We are on a .NET ecommerce site hosted on AWS on a windows 2012R2 server. We have apple pay for the web integrated on the site and the certificates (merchant id and apple pay) were set to expire shortly. We created a new merchant id and apple pay cert, however we are now stuck as the new merchant ID certificate doesn't appear to be working although the old one did. Note there have been no code changes. Basically the apple pay process is failing on the merchant validation. Here are the steps we took: Created a CSR in Keychain Access Generated a Merchant ID cert in the Apple Developer account with that CSR. Imported the Merchant ID cert back into Keychain Access and exported as a p12 file the cert and the private key used to generate the CSR. Imported the p12 file into Windows 2012 R2. I can see in our debugging that the new certificate is being loaded but a SSL/TSL connection couldn't be made. So it seems there is an issue with the cert. Has anyone encountered this? I'm out of ideas at this point and under a lot of pressure from management to fix what was supposed to be a routine maintenance issue. If anyone has any ideas, that would be greatly appreciated.

Dear Apple team and developers, We integrated Apple Pay E-Commerce on our system and made successful transaction at January using following certificates. Merchant Identity Certificate (generated from our Apple developer account) Payment Processing Certificate (generated from our Apple developer account) Payment Session Server Certificate (used following command and generated from apple-pay-gateway-cert.apple.com:443 test URL) Command: openssl s_client -connect apple-pay-gateway-cert.apple.com:443 -key MIC_priv.key -cert MIC_merchant_id.pem -showcerts | openssl x509 -outform DER > apay_ident_trusted_cert_test.der Root CA G3 (Downloaded “Apple Root CA – G3 Root” from https://www.apple.com/certificateauthority/ ) But at this month, we got new certificate problem (please check following) when we try to execute Apple Pay E-Commerce transaction. Certificate 'C=US,O=Apple Inc.,OU=Apple Certification Authority,CN=Apple Application Integration CA - G3' is not valid Certificate. What is this certificate? And Where can I download or generate this certificate from? Could you please advise/give us good information for this certificate problem? Best Regards, Bilguun Enkhbaatar

Hi All, We operate a store with a single domain but multiple merchants, some of whom use PayPal as their payment gateway, while others use Stripe. We are looking to introduce Apple Pay for the various merchants. From what I understand, a .well-known file is required for each merchant to enable Apple Pay. How can we implement this, given that our merchants are using different payment gateways? Best regards, Joe

Apple Pay processed a transaction but the account has insufficient funds. Later the transaction is declined. Is it expected from Apple Pay? Does Apple Pay throws an error if the account has insufficent funds- iOS Swift ? Does anyone know the code to handle this scenario in Swift iOS?

When running the test app with test flight before actually opening the app, the execution region is Korea and the country code is Korea, but the currency code on the payment screen is displayed as dollars or euros instead of won. In the payment settings, the currency code is set to won for Korea and dollars for the United States, and the European region is not set at all, but in some phones it is displayed as euros, and in some phones it is not like this, and in some cases it is displayed as won normally.

When integrating the Wallet Extension, after clicking my app icon from the "From Apps on Your iPhone" list, I encountered the message: "Cannot Add Card. '***' is not responding. Wait a few minutes and try again. If the problem continues, contact the card issuer's customer service" instead of the configured login page appearing as expected. What could be causing this issue, and how should I resolve it?

We have integrated the card provisioning in Apple wallet for quite sometime now through an external processor and we got the App Entitlement for the same. Now we are building the card provisioning in Apple Wallet flow in our app. Though everything seems to work fine (including issuer certificates, nonce etc.) but when we are clicking on ADD button on card details screen, I am getting an error saying "Could Not Add Card". When I inspect the error from didFinishAddingPaymentPass, it reads "The operation couldn’t be completed. (PKPassKitErrorDomain error 2.)". Though the Apple documentation suggests it as an unsupportedVersionError but it does not say anything beyond that. I want more detailed explanation because of which I am getting this error

We have an app and we want to add tap to pay for Apple Pay. We'd also like to become a certified Payment Service Provider. What is the process to become a certified PSP?

