I am developing an iOS application that utilizes running workout data from the iOS Health app / Fitness app via HealthKit, with explicit user permission. Before finalizing the app design, I would like to clarify several technical aspects related to data reliability, manual entry, record modification, and GPS route availability in HealthKit. My questions are as follows: 1. Identifying manually added (non-physical) running workouts When a running workout is created in the Health app without actual physical movement (for example, a workout manually added by the user), is there any metadata, flag, or key in HealthKit that allows developers to distinguish these records from workouts generated through actual motion tracking (iPhone or Apple Watch)? 2. Editing existing running workout records Is it possible for users, or for third-party apps with HealthKit write permission, to edit an existing running workout (e.g., distance, duration, calories) after it has been saved? • If edits are allowed, are the original values preserved in any way, or are they fully overwritten? 3. Detecting modified workout records If a running workout (whether originally auto-recorded or manually created) has been edited after creation, is there any identifier, metadata field, source revision, or versioning mechanism in HealthKit that allows developers to detect that the workout has been modified? 4. Access to GPS route / running path data For outdoor running workouts recorded with location services enabled: • Does HealthKit provide access to GPS route data (running paths / location traces) associated with a workout? • Is this route data accessible to third-party apps with user permission? • Is route data available only for workouts recorded on Apple Watch, or also for iPhone-only recordings? • Is there a way to determine programmatically whether a running workout includes valid GPS route data? The overall goal is to understand whether, when building an app that relies on HealthKit running data, it is technically possible to differentiate motion-based workouts from manually added or edited records, and to assess the availability of route information for outdoor runs. Any clarification or references to official documentation would be greatly appreciated. Thank you

Hello everyone, I’m experiencing a visual issue when dismissing a sheet on iOS 26. I’m using the same implementation shown in the official Apple documentation. While testing, I noticed that some apps do not exhibit this behavior. However, when running this code on iOS 26, the issue consistently occurs. Issue description: The sheet dismisses abruptly A white screen briefly appears for a few milliseconds and then disappears This results in a noticeable visual glitch and a poor user experience I tested the exact same code on iOS 18, where the sheet dismisses smoothly and behaves as expected, without any visual artifacts. Has anyone else encountered this issue on iOS 26? Is this a known bug, or is there a recommended workaround? Any insights would be greatly appreciated. Thank you.

HealthKit background delivery only triggers when charging. I have set step monitoring to hourly frequency. Despite step changes, callbacks fail to arrive after 3-4 hours on battery, but trigger immediately upon connecting power. Observed for 2 days: background updates are only received when charging. The device is not in Low Power Mode, and Background App Refresh is enabled for the app in Settings.

Why can I use background delivery to realize background notifications when I run the app for the first time, but when I delete the app running in the background, and then reopen the app to run it in the background, there will be no background notification when the data changes?

In the WWDC 2019 session "Extended Runtime for WatchOS apps" the video talks about an entitlement being required to use the HR sensor judiciously in the background. It provides a link to request the entitlement which no longer works: http://developer.apple.com/contect/request/health-monitoring The session video is also quite hard to find these days. Does anyone know why this is the case? Is the API and entitlement still available? Is there a supported way to run, even periodically, in the background on the Watch app (ignoring the background observer route which is known to be unreliable) and access existing HR sensor data

I'm trying to run this example project: https://developer.apple.com/documentation/HealthKit/building-a-multidevice-workout-app When I run it on my device (iPhone 16 Pro and Apple Watch Ultra 2) I get this error: -[SPRemoteInterface _appRecoverAnyExtendedRuntimeSession:]_block_invoke:4350: Got no sessions back from -[CSLSSessionService existingRunningSessions:] or -[CSLSSessionService existingScheduledSessions:] after receiving a PUICInitializeSessionServiceAction I start the workout from my phone, which successfully starts the workout on the watch. But this callback is never triggered on the phone: healthStore.workoutSessionMirroringStartHandler { // not happening } This makes it difficult to learn the mirroring workout technique. I'm using Xcode 16.3 and Mac OS 15.4.1. Any help appreciated!

Hello, I have enabled HealthKit background delivery for sleep analysis samples: private func setupSleepDataBackgroundDelivery() { if let sleepType = HKObjectType.categoryType(forIdentifier: HKCategoryTypeIdentifier.sleepAnalysis) { healthStore.enableBackgroundDelivery(for: sleepType, frequency: .immediate) { (success, error) in } } } In general, this function works. But I would love to know what the limitations / expected delivery delay for frequency: .immediate is. The documentation is only very vague about this and specifies that some sample types such as steps are only delivered once per hour. But how about sleep data? Is this expected to be delivered immediately once available on iPhone? Thanks a lot for your help!

