Hello, I am a Bluetooth Engineer at Google investigating an interoperability bug between an Android device and AirPods 4. When requesting an L2CAP connection (with PSM = AVDTP) to the AirPods during SDP service discovery, The AirPods L2CAP layer incorrectly responds with a "refused - no resources available" status followed by a Pending status and a Success status. This violates the specification, which says that the request has been fully rejected after the refused status and should not receive followup responses. I suspect the "no resources available" response is a bug. This prevents A2DP from working with the AirPods. This bug does not exist with AirPods 2 firmware. Here is a packet capture: 1602 1969-12-31 16:07:04.805261 0.062473 localhost () Apple_6b:db:09 (AirPods) L2CAP 17 Sent Connection Request (AVDTP, SCID: 0x22c6) 1603 1969-12-31 16:07:04.810953 0.005692 controller host HCI_EVT 8 Rcvd Number of Completed Packets 1604 1969-12-31 16:07:04.811078 0.000125 Apple_6b:db:09 (AirPods) localhost () SDP 27 Rcvd Service Search Attribute Request : Device Information: [Bluetooth Profile Descriptor List 0x0009] 1605 1969-12-31 16:07:04.821249 0.010171 localhost () Apple_6b:db:09 (AirPods) SDP 19 Sent Service Search Attribute Response 1606 1969-12-31 16:07:04.876396 0.055147 controller host HCI_EVT 8 Rcvd Number of Completed Packets 1607 1969-12-31 16:07:04.876464 0.000068 Apple_6b:db:09 (AirPods) localhost () L2CAP 21 Rcvd Connection Response - Refused - no resources available (SCID: 0x22c6) 1608 1969-12-31 16:07:04.942539 0.066075 Apple_6b:db:09 (AirPods) localhost () SDP 41 Rcvd Service Search Attribute Request : Unknown: [Bluetooth Profile Descriptor List 0x0009] 1609 1969-12-31 16:07:04.951052 0.008513 localhost () Apple_6b:db:09 (AirPods) SDP 19 Sent Service Search Attribute Response 1610 1969-12-31 16:07:05.010605 0.059553 controller host HCI_EVT 8 Rcvd Number of Completed Packets 1611 1969-12-31 16:07:05.080593 0.069988 Apple_6b:db:09 (AirPods) localhost () SDP 27 Rcvd Service Search Attribute Request : GATT: [Bluetooth Profile Descriptor List 0x0009] 1612 1969-12-31 16:07:05.087636 0.007043 localhost () Apple_6b:db:09 (AirPods) SDP 19 Sent Service Search Attribute Response 1613 1969-12-31 16:07:05.209417 0.121781 controller host HCI_EVT 8 Rcvd Number of Completed Packets 1614 1969-12-31 16:07:05.279491 0.070074 Apple_6b:db:09 (AirPods) localhost () L2CAP 21 Rcvd Connection Response - Pending (SCID: 0x22c6) 1615 1969-12-31 16:07:05.280731 0.001240 Apple_6b:db:09 (AirPods) localhost () L2CAP 21 Rcvd Connection Response - Success (SCID: 0x22c6, DCID: 0x0406) Please file this bug with the AirPods Bluetooth team.

Right now, I am scanning for specific BLE peripherals with my iPad app, using this: [self.cbCentralManager scanForPeripheralsWithServices:serviceUUIDsToScanFor options:@{CBCentralManagerScanOptionAllowDuplicatesKey:@YES}]; I have the "CBCentralManagerScanOptionAllowDuplicatesKey" set true because I need to be able to detect when a peripheral is no longer advertising, so I capture each "didDiscoverPeripheral" callback and set a 3-second timer that notifies the user that that peripheral is no longer in range if another didDiscoverPeripheral hasn't been received in that time. The peripherals all advertise at 100ms intervals. What's weird is that if I leave the scan on for a long time, the advertising packets slow down, and eventually one of those timers times out, around about one or two minutes for the first instance, and then every 10-20 seconds after that. I've checked with ATS for all the BLE traffic, and there are indeed > 3-second gaps in the advertising packets that the iPad sees, so it's not my code introducing the gap. Is there some reason long-running scans should not be done on iPadOS (both 18 and 26.1 used)? I've tested out switching my scan to "stopScan" and restart it every 10 seconds, and that seems to have resolved the issue, but it's unclear why that would matter (and that does not seem like an appropriate use of the stop and start scans). Thanks!