When apple pay on the web does a onshippingcontactselected it appears to truncate the zip code. If I enter: 11111 or 11111-1111 I always get 11111. Is there any way to get the plus 4?

We have a checkout page on which clients can configure the providers we've integrated with for each currency. One such provider is Stripe, with which we have already integrated ApplePay and host a merchant domain association file. Now, we're getting requests to support ApplePay with other providers. The issue is that we can't tell Apple to use a different path to domain association file for domain verification. And, replacing the existing domain association file seems like a hack, since I believe it's needed for domain re-verification. We're thinking of using subdomains for serving the domain association files for different providers. But, we have some questions on how ApplePay domain verification works to understand how we can solve our problem. Firstly, can we use subdomains for individual domain verification? If we already have example.com verified with Stripe, can we serve the domain association file for the other provider with provider.example.com and have the verification work? Secondly, let's say our domain is example.com, and we can use provider.example.com to serve the domain association file and verify the domain. Then on example.com/checkout, will using an iframe with provider.example.com/applepay to host the ApplePay button work? This thread suggests otherwise, but we want to confirm. Lastly, is the only way to make an ApplePay payment for provider.example.com to use that subdomain? So redirecting to provider.example.com/applepay would work? Thanks for your help!

Hi there, is there a way, or a list of test cards, to simulate error on payment in an Apple Pay sandbox environment ? I tried different cards mentioned here but every try was successful : https://developer.apple.com/apple-pay/sandbox-testing/

Hi - I have a question. I am trying to understand when Apple Pay will be available on non-IOS desktop devices (specifically Google Chrome). I was hoping to understand better the process, specifically the following: How can I get the Apple Pay QR code installed on my desktop checkout page on Google Chrome? How long does this process usually take? If I work with Stripe, do I need to get approval from them to install the Apple QR code onto my Google Chrome checkout page? Is this readily available to all merchants (i.e., installing Apple Pay on Google Chrome)/ I have not seen this on any other checkout pages yet. Are there any examples you could point me to of merchants that have installed Apple Pay onto non-IOS desktop so I could trial the process (i.e., a list of existing merchants that have put the QR code onto their Google Chrome checkout pages)?

When integrating the Wallet Extension, after clicking my app icon from the "From Apps on Your iPhone" list, I encountered the message: "Cannot Add Card. 'XXX' is not responding. Wait a few minutes and try again. If the problem continues, contact the card issuer's customer service" instead of the configured login page appearing as expected. What could be causing this issue, and how should I resolve it?

Hello, we are developing in app provisioning of our American Express network cards. After clicking add to apple wallet in our app, I launch the PKAddPaymentPassViewController and click next. It loads for a few seconds and then I get: [<private>] ProvisioningOperationComposer: Step '<private>' failed with error Error Domain=PKProvisioningErrorDomain Code=5 UserInfo={PKErrorHTTPResponseStatusCodeKey=500} Does anyone have any insight on what this error means?

This error occurs in Apple Pay Wallet In-App Provisioning Flow for Credit / Debit Cards When the data received from the PNO (Visa) is passed to PKAddPaymentPassRequest this error is seen in addPaymentPassViewController, in the finalize stage. Docs provide no clue as to what could be wrong. iOS 18.2.1 XCode 15.2 Error description mentions "unsupportedVersionError" Is the pass version not supported? Is the wallet version not supported? Is it an app implementation error or error in the data received from the PNO?

I tried to test In-App Provisioning in Production for our whitelisted app through TestFlight (Internal Testing Track) and we received the following error response from PassBook during the provisioning attempt, Could you please guide us? Error Response from sysdiagnose PassBookUIService during In-App Provisioning attempt: { statusCode = 500; statusMessage = "Broker Service Response exception"; } I reported the error in Feedback Assistant: ID: FB16112348 (500 Broker Service Response exception during Apple Pay In-App Provisioning ). Note:- I am reffering to Getting Started with Apple Pay: In-App Provisioning, Verification, Security, and Wallet Extensions

We have implemented In-App Provisioning, but when I start the tokenization process, I receive an error before the terms and conditions. We are testing with a version of the app on TestFlight. The error message is: Could not add card. Try again later or contact your card issuer for more information. Could you please help me?

