rather than binding to the interface address, because the interface address can change over time. Extra-ordinary Networking has links to other posts which discuss these concepts and the specific APIs in more detail. Miscellaneous Gotchas A common cause of mysterious broadcast and multicast problems is folks who hard code BSD interface names, like en0. Doing that might work for the vast majority of users but then fail in some obscure scenarios. BSD interface names are not considered API and you must not hard code them. Extra-ordinary Networking has links to posts that describe how to enumerate the interface list and identify interfaces of a specific type. Don’t assume that there’ll be only one interface of a given type. This might seem obviously true, but it’s not. For example, our platforms support peer-to-peer Wi-Fi, so each device has multiple Wi-Fi interfaces. When sending a broadcast, don’t forget to enable the SO_BROADCAST socket option. If you’re building a sandboxed app on the Mac, working with UDP requires both the com.apple.security.network.client and com.apple.security.network.server entitlements. Some folks reach for broadcasts or multicasts because they’re sending the same content to multiple devices and they believe that it’ll be faster than unicasts. That’s not true in many cases, especially on Wi-Fi. For more on this, see the Broadcasts section of Wi-Fi Fundamentals. Snippets To send a UDP broadcast: func broadcast(message: Data, to interfaceName: String) throws { let fd = try FileDescriptor.socket(AF_INET, SOCK_DGRAM, 0) defer { try! fd.close() } try fd.setSocketOption(SOL_SOCKET, SO_BROADCAST, 1 as CInt) let interfaceIndex = if_nametoindex(interfaceName) guard interfaceIndex > 0 else { throw … } try fd.setSocketOption(IPPROTO_IP, IP_BOUND_IF, interfaceIndex) try fd.send(data: message, to: ("255.255.255.255", 2222)) } Note These snippet uses the helpers from Calling BSD Sockets from Swift. To receive UDP broadcasts: func receiveBroadcasts(from interfaceName: String) throws { let fd = try FileDescriptor.socket(AF_INET, SOCK_DGRAM, 0) defer { try! fd.close() } let interfaceIndex = if_nametoindex(interfaceName) guard interfaceIndex > 0 else { fatalError() } try fd.setSocketOption(IPPROTO_IP, IP_BOUND_IF, interfaceIndex) try fd.setSocketOption(SOL_SOCKET, SO_REUSEADDR, 1 as CInt) try fd.setSocketOption(SOL_SOCKET, SO_REUSEPORT, 1 as CInt) try fd.bind("0.0.0.0", 2222) while true { let (data, (sender, port)) = try fd.receiveFrom() … } } IMPORTANT This code runs synchronously, which is less than ideal. In a real app you’d run the receive asynchronously, for example, using a Dispatch read source. For an example of how to do that, see this post. If you need similar snippets for multicast, lemme know. I’ve got them lurking on my hard disk somewhere (-: Other Resources Apple’s official documentation for BSD Sockets is in the man pages. See Reading UNIX Manual Pages. Of particular interest are: setsockopt man page ip man page ip6 man page If you’re not familiar with BSD Sockets, I strongly recommend that you consult third-party documentation for it. BSD Sockets is one of those APIs that looks simple but, in reality, is ridiculously complicated. That’s especially true if you’re trying to write code that works on BSD-based platforms, like all of Apple’s platforms, and non-BSD-based platforms, like Linux. I specifically recommend UNIX Network Programming, by Stevens et al, but there are lots of good alternatives. https://unpbook.com Revision History 2025-09-01 Fixed a broken link. 2025-01-16 First posted.

Starting in iOS 26, two notable changes have been made to CallKit, LiveCommunicationKit, and the PushToTalk framework: As a diagnostic aid, we're introducing new dialogs to warn apps of voip push related issue, for example when they fail to report a call or when when voip push delivery stops. The specific details of that behavior are still being determined and are likely to change over time, however, the critical point here is that these alerts are only intended to help developers debug and improve their app. Because of that, they're specifically tied to development and TestFlight signed builds, so the alert dialogs will not appear for customers running app store builds. The existing termination/crashes will still occur, but the new warning alerts will not appear. As PushToTalk developers have previously been warned, the last unrestricted PushKit entitlement ("com.apple.developer.pushkit.unrestricted-voip.ptt") has been disabled in the iOS 26 SDK. ALL apps that link against the iOS 26 SDK which receive a voip push through PushKit and which fail to report a call to CallKit will be now be terminated by the system, as the API contract has long specified. __ Kevin Elliott DTS Engineer, CoreOS/Hardware