I am very happy to see that HealthKit with OS26 is bringing HKLiveWorkoutDataSource to iOS and iPadOS. I have been replicating a similar type for the last several years for users that only have an iPhone. I did notice that the data types that the different platform data sources collect automatically is different. That makes sense if you think exclusively about what the device can actually capture. Bluetooth HRM is the only Bluetooth SIG profile that is out-of-the-box supported for Apple Health on iOS and iPadOS (right?). Whereas watchOS 10 got all of the cycling sensors (woohoo!). It would be great if the types to collect were the same across platforms even if the device couldn't collect the data now, because then in the future when / if new sensor support is added, it will be transparent to developers. Fantastic. Easier life as an indie / third party developer. At least that is the idea. And yes, I know I can also write Core Bluetooth code and roll my own SIG implementation for the cycling profiles, but Apple already has this code in one os, 'just copy it, it will be easy'. I know that isn't the reality especially against the new ASK framework, but one can hope and dream right? Imagine how many more apps would contribute that data if it was supported out of the box. An alternative, GitHub is a great place for Apple to share their Core Bluetooth implementation of the SIG profiles :). Just another thought. Here are some feedbacks related to this: FB17931751 - HealthKit: Add built-in support for cycling sensors on iOS and iPadOS - copy paste the code from watchOS. It will be easy they said (June 2025) FB12323089 - CoreBluetooth / Health / Bluetooth Settings: Add support for cycling sensors announced in watchOS 10 to iOS and iPadOS 17 (June 2023) FB14311218 - HealthKit: Expected outdoor cycling to include .cyclingSpeed quantity type as a default HKLiveWorkoutDataSource type to collect (July 2024) FB14978701 - Bluetooth / HealthKit / Fitness: Expose information about the user specified for Apple Watch paired Cycing Speed Sensor like isConnected and wheelCircumference values (August 2024) FB18402258 - HealthKit: HKLiveWorkoutDataSource should collect same types on iOS and watchOS even if device cannot produce data today (June 2025) FB14236080 - Developer Documentation / HealthKit: Update documentation for HKLiveWorkoutDataSource typesToCollect for which sample types are automatically collected by watchOS 10 and 11 (July 2024) Tangentially related: FB10281304 - HealthKit: Add HKActivityTypes canoeBikeRun and kayakBikeRun (June 2022) FB10281349 - HealthKit: Add HKActivityType walkCanoeWalk and walkKayakWalk (June 2022) FB7807993 - Add HKQuantityTypeIdentifier.paddleDistance for canoeing, kayaking, etc type workouts (June 2020) FB12508654 - HealthKit / Settings / Bluetooth / Workouts: Cycling sensor support doesn't allow for 'bike selection' in use case of multiple bikes and multiple sensors (borrow a bike to ride together) - production usability issue (July 2023)

I don’t get the workout buddy on my Apple Watch series 10, paired to an iPhone 16 running iOS 26 Beta 2

HealthKit is currently not supported on macOS nor tvOS, despite being supported by visionOS. Support for macOS was last asked about[1] here in 2018. My goal is to display interactive data visualisations over workouts collected in HealthKit on macOS. Will this be possible to do in the near future using HealthKit directly? If not, can I somehow read the information from an iPhone and display it on the mac? Cheers, Rodrigo [1] https://developer.apple.com/forums/thread/94937