I'm implementing Apple Pay in my Flutter web app and I'm following the guidelines for domain verification using the apple-developer-merchantid-domain-association file. When I access the file at https://mydomain.com/.well-known/apple-developer-merchantid-domain-association through my web app, the browser silently downloads the file instead of displaying its content on the webpage. My question is: Is this the expected behavior for the apple-developer-merchantid-domain-association file? Should the browser download the file silently, or is there another step required, such as displaying the content on the webpage for verification purposes? I've consulted some resources and they indicate that the file download is the correct behavior. However, I'd appreciate confirmation from the community to ensure I'm implementing the verification process correctly. Summary is how do we know if apple has verified it?

I have the HCE entitlements, but it's not clear from the documentation I have, how to configure my app as the default app for the double tap of the power button. Nor can i see where this is in iOS 18.2 settings. The closest I can find is 'Settings > Default Apps > Contactless App', which still shows only Wallet after I install my app with all the new entitlements and provisioning profile. I have these entitlement successfully provisioning my app: <key>com.apple.developer.nfc.hce</key> <true/> <key>com.apple.developer.nfc.hce.iso7816.select-identifier-prefixes</key> <array> <string>A0000000031010</string> <string>A00000002501</string> <string>A0000000049999</string> <string>A0000000041010</string> </array> <key>com.apple.developer.nfc.hce.default-contactless-app</key> <true/> The documentation here: https://developer.apple.com/support/hce-transactions-in-apps/ also references a link to changes in Info.plist, but the url takes me to storekit-external-entitlement documentation about dating apps in the netherlands ???!!!??? Any help would be appreciated to at least get started by allowing me to change the double tap action to my app. Thanks

Hi, I’m encountering an issue in my app’s Wallet Extension, specifically within the Non-UI Extension, where we are unable to retrieve payment passes bound to a user’s account. The same code that successfully retrieves these bound cards in the main app does not work when used in the Non-UI Extension. Case-ID: 8932090 Steps to Reproduce: Set up In-App Provisioning: Ensure that the app has the necessary In-App Provisioning permissions. This functionality works correctly in the main app, confirming that the permissions are properly configured. Configure Wallet Extensions: Follow the Wallet Extensions documentation to configure the app, including all required settings for the Non-UI Extension. Add Code to Retrieve Payment Passes: In the main app’s LoginView, implement the following code in the handleLogin() method to retrieve payment passes: // Get the identifiers of payment passes that already exist in Apple Pay. paymentPassLibrary = self.passLibrary.passes(of: .secureElement) for pass in paymentPassLibrary { if let identifier = pass.secureElementPass?.primaryAccountIdentifier { if pass.isRemotePass && pass.deviceName.localizedCaseInsensitiveContains("Apple Watch") { remotePassIdentifiers.insert(identifier) } else if !pass.isRemotePass { passIdentifiers.insert(identifier) } } } Verify Functionality in Main App: Run the app and verify that the code successfully retrieves the payment passes bound to the user’s account. Implement Code in Non-UI Extension: Add the same code to the Non-UI Extension, specifically in the WNonUIExtHandler class within the override func status(completion: @escaping (PKIssuerProvisioningExtensionStatus) -> Void) method. Test in Wallet Extension: Run the Wallet Extension and observe that the payment passes are not retrieved when the code is executed in the Non-UI Extension. Has anyone encountered a similar issue or can provide insight into why the code might not work in the Non-UI Extension compared to the main app? Support Information: iOS Version: 17.5.1 Development environment: Xcode 15.4 (15F31d), macOS 14.3 (23D56) Any help or suggestions would be greatly appreciated. Thank you!