I am working on a cycling fitness app and I want to read the cycling power recorded using my Garmin edge from the Garmin Connect App. Currently the data is not transferred to the Health/Fitness Apps. Ideally it would be good to be able to query the power samples similar to the heart rate samples, but even the average power would suffice, as I could then calculate the Kilojoules.

Can’t get the live data from ppg sensor (se os 26.x) for 0 latency parsing of haptics per each pulse (heart beat). any help would be cool. b

Hi, I have a workout app in the App Store which mirrors workout data between the phone and watch. Since iOS 26.x I've been having issues and received reports of the mirroring no longer working. Users in iOS 18 have no problems with this functionality. Bug description: A workout session is started from the phone app and starts mirroring to the watch companion device. The watch starts the workout session and then the mirroring session is disconnected / lost. Sending data to the companion device fails and ending the session on the phone doesn't end the session on the watch...essentially they become completely disconnected. Please note I am testing this on physical devices...not simulators. As a sanity check I've also tried the "Building a multidevice workout app" sample code and it has the same problem. To re-create on the sample app, I start a workout from the phone, the watch workout starts and then the mirroring session seems to disconnect and is unable to send data. This is the log from the "Building a multidevice workout app" sample code. Successfully started workout Type: Notice | Timestamp: 2025-10-17 06:57:07.341401+02:00 | Process: MirroringWorkoutsSample Watch App | Library: MirroringWorkoutsSample Watch App.debug.dylib | Subsystem: com.example.apple-samplecode.MirroringWorkoutsSampleABC123.watchkitapp | Category: MirroringWorkoutsSampleForWatch | TID: 0x1b2ca7 -[SPRemoteInterface _appRecoverAnyExtendedRuntimeSession:]_block_invoke:4350: Got no sessions back from -[CSLSSessionService existingRunningSessions:] or -[CSLSSessionService existingScheduledSessions:] after receiving a PUICInitializeSessionServiceAction Type: Error | Timestamp: 2025-10-17 06:57:07.641571+02:00 | Process: MirroringWorkoutsSample Watch App | Library: WatchKit | Subsystem: com.apple.watchkit | Category: default | TID: 0x1b2ca7 Session state changed from 1 to 2 Type: Notice | Timestamp: 2025-10-17 06:57:07.647883+02:00 | Process: MirroringWorkoutsSample Watch App | Library: MirroringWorkoutsSample Watch App.debug.dylib | Subsystem: com.example.apple-samplecode.MirroringWorkoutsSampleABC123.watchkitapp | Category: MirroringWorkoutsSampleForWatch | TID: 0x1b2e87 Failed to send data: Error Domain=com.apple.healthkit Code=100 "Failed to send data to remote session." UserInfo={NSLocalizedDescription=Failed to send data to remote session.} Type: Notice | Timestamp: 2025-10-17 06:57:07.669922+02:00 | Process: MirroringWorkoutsSample Watch App | Library: MirroringWorkoutsSample Watch App.debug.dylib | Subsystem: com.example.apple-samplecode.MirroringWorkoutsSampleABC123.watchkitapp | Category: MirroringWorkoutsSampleForWatch | TID: 0x1b2ca7 Would appreciate any help with this problem as it's affecting customers. Thank you

Hi everyone, we’re developing an app that lets users export selected bike rides to the HealthKit ecosystem. We created our app icon using the Apple Icon Composer and referenced the composer file in Xcode. Everything works fine, except that the logo doesn’t appear correctly in the Fitness app. Has anyone experienced this issue or knows how to fix it?

I am the developer of a workout app that allows users to create interval programs (e.g. Warm Up, Fast, Cool Down). It is possible for me to store the data for the intervals along with the workout in the Health system by using WorkoutKit (or any other method)? My aim is to make it so that the Fitness app shows the interval details when users view workouts created by my app. Thanks in advance.