I'm using NERelayManager to set Relay configuration which all works perfectly fine. I then do a curl with the included domain and while I see QUIC connection succeeds with relay server and H3 request goes to the server, the connection gets abruptly closed by the client with "Software caused connection abort". Console has this information: default 09:43:04.459517-0700 curl nw_flow_connected [C1.1.1 192.168.4.197:4433 in_progress socket-flow (satisfied (Path is satisfied), viable, interface: en0[802.11], ipv4, ipv6, dns, uses wifi)] Transport protocol connected (quic) default 09:43:04.459901-0700 curl [C1.1.1 192.168.4.197:4433 in_progress socket-flow (satisfied (Path is satisfied), viable, interface: en0[802.11], ipv4, ipv6, dns, uses wifi)] event: flow:finish_transport @0.131s default 09:43:04.460745-0700 curl nw_flow_connected [C1.1.1 192.168.4.197:4433 in_progress socket-flow (satisfied (Path is satisfied), viable, interface: en0[802.11], ipv4, ipv6, dns, uses wifi)] Joined protocol connected (http3) default 09:43:04.461049-0700 curl [C1.1.1 192.168.4.197:4433 in_progress socket-flow (satisfied (Path is satisfied), viable, interface: en0[802.11], ipv4, ipv6, dns, uses wifi)] event: flow:finish_transport @0.133s default 09:43:04.465115-0700 curl [C2 E47A3A0C-7275-4F6B-AEDF-59077ABAE34B 192.168.4.197:4433 quic, multipath service: 1, tls, definite, attribution: developer] cancel default 09:43:04.465238-0700 curl [C2 E47A3A0C-7275-4F6B-AEDF-59077ABAE34B 192.168.4.197:4433 quic, multipath service: 1, tls, definite, attribution: developer] cancelled [C2 FCB1CFD1-4BF9-4E37-810E-81265D141087 192.168.4.139:53898<->192.168.4.197:4433] Connected Path: satisfied (Path is satisfied), viable, interface: en0[802.11], ipv4, ipv6, dns, uses wifi Duration: 0.121s, QUIC @0.000s took 0.000s, TLS 1.3 took 0.111s bytes in/out: 2880/4322, packets in/out: 4/8, rtt: 0.074s, retransmitted bytes: 0, out-of-order bytes: 0 ecn packets sent/acked/marked/lost: 3/1/0/0 default 09:43:04.465975-0700 curl nw_flow_disconnected [C2 192.168.4.197:4433 cancelled multipath-socket-flow ((null))] Output protocol disconnected default 09:43:04.469189-0700 curl nw_endpoint_proxy_receive_report [C1.1 IPv4#124bdc4d:80 in_progress proxy (satisfied (Path is satisfied), interface: en0[802.11], ipv4, ipv6, dns, proxy, uses wifi)] Privacy proxy failed with error 53 ([C1.1.1] masque Proxy: http://192.168.4.197:4433) default 09:43:04.469289-0700 curl [C1.1.1 192.168.4.197:4433 failed socket-flow (satisfied (Path is satisfied), viable, interface: en0[802.11], ipv4, ipv6, dns, uses wifi)] event: flow:failed_connect @0.141s, error Software caused connection abort Relay server otherwise works fine with our QUIC MASQUE clients but not with built-in macOS MASQUE client. Anything I'm missing?

I want to track down which part of an app contacts a given domain listed in its App Privacy Report. Following the instructions given here I am able to capture a packet trace, but traffic to the domain in question is encrypted using QUIC. Is there a way to insert e.g. mitmproxy into the capture process in order to get hold of the SSLKEYLOGFILE so that I can decrypt the traffic?