Hello everybody, I have a never ending issue with appstore review, an need a QUICK HELP ! I am submitting a new app (oral training), for Iphones only. I disabled other devices (such as Ipas) via Xcode. In the appstore informations form, it is obligatory to provide ipad screens, so I provided screens showing Iphone experience. Appstore team asked me to remove it because I don't authorize Ipads. But if I remove those screens, form cannot be sent. I don't understantd how to proceed. Thanks for the help Regards Jean

This is a regression since iOS 13. Is there no-one at Apple interested in fixing this? FB9856371

Hi there, I am using Core NFC and I established the connection with the card, but after sending the command 'tag.sendCommand()' I receive this message: -[NFCTagReaderSession _connectTag:error:]:748 Error Domain=NFCError Code=2 "Missing required entitlement" UserInfo={NSLocalizedDescription=Missing required entitlement}. The version of XCode I am using is 16.3, and the iPhone version is iOS 18.4 Here is my entitlements file: com.apple.developer.nfc.readersession.formats NDEF TAG And my info.plist: NFCReaderUsageDescription NFC com.apple.developer.nfc.readersession.iso7816.select-identifiers A000112233445566 Signing & Capabilities‌ has added Near Field Communication Tag Reading‌.

Hello, We are testing Wallet passes with iBeacons in iOS 26 Beta. In earlier iOS releases, when a device was in proximity to a registered beacon, the corresponding pass would surface automatically. In iOS 26 Beta, this behavior no longer occurs, even if the pass is already present in Wallet. I have not found documentation of this change in the iOS 26 release notes. Could you please confirm whether this is expected in iOS 26, or if it may be a Beta-specific issue? Any pointers to updated documentation would be appreciated. Thank you.

Previously discussed in beta:https://forums.developer.apple.com/message/330295This process stops responding every day it seems, I'm running 10.14.3 (18D109)When the process hangs, its Open Files and Ports include the following:txt /Library/Preferences/Logging/.plist-cache.ZP6RP0OT txt /private/var/db/timezone/tz/2018i.1.0/icutz/icutz44l.dat txt /usr/share/icu/icudt62l.dat txt /private/var/folders/35/dgpwsg457w17gs77hssnrbnw0000gn/0/com.apple.LaunchServices-231-v2.csstoreThose are not open when the service is running (before it hangs)Would like to know how frequently this hangs for everyone else and get steps to troubleshoot if possible.

when I go to software and update it says can’t check for updateS.

Hello. I have a problem with update check ! Say “ error to Check update” update section on my iPhone 16 pro. what Is the solution to fix?

Will UVC native support come for the Iphone as well? So, using external cameras with the ipad is greatly beneficial, but for the iphone, it can make it a production powerhouse! So, have there been discussions around bringing UVC support for the Iphone as well? and if so, what were your conclusions?