HealthKit is currently not supported on macOS nor tvOS, despite being supported by visionOS. Support for macOS was last asked about[1] here in 2018. My goal is to display interactive data visualisations over workouts collected in HealthKit on macOS. Will this be possible to do in the near future using HealthKit directly? If not, can I somehow read the information from an iPhone and display it on the mac? Cheers, Rodrigo [1] https://developer.apple.com/forums/thread/94937

I am using this below code since WatchOS 10 to set the user steps observer and get the callback of steps whenever changes. This is still working perfectly fine till watchOS 11 but when i updated to watchOS 26.1, I am not getting the callback of steps, like the observer is not working at all. I should get a callback inside query block whenever user take steps, but it is not working in watchOS 26.1. func setupStepCountObserver(completion: @escaping (Double, Double) -> Void) { let stepCountType = HKObjectType.quantityType(forIdentifier: .stepCount)! let query = HKObserverQuery(sampleType: stepCountType, predicate: nil) { [weak self] _, completionHandler, error in if let error = error { print("Error setting up observer query: \(error.localizedDescription)") return } // Fetch the latest step count data self?.getLast20SecTodaysSteps(completion: completion) // Call the completion handler to let HealthKit know you have processed the update completionHandler() } // Execute the query healthStore.execute(query) // Enable background delivery of updates healthStore.enableBackgroundDelivery(for: stepCountType, frequency: .immediate) { success, error in if let error = error { print("Error enabling background delivery steps: \(error.localizedDescription)") } else if success { print("Background delivery enabled for steps.") } } }

Ever since upgrading to OS 26.1, I've noticed that HealthKit anchored object queries seem to be much slower-updating than normal. I was curious if Apple stated anything explicitly changed on this front? I use anchored object queries to update some of the workout metrics that HKLiveWorkoutBuilder doesn't report (like stepCount).

When calling beginCollection on HKLiveWorkoutBuilder the function never completes and gets stuck. (On the second workout session, the first session works flawlessly) To reproduce: Run the MirroringWorkoutsSample on WatchOS https://developer.apple.com/documentation/healthkit/building-a-multidevice-workout-app. Start the workout and then end the workouts it should work perfectly fine the first time. Start the workout and end again, and you should see the problem, the workout doesn’t end.

Was able to use ai to help code my idea for a haptic heart rate monitor using watch se‘s ppg and accelerometer. Now if I could just get it on the App Store…

The second time i start a workout session, the beginCollection instance method on HKLiveWorkoutBuilder freezes. To recreate run the Apple Sample Project Building a multidevice workout app. It looks like a bug with the HealthKit SDK and not the code but i could be wrong. The only workaround i found was erasing the simulator and reinstalling the app.

We are seeing an issue where sending data using the asynchronous method HKWorkoutSession.sendToRemoteWorkoutSession(data: Data) will never return in some cases (no success nor failure). This issue is happening for roughly 5% of Workouts started and will stay broken for the whole workout. The other 95% of the workouts, the connection works flawlessly. This happens on both watchOS 10 and 11, and with phones running iOS 17 or 18. The issue is quite random and not reproducible. Our app has thousands of workouts a day that use the workout session workout data send, with constant messages being send every few seconds. In some of those 5% cases the "sendToRemoteWorkoutSession" will throw way later, like 30+ minutes later, if the watch app is awake long enough to capture a log of a failure. Our code uses the same flow as in the sample project: https://developer.apple.com/documentation/healthkit/workouts_and_activity_rings/building_a_multidevice_workout_app Here is some sample code, which is pretty simple. Setup code: let workoutSession = try HKWorkoutSession(healthStore: healthStore, configuration: configuration) workoutSession.delegate = self activeWorkoutSession?.startMirroringToCompanionDevice { success, error in print("Mirroring started on companion device: \(success), error: \(error)") } workoutSession?.prepare() then later we send data using the workout session: do { print("Will send data") try await workoutSession.sendToRemoteWorkoutSession(data: data) print("Successfully sent data") // This nor the error may be called after waiting extensive amounts of time } catch { print("Failed to send data, error: \(error)") // This nor the success may be called after waiting extensive amounts of time } So far, the only fix is to restart the phone and watch at the same time, which is not a great user experience. Is anyone else seeing this issue? or know how to fix this issue?

I am developing a running training app that coaches can use to create interval workout plans. I can use HKWorkout to get information about Splits similar to that in Fitness app, but I can't get information about Intervals. My idea is to show interval details when users view their completed custom interval workout plans. Can I use Healthkit (or another feasible method) to get the actual distance or time of exercise in intervals workout ? (I know the workoutPlan property, but it doesn't reflect the segments of a real interval training workout.) Any insights or suggestions would be greatly appreciated! Thanks in advance!