HI, I am currently developing an app that utilizes Wi-Fi Aware. According to the Wi-Fi Aware framework examples and the WWDC25 session on Wi-Fi Aware, discovery is handled using DevicePairingView and DevicePicker from the DeviceDiscoveryUI module. However, these SwiftUI views present their connection UI modally when tapped. My app's design requires the ability to control the presentation of this UI programmatically, rather than relying on a user tap. While inspecting the DeviceDiscoveryUI module, I found DDDevicePairingViewController and DDDevicePickerViewController, which appear to be the UIViewController counterparts to the SwiftUI views. The initializer for DDDevicePairingViewController accepts a ListenerProvider, so it seems I can pass the same ListenerProvider instance that is used with the DevicePairingView. However, the initializer for DDDevicePickerViewController requires an NWBrowser.Descriptor, which seems incompatible with the parameters used for the SwiftUI DevicePicker. I have two main questions: (1) Can DDDevicePairingViewController and DDDevicePickerViewController be officially used for Wi-Fi Aware pairing? (2) Are there any plans to provide more customization or programmatic control over the DevicePairingView and DevicePicker (for example, allowing us to trigger their modal presentation programmatically)? Thank you.

ios構成プロファイルの制限のallowCloudPrivateRelayのプライベートリレーの制御とRelayペイロードの機能は関係がありますか？ それとも別々の機能でしょうか？ ↓ s there a relationship between the private relay control in the iOS configuration profile restriction allowCloudPrivateRelay and the functionality of the Relay payload? Or are they separate features?

Hello, I have a few questions regarding URL Filter (iOS 26) and Content Filter Providers. URL Filter According to the WWDC26 video, URL Filter appears to be available for both consumer and enterprise deployments. This seems consistent with the classic Network Extension Provider Deployment documentation (TN3134 – August 2025), where no specific deployment restriction is mentioned. However, a more recent document (Apple Platform Deployment, September 2025) indicates the following for URL Filter: “Requires supervision on iPhone, iPad and Mac” (with a green checkmark). 👉 My question: Is URL Filter actually available for consumer use on non-supervised iPhones (deployed on Testflight and AppStore), or is supervision now required? Content Filter Providers From past experience, I remember that Content Filter Providers were only available on supervised devices. Based on the current documentation, I am questioning their usability in a consumer context, i.e. on non-supervised iPhones. In the Network Extension Provider Deployment documentation, it is stated that this is a Network Extension and that, since iOS 16, it is a “per-app on managed device” restriction. In the more recent Apple Platform Deployment document, it states for iPhone and iPad: “App needs to be installed on the user’s iOS and iPadOS device and deletion can be prevented if the device is supervised.” 👉 My understanding: Supervised device: The Content Filter Provider is installed via a host application that controls enabling/disabling the filter, and the host app can be prevented from being removed thanks to supervision. Non-supervised device: The Content Filter Provider is also installed via a host application that controls enabling/disabling the filter, but the app can be removed by the user, which would remove the filter. 👉 My question: Can Content Filter Providers be used in a consumer context on non-supervised iPhones (deployed on Testflight and AppStore), accepting that the user can uninstall the host app (and therefore remove the filter)? Thank you in advance for your feedback. Sources: TN3134 => TN3134: Network Extension provider deployment | Apple Developer Documentation Apple Platform Deployment / Filter content for Apple devices => https://support.apple.com/en-gb/guide/deployment/dep1129ff8d2/1/web/1.0

On "Accessory Interface Specification CarPlay Addendum R10", it says that it is recommended that the accessory uses a MIMO (2x2) hardware configuration, does this imply that WiFi 5 and SISO (1X1) will be phased out in the near future? When will WiFi 6 MIMO (2x2) become mandatory? On "Accessory Interface Specification CarPlay Addendum R10", it says that Spatial Audio is mandatory. However, for aftermarket in-vehicle infotainment (IVI) system due to the number of speakers are less than 6, is it allowed not to support spatial audio for this type of aftermarket IVI system?