On iOS 18.x when try to create EASession we get nil, but on iOS 17.x everything works. We have app which use USB cable for connecting external accessories. Scenario is when we have fresh instal, connecting with accessory work fine, EASession is created, streams are opened. When we unplug USB, we close streams, remove any reference to session and accessory, remove accessory delegate. When plug it again, creating EASession is returning nil. Only after restarting iPhone, we can create new EASession with appropriate protocol and accessory. Every next attempt without reseting iPhone is failing. Logs from accessory is following: 00:05:51.811000 : onUSBDeviceFound(pDevice=0xffc818)) iPhone USB device already in the device list w/id=1 -> update status now[21;1H 00:05:51.830000 : setConnectionStatus(status=connected) [devId=1] state updated -> forward[21;1H Capabilities indicate HostMode possibility => role switch is triggered 00:05:52.848000 : updateDIPODeviceConnections() iPhoneUSB w/caps=5 (=CarPlay or HostMode), deviceTag=2 in Device mode -> request role switch[21;1H Role switch seems to be successful 00:05:54.914000 : setSwitching('stable') changed[21;1H 00:05:54.915000 : updateDIPODeviceConnections() iPhoneUSB w/caps=2, id=1, deviceTag=2 and native transport -> request app launch and call connectUSB[21;1H 00:05:54.967000 : ConnectiAP2(05ac:12a8, s/n='00008101000160921E90801E', writeFD='/dev/ffs/ep3', readFD='/dev/ffs/ep4', hostMode){3}[21;1H Native transport should become available but does not (the following line is not present for failed case. Taken from successful case) 00:05:24.983000 : OnDBusPropChanged_NativeTransport(): deviceId=2, started=1, iAP2iOSAppIdentifier=1, sinkEndpoint=3, sourceEndpoint=4, TransactionID=1 EAP Start event not received (trace line from success try) 00:05:25.057000 : EAPSessionStart(ctx=0x74e0b800){2} called[21;1H Is there any braking change on iOS 18 considering EASession? Also what is strange is that it works on fresh instal/restart iPhone, but not working on second attempt?

Dove in and upgraded two Macs today to beta 1. Unfortunately, it appears L2TP VPN is broken or something changed in the way it works. I can longer get a connection to any VPN concentrator I used previously. I tested with Cisco Anyconnect SSL VPN client and can connect to the same concentrators (as they're configured to accept L2TP or SSL clients). I also tested from my phone running iOS 16 beta and it still works for the L2TP connections. The Mac not working with L2TP VPN ppp.log shows this Fri Jun 10 19:18:52 2022 : L2TP connecting to server 'IP removed' (IP removed)... Fri Jun 10 19:18:52 2022 : IPSec connection started Fri Jun 10 19:18:52 2022 : IPSec phase 1 client started Fri Jun 10 19:19:02 2022 : IPSec connection failed Connecting a Mac successfully on 12.4 the log shows Fri Jun 10 19:12:33 2022 : L2TP connecting to server 'IP removed' (IP removed)... Fri Jun 10 19:12:33 2022 : IPSec connection started Fri Jun 10 19:12:33 2022 : IPSec phase 1 client started Fri Jun 10 19:12:33 2022 : IPSec phase 1 server replied Fri Jun 10 19:12:34 2022 : IPSec phase 2 started Fri Jun 10 19:12:34 2022 : IPSec phase 2 established Fri Jun 10 19:12:34 2022 : IPSec connection established (and then a ton more lines of the entire process ending with client getting an IP that I won't bother posting) VPN wasn't high on my list of apps I was concerned about breaking with the beta. But, now that it is broke and I need it for work I'm kinda screwed myself. Anyway, if anyone knows a way to fix this please let me know.

G'day. At my office the doors are locked with an NFC reader. We carry around a little NFC tag on our key chains which will read out a number and this then will open the door if the number matches a number in the database. I am tired of carrying around the tag, people keep loosing it, forgetting it and it would be nice to open the door using a Phone - which we tend to always have on us. So I used a credit card which is NFC enabled to readout the NFC information, added this number to the database and can now open doors using my credit card. This is pretty cool. If I forget my keys (most likely they will be on the desk but silly me left the desk without them), I may have my wallet with me. Then I tried Wallet.app on my iPhone and select the same credit card. However the door doesn't open. When looking in the door software I noticed that the tags will always transmit the same number. So does my credit card. However Wallet.app will read out 4 readings (or maybe just one very long one) and they are always different. So I can not make them match with the door database. Any ideas how to make this work? Can I give somehow wallet.app an NFC number which I can then add to my door database? Or how come the credit card and the very same one in wallet.app don't match? Thanks for your help! Would be neat if I could make this work out. This will make a lot of people happy at my office! Cheers!