Hi, I have a workout app in the App Store which mirrors workout data between the phone and watch. Since iOS 26.x I've been having issues and received reports of the mirroring no longer working. Users in iOS 18 have no problems with this functionality. Bug description: A workout session is started from the phone app and starts mirroring to the watch companion device. The watch starts the workout session and then the mirroring session is disconnected / lost. Sending data to the companion device fails and ending the session on the phone doesn't end the session on the watch...essentially they become completely disconnected. Please note I am testing this on physical devices...not simulators. As a sanity check I've also tried the "Building a multidevice workout app" sample code and it has the same problem. To re-create on the sample app, I start a workout from the phone, the watch workout starts and then the mirroring session seems to disconnect and is unable to send data. This is the log from the "Building a multidevice workout app" sample code. Successfully started workout Type: Notice | Timestamp: 2025-10-17 06:57:07.341401+02:00 | Process: MirroringWorkoutsSample Watch App | Library: MirroringWorkoutsSample Watch App.debug.dylib | Subsystem: com.example.apple-samplecode.MirroringWorkoutsSampleABC123.watchkitapp | Category: MirroringWorkoutsSampleForWatch | TID: 0x1b2ca7 -[SPRemoteInterface _appRecoverAnyExtendedRuntimeSession:]_block_invoke:4350: Got no sessions back from -[CSLSSessionService existingRunningSessions:] or -[CSLSSessionService existingScheduledSessions:] after receiving a PUICInitializeSessionServiceAction Type: Error | Timestamp: 2025-10-17 06:57:07.641571+02:00 | Process: MirroringWorkoutsSample Watch App | Library: WatchKit | Subsystem: com.apple.watchkit | Category: default | TID: 0x1b2ca7 Session state changed from 1 to 2 Type: Notice | Timestamp: 2025-10-17 06:57:07.647883+02:00 | Process: MirroringWorkoutsSample Watch App | Library: MirroringWorkoutsSample Watch App.debug.dylib | Subsystem: com.example.apple-samplecode.MirroringWorkoutsSampleABC123.watchkitapp | Category: MirroringWorkoutsSampleForWatch | TID: 0x1b2e87 Failed to send data: Error Domain=com.apple.healthkit Code=100 "Failed to send data to remote session." UserInfo={NSLocalizedDescription=Failed to send data to remote session.} Type: Notice | Timestamp: 2025-10-17 06:57:07.669922+02:00 | Process: MirroringWorkoutsSample Watch App | Library: MirroringWorkoutsSample Watch App.debug.dylib | Subsystem: com.example.apple-samplecode.MirroringWorkoutsSampleABC123.watchkitapp | Category: MirroringWorkoutsSampleForWatch | TID: 0x1b2ca7 Would appreciate any help with this problem as it's affecting customers. Thank you

After upgrading to a new iPhone and restoring from an iCloud backup using the same Apple ID, I noticed an issue with Health app permissions. ■ What is happening On my previous iPhone, an app had permission to read step count data. After restoring to the new iPhone, the app still appears in the Health app under Sources. However, when I tap the app, the usual data type permission toggles (such as Steps) are not displayed at all. As a result, the app is unable to read step count data. ■ Additional details The app itself seems to be recognized as a Health data source. However, the data type permission screen is empty. No ON/OFF switches are shown. The backup was created on iOS 18, and the restore was performed on iOS 26. I have not yet confirmed whether this also happens with other iOS version combinations. ■ Questions Is it expected behavior that Health app permissions (per data type) are not restored via iCloud backup? Has anyone experienced a similar situation where the app appears under Sources but the permission options are missing? If so, how did you resolve it? Any information from users who have experienced the same issue would be greatly appreciated.

Hello, I’m building a health-related app for both watchOS and iOS, which needs to monitor certain health data (e.g., heart rate, active energy). Before updating to watchOS 26, the queries worked reliably without any issues. However, after adapting to watchOS 26, some users have reported that health data updates stop being delivered. What I’ve observed: HKObserverQuery with enableBackgroundDelivery is set up normally. On WatchOS 26, the query sometimes stops delivering updates entirely after a certain point, and once an update is missed, it may stop delivering further updates completely. Restarting the Apple Watch temporarily restores delivery, but the problem reoccurs after some time. This makes background health data monitoring unreliable for my app. Here’s a simplified version of the code we are using: guard let heartType = HKObjectType.quantityType(forIdentifier: .heartRate) else { return } let query = HKObserverQuery(sampleType: heartType, predicate: nil) { query, completionHandler, error in if let error = error { logEvent("Observer error: \(error.localizedDescription)") return } logEvent("Heart rate changed") MyNotificationManager.shared.sendNotification() // Send a local notification completionHandler() } healthStore.execute(query) healthStore.enableBackgroundDelivery(for: heartType, frequency: .hourly) { success, error in if success { logEvent("Background heart rate delivery enabled") } else { logEvent("Failed to enable background heart rate delivery: \(error?.localizedDescription ?? "Unknown error")") } } Could you please clarify: Is this a known issue with HKObserverQuery and enableBackgroundDelivery on watchOS 26? Are there any recommended workarounds or best practices to ensure continuous background delivery of health data? Thank you in advance for your help.

WorkoutKit WorkoutScheduler seems broken with the first beta of iOS 18.2. I have tested using my app from Xcode and the one that is on the App Store (and working properly on other devices), and it's not working with this new beta of iOS. They appears in WorkoutScheduler.shared.scheduledWorkouts, but not on the watch. I even tried with other apps that do the same with Manual add to Apple Watch with SwiftUI workoutPreview work. Xcode 16.0 iOS 18.2 Beta 1 WatchOS 11.1