Every now and again folks notice that Network framework seems to create an unexpected number of connections on the wire. This post explains why that happens and what you should do about it. If you have questions or comments, put them in a new thread here on the forums. Use the App & System Services > Networking topic area and the Network tag. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" Understanding Also-Ran Connections Network framework implements the Happy Eyeballs algorithm. That might create more on-the-wire connections than you expect. There are two common places where folks notice this: When looking at a packet trace When implementing a listener Imagine that you’ve implemented a TCP server using NWListener and you connect to it from a client using NWConnection. In many situations there are multiple network paths between the client and the server. For example, on a local network there’s always at least two paths: the link-local IPv6 path and either an infrastructure IPv4 path or the link-local IPv4 path. When you start your NWConnection, Network framework’s Happy Eyeballs algorithm might [1] start a TCP connection for each of these paths. It then races those connections. The one that connects first is the ‘winner’, and Network framework uses that connection for your traffic. Once it has a winner, the other connections, the also-ran connections, are redundant, and Network framework just closes them. You can observe this behaviour on the client side by looking in the system log. Many Network framework log entries (subsystem com.apple.network) contain a connection identifier. For example C8 is the eighth connection started by this process. Each connection may have child connections (C8.1, C8.2, …) and grandchild connections (C8.1.1, C8.1.2, …), and so on. You’ll see state transitions for these child connections occurring in parallel. For example, the following log entries show that C8 is racing the connection of two grandchild connections, C8.1.1 and C8.1.2: type: debug time: 12:22:26.825331+0100 process: TestAlsoRanConnections subsystem: com.apple.network category: connection message: nw_socket_connect [C8.1.1:1] Calling connectx(…) type: debug time: 12:22:26.964150+0100 process: TestAlsoRanConnections subsystem: com.apple.network category: connection message: nw_socket_connect [C8.1.2:1] Calling connectx(…) Note For more information about accessing the system log, see Your Friend the System Log. You also see this on the server side, but in this case each connection is visible to your code. When you connect from the client, Network framework calls your listener’s new connection handler with multiple connections. One of those is the winning connection and you’ll receive traffic on it. The others are the also-ran connections, and they close promptly. IMPORTANT Depending on network conditions there may be no also-ran connections. Or there may be lots of them. If you want to test the also-ran connection case, use Network Link Conditioner to add a bunch of delay to your packets. You don’t need to write special code to handle also-ran connections. From the perspective of your listener, these are simply connections that open and then immediately close. There’s no difference between an also-ran connection and, say, a connection from a client that immediately crashes. Or a connection generated by someone doing a port scan. Your server must be resilient to such things. However, the presence of these also-ran connections can be confusing, especially if you’re just getting started with Network framework, and hence this post. [1] This is “might” because the exact behaviour depends on network conditions. More on that below.

Hi all, I work on a smart product that, for setup, uses a captive portal to allow users to connect and configure the device. It emits a WiFi network and runs a captive portal - an HTTP server operates at 10.0.0.1, and a DNS server responds to all requests with 10.0.0.1 to direct "any and all" request to the server. When iOS devices connect, they send a request to captive.apple.com/hotspot-detect.html; if it returns success, that means they're on the internet; if not, the typical behavior in the past has been to assume you're connected to a captive portal and display what's being served. I serve any requests to /hotspot-detect.html with my captive portal page (index.html). This has worked reliably on iOS18 for a long time (user selects my products WiFi network, iOS detects portal and opens it). But almost everyone who's now trying with iOS26 is having the "automatic pop up" behavior fail - usually it says "Error opening page - Hotspot login cannot open the page because the network connection was lost." However, if opening safari and navigating to any URL (or 10.0.0.1) the portal loads - it's just the iOS auto-detect and open that's not working iOS18 always succeeds; iOS26 always fails. Anybody have any idea what changes may have been introduced in iOS26 on this front, or anything I can do to help prompt or coax iOS26 into loading the portal? It typically starts reading, but then stops mid-read.

Hey there Are there any recommendations or guidance for apps on alternatives to certificate pinning to secure their device network traffic? I want to move away from the overhead and risk associated with rotating certificates when using leaf pinning. However, I also don't want people to be able to perform a MITM attack easily using something like Charles Proxy with a self‑signed certificate added to the trust store. My understanding is that an app cannot distinguish between user‑trusted certificates and system‑trusted certificates in the trust store, so it cannot block traffic that uses user‑trusted certificates.

Hello, I understand that to discover and pair a device or accessory with Wi-Fi Aware, we can use either the DeviceDiscoveryUI or AccessorySetupKitUI frameworks. During the pairing process, both frameworks prompt the user to enter a pairing code. Is this step mandatory? What alternatives exist for devices or accessories that don't have a way to communicate a pairing code to the user (for example, devices or accessories without a display or voice capability)? Best regards, Gishan