Hi! I have over 800 days strike in closing my move circle. However oerfect month badge is not popping up for November, we have now mid of Dec and still no update. I updated iOS to 26, did multiple resets and hard resets and still no badge. I checked many forums and post but any of given tips is working in my case. i know it sounds funny, but it’s frustrating that I’m not getting this little gold medal to keep me motivated 😅 does anyone know how to deal with it? Is it common issue?

I am developing an iOS application that utilizes running workout data from the iOS Health app / Fitness app via HealthKit, with explicit user permission. Before finalizing the app design, I would like to clarify several technical aspects related to data reliability, manual entry, record modification, and GPS route availability in HealthKit. My questions are as follows: 1. Identifying manually added (non-physical) running workouts When a running workout is created in the Health app without actual physical movement (for example, a workout manually added by the user), is there any metadata, flag, or key in HealthKit that allows developers to distinguish these records from workouts generated through actual motion tracking (iPhone or Apple Watch)? 2. Editing existing running workout records Is it possible for users, or for third-party apps with HealthKit write permission, to edit an existing running workout (e.g., distance, duration, calories) after it has been saved? • If edits are allowed, are the original values preserved in any way, or are they fully overwritten? 3. Detecting modified workout records If a running workout (whether originally auto-recorded or manually created) has been edited after creation, is there any identifier, metadata field, source revision, or versioning mechanism in HealthKit that allows developers to detect that the workout has been modified? 4. Access to GPS route / running path data For outdoor running workouts recorded with location services enabled: • Does HealthKit provide access to GPS route data (running paths / location traces) associated with a workout? • Is this route data accessible to third-party apps with user permission? • Is route data available only for workouts recorded on Apple Watch, or also for iPhone-only recordings? • Is there a way to determine programmatically whether a running workout includes valid GPS route data? The overall goal is to understand whether, when building an app that relies on HealthKit running data, it is technically possible to differentiate motion-based workouts from manually added or edited records, and to assess the availability of route information for outdoor runs. Any clarification or references to official documentation would be greatly appreciated. Thank you

Hello everyone, I’m experiencing a visual issue when dismissing a sheet on iOS 26. I’m using the same implementation shown in the official Apple documentation. While testing, I noticed that some apps do not exhibit this behavior. However, when running this code on iOS 26, the issue consistently occurs. Issue description: The sheet dismisses abruptly A white screen briefly appears for a few milliseconds and then disappears This results in a noticeable visual glitch and a poor user experience I tested the exact same code on iOS 18, where the sheet dismisses smoothly and behaves as expected, without any visual artifacts. Has anyone else encountered this issue on iOS 26? Is this a known bug, or is there a recommended workaround? Any insights would be greatly appreciated. Thank you.

I'm currently collecting real-time heart rate data using HKWorkoutSession. I want to track when the Apple Watch is physically removed from the user's wrist during an active workout. However, I've noticed that workoutBuilder(_:didCollectDataOf:) continues to be called even after the watch is removed from the wrist. Is there a way to detect when the Apple Watch is removed from the wrist during an active HKWorkoutSession? Or is this tracking not possible through the HealthKit framework? Any guidance or alternative approaches would be appreciated.

HealthKit background delivery only triggers when charging. I have set step monitoring to hourly frequency. Despite step changes, callbacks fail to arrive after 3-4 hours on battery, but trigger immediately upon connecting power. Observed for 2 days: background updates are only received when charging. The device is not in Low Power Mode, and Background App Refresh is enabled for the app in Settings.

I don't understand why elevation data is not stored in the sample using a standard length unit. Why is it stored in HKQuantityTypeIdentifier.flightsClimbed (which is 10 feet)? Surely it is not a memory usage issue. Treadmill GATT provides elevation in meters. Using HKMetadataKeyElevationAscended for the total elevation gain throws away a lot of data. Why is there no support for weighted vest or backpack? Changing body weight is not the same and provides incorrect energy. Users want to compare workouts with different weights. I don't see any metadata key for carried weight.

I've ran into an error with the insertRouteData function of the HKWorkoutRouteBuilder that I can't seem to find any information on. The error is "Unable to find location series 1A193D3B-AFF5-41D8-A967-B1BE08D9F543 during data insert.". It seems to only happen when trying to insert very long routes, in the most recent case it was a 5 hour bike ride with 5900 samples. I save all the route data in a sqlite table as backup and after checking out the data there isn't any red flags as to why it would not insert correctly. Has anyone seen this before and could offer some insight or point me in the right direction to find the source of the error?